×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

2100 MINIMUM TILL RIPPER

Minimum Till Ripper

  • Variety of working widths available
  • Mainframe extensions
  • Setback brackets for staggered standard pattern
  • 3/4-in. straight shear-bolt standard minimizes soil and residue disturbance



View Product Brochure



Features



19-mm (0.75-in.) ripper standard19-mm (0.75-in.) ripper standard
#

The 19-mm (0.75-in.) straight shear-bolt standard design moves through the soil minimizing soil and residue disturbance at the soil surface.

  • Equipped with replaceable wear shins to control wear on the leading edge of the shank that greatly extends the life of the standard, unlike some of the competitive models
  • Can only be equipped with 64-mm, 178-mm, or 254-mm (2.5-in., 7-in., or 10-in.) min-till ripper points

The 19-mm (0.75-in.) straight standard is base equipment. It is also available as an attachment for field conversion.

The 2100 Minimum-Till Ripper is available in working widths from 2.29 m to 6.86 m
(7 ft, 6 in. to 22 ft, 6 in.).

 

Working width

Number
of standards

Spacing

2.29 m (7 ft, 6 in.)

3

762 mm (30 in.)

2.74 m (9 ft)

3

914 mm (36 in.)

3.05 m (10 ft)

4

762 mm (30 in.)

3.81 m (12 ft, 6 in.)

5

762 mm (30 in.)

4.57 m (15 ft)

5

914 mm (36 in.)

5.33 m (17 ft, 6 in.)

7

762 mm (30 in.)

6.86 m (22 ft, 6 in.)

9

762 mm (30 in.)

6.86 m (22 ft, 6 in.) fold

9

762 mm (30 in.)

 

Frame on seven-standard modelFrame on seven-standard model
#

The frame is constructed with a 102-mm x 152-mm x 10-mm (4-in. x 6-in. x 0.375-in.) cross tube on three-, four-, five-, and seven-standard machines and 152-mm x 152-mm x 10-mm (6-in. x 6-in. x 0.375-in.) cross tube on nine-standard models where the hitch-mounting components are welded for maximum strength.

 

Truss tubes connect the cross tubes and are constructed with 127-mm x 127-mm x 13-mm (5-in. x 5-in. x 0.5-in.) steel tubing.

 

Welded together into one assembly, the frame is designed to handle the most severe operating conditions.

 

The mainframe is 4.06-m (160-in.) wide and is the same whether there are five shanks on 762-mm (30-in.) spacings. Frame extensions make this task possible and make configurations easier to adjust.

Nine-standard drawn hitchNine-standard drawn hitch
#

A drawn hitch option is available for those who want to use large row-crop tractors or 4WD tractors without a 3-point hitch.

The drawn hitch is only compatible with seven-standard and nine-standard 762-mm (30-in.) models. The drawn hitch is also available as an attachment for field conversion.

The transport wheels are placed in front of the front rank of the mainframe. This allows residue to flow freely and keeps the wheels close to the standards to allow the ripper to follow the ground contour.

The wheel modules are mounted to the front, rear, and end frame of the ripper, making it the most stable wheel package in the in-line ripper market. The tires are placed directly in front of the ripper standards so the shanks can remove the tire track in order to leave as level a profile as possible.

There is no need for stabilizer wheels with the drawn hitch. The wheels are located within 762-mm (30 in.) of the outside edge of the machine to provide stability in both field and transport conditions.

The nine-standard model has eight-bolt hubs and spindles with beefy 12.5L-15 tires. The seven-standard model uses 11L-15 tires. The large tires provide excellent field flotation and transport stability.

A pressure-compensating flow divider is the heart of the depth control system. Temporary adjustments can be made while maintaining the ability to raise and lower evenly.

The machine does not need to be fully raised at the end of a pass to keep the cylinders in phase, and cylinder stops are used to set the overall operating depth.

NOTE: The drawn hitch attachment is only compatible with serial number 1300 or newer machines.

Seven-standard drawn hitch foldedSeven-standard drawn hitch folded
Closing wheelClosing wheel
#

Closing wheels can be added to the rear of the 2100 Minimum-Till Ripper with 19-mm (0.75-in.) standards.

Closing wheels offer the following benefits:

  • Minimize surface disturbance created by the standard
  • Provide more adjustments to match farming practices and varying soil conditions than competitive models
  • 114 kg (250 lb) of down pressure
  • Mounted close to the shank, allowing a high trip clearance for operation through washouts, etc.
  • Mounted with an L-bracket, allowing better soil and residue flow
Straight blade shownStraight blade shown

Cushion coulters cut and size residue and pre-slice the soil to allow a more level soil profile:

  • 559-mm x 5-mm (22-in. x 0.177-in.) straight blade is in base equipment and allows the least amount of soil and residue disturbance.
  • 559-mm x 5-mm (22-in. x 0.177-in.) rippled blade is optional equipment for use when increased soil movement is desired.
Adjustable stabilizer wheelsAdjustable stabilizer wheels
#

Two adjustable 521-mm x 203-mm (20.5-in. x 8-in.) stabilizer wheels are included in base equipment to ensure straight travel and provide support on three-, four-, five-, and seven-standard sizes. The nine-standard size has four stabilizer wheels.

