×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

AUTO TRAC UNIVERSAL 300

Universal 300

  • Automated setup. Simply press the calibrate button, drive a few hundred feet and the software calculates the right settings for your equipment
  • Smaller and quieter with a more comfortable steering wheel
  • Dust and moisture resistant for use with an open station tractor






Features



AutoTrac™ Universal 300 used in a combine AutoTrac™ Universal 300 used in a combine

The AutoTrac Universal 300 steering kit is a mobile guidance solution that brings additional productivity to farming operations throughout the growing season.

 

The AutoTrac Universal 300 is compatible GreenStar™ 2 1800 and 2600 Displays, GreenStar 3 2630, and Gen 4 4240 and 4640 Universal Displays. It is compatible with StarFire™ 6000 and StarFire 3000 Receivers. The AutoTrac Universal 300 is not compatible with the original GreenStar display.


AutoTrac Universal 300 is approved on over 600 different equipment platforms and is compatible with many agricultural vehicles with steering systems in good mechanical condition.

The benefits of the AutoTrac Universal 300 over the AutoTrac Universal 200 include:

  • Improved on-track line performance
  • Weather-resistant design (open station approved)
  • Faster line acquisition
  • Improved diagnostics
  • Easy-to-use calibration for quicker setup
AutoTrac Universal 300 steering kit AutoTrac Universal 300 steering kit
Quick and easy setup Quick and easy setup

With the portable AutoTrac Universal 300 steering kit, producers can leverage their investment in AutoTrac across many different machines throughout the growing season, providing year-round payback on this investment. Moving from machine to machine is easier than ever with the updated calibration procedure that eliminates many steering setting adjustments.

NOTE: AutoTrac Universal 300 has a different algorithm and requires calibration. Entering the same settings as found in the AutoTrac Universal 200 could result in poor performance.

Achieve critical accuracy of in-field operations Achieve critical accuracy of in-field operations
Achieve critical accuracy of in-field operations Achieve critical accuracy of in-field operations

As equipment gets larger and margins tighter, accuracy of in-field operations and input placement is more critical than ever.

When making a pass in a field, traveling from one end of the field to another, the position accuracy of the return pass is critical. Pass-to-pass accuracy means the planter guess rows will be accurate and subsequent passes are less likely to result in crop damage.

Repeatability defines how accurately the receiver calculates its position over a relatively long time window.

AutoTrac™ assisted steering system greatly increases operator productivity by maintaining consistent accuracy and efficiency. Operators remain more alert while they are in the field and are able to focus on implement settings and varying field conditions. AutoTrac also allows operators to confidently create evenly spaced rows past sunset, as well as in rain, dust, or fog.

AutoTrac increases productivity AutoTrac increases productivity

AutoTrac also improves operator comfort as the operator has time to concentrate on implement tasks.

Reduce compaction with AutoTrac™ guidance system Reduce compaction with AutoTrac™ guidance system

As tractors and field equipment become larger and heavier, there is a growing concern about soil compaction. Heavy equipment and tillage implements can cause damage to the soil structure. Soil structure is important because it determines the ability of a soil to hold and conduct water, nutrients, and air necessary for plant root activity.

 

By using AutoTrac, operators can optimize the number of passes and reduce compaction. Additionally, the operator can confine traffic between certain rows and avoid compacting the row area.

 

AutoTrac allows producers to use the same traffic lanes year after year, sacrificing a small portion of the field in favor of having no wheel traffic in the majority of the field. Restricting traffic to specific lanes also provides a firm soil surface for more efficient tractor operation.

 

Without using AutoTrac during field operations, there is tendency for passes to overlap. Each pass over a field under poor conditions can cause significant damage to the soil.

AutoTrac™ guidance steering system allows operators to use tramline management more effectively, minimizing soil compaction. Additionally, AutoTrac allows the machine operator to select from a variety of guidance modes including straight track, AB curves, adaptive curves, circle track, boundary fill, machine access, and swap track. These tracking options allow the operator to select the track best suited for the field and conditions reducing the number of passes needed to cover the field.

Curve track
Curve track Curve track

The curve track mode helps operators by automatically steering curved guidance lines on terrain that does not allow for straight track to be used (rolling hills or contours).
 
