×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

120R LOADER

Loader

  • Compatible with the 1023E, 1025R and 2025R tractors
  • Quik-Park stands for easy attachment and removal
  • up to 553 lb (251 kg) lift capacity
  • Mechanical Self-Leveling (MSL) Loader option with up to 726 lb (330 kg) lift capacity






Features



Quik-Park™ loader mounting systemQuik-Park™ loader mounting system
#

The Quik-Park mounting system on the 120R Loader is designed for easy removal and mounting to and from the tractor without tools.

 

Just like on the former H120, the parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.

Easy removal and mounting (shown on a noncurrent 1026R)Easy removal and mounting (shown on a noncurrent 1026R)
Mount to and from the tractor without toolsMount to and from the tractor without tools
D120
#

The D120 does not utilize the Quik-Park system as used on the 120R, but rather has two parking stands that are stored within the torque tube for a manual parking process.

 

Remove the parking stand from the torque tube area and place within the loader foot plate during the parking process (as shown).

Once the loader weight is being supported by the bucket and parking stands, manually remove the pins from the mast assembly and disconnect hydraulics.

#
#

 After installing the parking stands, removing the parking pins and disconnecting hydraulics, simply back away.

#
Pivot pinPivot pin
Pivot pins shown on the 120R LoaderPivot pins shown on the 120R Loader

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Specifications


Compare the specifications of up to 4 models

Key Specs 120r-loader
Current Model
Maximum lift height (A)1828 mm
72 in.
Lift capacity at full heightMeasured at pivot (U)
364 kg
803 lb
Measured at 500 mm ahead of pivot (V)
251 kg
553 lb
Boom breakout forceMeasured at pivot (Y)
890 kgf
1963 lbf
Measured at 500 mm ahead of pivot (Z)
606 kgf
1335 lbf
Bucket rollback force capacityAt ground-level line (ZZ)
753 kgf
1659 lbf
Clearance at full height - bucket dumped (C)1304 mm
51.3 in.
Dump angle, degrees (E)-40.5 degree (angle)
Rollback angle, degrees (G)30.08 degree (angle)
Tractor
Model2025R/2026R
Front tire23x8.50-12 6PR R4 CL
Rear tire12.00-16.5 6PR R4 CL
Front axle configuration
Wheelbase1600 mm
Pump capacity26.5 L/min
Rated pressure2146 psi
Loader
Base weight283.88 kg
Leveling configuration
Bucket usedMaterials 1350 mm
Bucket weight83 kg
183 lb
Lift capacity at full heightMeasured at pivot (U)
364 kg
803 lb
Measured at 500 mm ahead of pivot (V)
251 kg
553 lb
Lift capacity at 59 in. (1500 mm)Measured at pivot (W)
434 kg
957 lb
Measured at 500 mm ahead of pivot (X)
312 kg
688 lb
Boom breakout forceMeasured at pivot (Y)
890 kgf
1963 lbf
Measured at 500 mm ahead of pivot (Z)
606 kgf
1335 lbf
Bucket rollback force capacityAt maximum height (VV)
648 kgf
1428 lbf
At 59-in. (1500-mm) lift height (XX)
777 kgf
1713 lbf
At ground-level line (ZZ)
753 kgf
1659 lbf
DimensionsMaximum lift height (A)
1828 mm
72 in.
At full height - bucket level(B)
1666 mm
65.6 in.
At full height - bucket dumped (C)
1304 mm
51.3 in.
Overall length (I+F), ft (m)2888 mm
113.7 in.
Overall height in carry position (J)
Digging depth (H)-86 mm
-3.4 in.
ReachAt maximum height (D)
698 mm
27.5 in.
At ground level - bucket level (F)
1288 mm
50.7 in.
Bucket angleDump angle, degrees (E)
-40.5 degree (angle)
Rollback angle, degrees (G)
30.08 degree (angle)
Dump angle, ground
-115.4 degree (angle)
Cycle timesLoader raise, seconds
3.7 seconds
Loader lower, seconds
2.6 seconds
Bucket dump, seconds
4.1 seconds
Bucket rollback, seconds
2.5 seconds