 

The stabilizer wheels are designed to stabilize the unit and are not intended to be used as depth gauge wheels. The weight of the unit must be carried on the tractor.

Additional stabilizer wheels and tires can be added if field conditions warrant more support.

Specifications


Compare the specifications of up to 4 models

Key Specs 2100-minimum-till-ripper
Current Model
Working width2.3 m 7.5 ft
2.7 m 9 ft
3.05 m 10 ft
3.8 m 12.5 ft
4.6 m 15 ft
5.3 m 17.5 ft
6.8 m 22.5 ft
Transport width3.05 m 10 ft
4.1 m 13.5 ft
5 m 16.5 ft
6.7 m 22 ft
4.7 m 15.5 ft
Operating depthMaximum
40.6 cm
16 in.
Miles per hour6.4-8 km/h
4-5 mph
Horsepower per standard22.3-29.8 kW
30-40 hp
Depending on soil type, moisture, and depth of operation
NOTE: Maximum compatible tractor engine - 231.2 kW
310 hp
Spacings76.2 cm
30 in.
91.4 cm
36 in.
Tool configuration
TypeIn-line ripper
Option 1Standard: 3, spacing: 76.2 cm
30 in.
Option 2Standard: 3, spacing: 91.4 cm
36 in.
Option 3Standard: 4, spacing: 76.2 cm
30 in.
Option 4Standard: 5, spacing: 76.2 cm
30 in.
Option 5Standard: 5, spacing: 91.4 cm
36 in.
Option 6Standard: 7, spacing: 76.2 cm
30 in.
Option 7Standard: 9, spacing: 76.2 cm
30 in.
Rigid
Option 8Standard: 9, spacing: 76.2 cm
30 in.
Folding
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Working width
Option 12.3 m
7.5 ft
Option 22.7 m
9 ft
Option 33.05 m
10 ft
Option 43.8 m
12.5 ft
Option 54.6 m
15 ft
Option 65.3 m
17.5 ft
Option 76.8 m
22.5 ft
Option 86.8 m
22.5 ft
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Transport width
Option 13.05 m
10 ft
Option 23.05 m
10 ft
Option 33.05 m
10 ft
Option 44.1 m
13.5 ft
Option 54.1 m
13.5 ft
Option 65 m
16.5 ft
Option 76.7 m
22 ft
Option 84.7 m
15.5 ft
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Operating depth
Frame
Size102x152x0.9.5 mm
4x6x0.375 in.
9 standard: 152x152x9.5 mm
6x6x0.35 in.
Maximum underframe clearance89 cm
35 in.
Operating speed
Horsepower required
Depth control
Option 13-point hitch for integral
Option 2Single point for pull-type
Option 3
Hydraulic requirements
Option 1Pull type: 1 SCV (lift) at 17,237 kPa
2500 psi
for optimum raise times
Option 2Low transport: 1 SCV (fold) at 17,237 kPa
2,500 psi
for optimum raise times
Hitch
OptionsIntegral, or 7- or 9-standard pull type
Three-point hitch requirementsCategory 2, Category 3 and 3N (with Quik-Coupler)
Pull-type descriptionLevel Lift
Standard options
Spacings76.2 cm
30 in.
91.4 cm
36 in.
Option 1Trip force
Shear bolt: 3,265.9 kg
7,200 lb
Standard type
19 mm
0.75 in.
or 31.75 mm
1.25 in.
Straight with wear shin
Shear-bolt
Option 2Trip force
1,451.5 kg
3,200 lb
Trip height
30.5 cm
12 in.
Standard type
19 mm
0.75 in.
Cushion trip
Option 3

Option 4

Ground-engaging components
Coulters
Description
TypeSpring cushion coulters
Pounds of forceNormal working load: 272.2 kg
600 lb
Deflection of: 10.2 cm
4 in.
Maximum trip load: 362.9 kg
800 lb
Deflection of: 20.3 cm
8 in.
BladesStraight or rippled: 559x4.5 mm
22x0.177 in.
Closing wheel attachment
DescriptionTwo adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. Drawn hitch machines do not require stabilizer wheels.
Down force113.4 kg
250 lb
Size10.2x40.6 cm
4x16 in.
Spacing19.05 to 35.6 cm
7.5 to 14 in.
Angle adjustments0 to 15 degree (angle)
Stabilizer/gauge wheels
TypeStabilizer wheels
Wheels52.1x20.3 cm
20.5x8 in.
Tires10 PR
Pull-type wheels
Description12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles
Additional featureReplaceable wear shin
Option 1Set back brackets
Option 2
Option 3
Option 4