When running with curve track, keep in mind these basic principles:

  • Straight track is more accurate than curve track.
  • A machine with an integrated AutoTrac steering kit is more accurate than a machine with the AutoTrac Universal steering kit.
  • Slower speeds are more accurate than faster speeds.
  • Gentle curves are more accurate than tight turn radius curves.
Types of curves
Simple curve

S-curve

Boxed

Racetrack

Spiral

Circle

 

Two different modes can be used depending on the type of curves that need to be created: adaptive curves or A/B curves.

 

Adaptive curve track

 

This track allows the operator to record a manually driven curved guidance line. Operators using a GreenStar™ 3 2630 Display have the ability to record and utilize multiple adaptive curves per field. This feature is especially useful as operators maneuver around terraces or irregular, constantly changing fields. Adaptive curve mode also has the ability to connect line segments when documentation is selected as the recording source. Self-propelled forage harvester or combine operators may find this functionality useful if they need to quickly raise their header for any reason.

The curve adapts, if driven around an obstacle The curve adapts, if driven around an obstacle
The curvature of the line changes down the field The curvature of the line changes down the field

A/B curve track 

 

This track allows the operator to set a curved line in a field with two end points (A and B) and will generate guidance lines parallel to the initial track in either direction.

Skip pass Skip pass
#

The line stays the same across the field, and an operator can use skip track.

Field obstacles Field obstacles
#

Even if an operator drives around an obstacle in the field, the next pass follows the original track line.

Straight track
Subsequent passes are identical to the first pass Subsequent passes are identical to the first pass
#

The straight track mode helps operators by automatically driving straight. Operators can create an initial straight line using a variety of different setup options.

 

Once the track has been defined, all subsequent track lines in the field are created parallel to each other at the defined track spacing distance.

Manual circles with Parallel Tracking guidance systemt
Circle track mode on the display Circle track mode on the display
#

The circle track mode helps operators drive concentric circles in a field when a circle is set up and guidance is being used. Operators can create an initial circle using a variety of different methods. Once the initial circle has been defined, all the subsequent circles in the field are created.

 

Circle track is available in Parallel Tracking mode. Pivot Pro activation must be purchased to use circle track with automatic guidance.

Concentric circles with Pivot Pro
Pivot Pro tracking mode Pivot Pro tracking mode
#

The Pivot Pro module allows the operator to automatically guide a machine in defined concentric circles in fields with center-pivot irrigation systems.

 

Circle track functionality is included with GreenStar Basics, allowing the operator to manually guide the machine around the concentric circle without an upgrade activation. Pair Pivot Pro activation with GreenStar AutoTrac to have the machine drive circles automatically.

 

Pivot Pro is approved for level fields, as accuracy can be degraded as slope increases. If there is slope in the field, there is the potential the circle track space and the center-pivot tower track will not match up. Keep in mind, AutoTrac draws the circle spacing as if the plane were level.

Follow track mode reduces compaction
Active Implement Guidance™ uses the follow track mode Active Implement Guidance™ uses the follow track mode
#

Unique to John Deere Active Implement Guidance, the follow track mode assists the driver when operating headlands or navigating around obstacles, allowing the implement to follow the tractor guidance path. This helps reduce crop damage and soil compaction.

Tramline management
Tramline screen Tramline screen
#

Tramline management provides the opportunity to setup and edit certain guidance lines as tramlines. Those lines will be highlighted in a separate color in the guidance screen. Tramline management is available on the GreenStar 3 2630 Display in straight track, AB curve, and circle track modes.

Tramlines can be set and stored for each A-B line in the display. This allows the operator to properly seed and plant fields with accurate tramlines defined. This will make it easier to reduce inputs on all following field operations such as spraying.

NOTE: Tramline management is not currently available on the GreenStar 3 CommandCenter™ controls.

Swap track
 
Swap track provides operators the ability to quickly switch guidance modes as they work through fields varying geographic conditions. Operators can easily move from straight track to any of the other tracking modes as needed. Swap track allows the operator to toggle between up to four different guidance lines within the same field on the GreenStar 3 2630 Display. Operators can also change the track order while AutoTrac is engaged.
 
Swap track is available on the GreenStar 3 2630 Display.
 
NOTE: Swap track is not available on the GreenStar 3 CommandCenter.

Specifications