×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

636M MOWER

QuikTrak™ Stand-On Mower

  • Compact design for easy hauling
  • Hydrostatic drive system
  • Commercial-quality engine
  • Easy to maintain



View Product Brochure



Features



636M showing compact design636M showing compact design
636M showing compact design636M showing compact design

From the operator's platform to the mower deck, John Deere QuikTrak™ Mowers have a compact and functional design:

  • The compact design allows the QuikTrak to operate in tighter areas that a larger machine cannot. Often, this means the area can be mowed with a QuikTrak so it is not necessary to switch to a walk-behind mower, which helps reduce the time on site.
  • With the compact design of QuikTrak Mowers, less space is required on a truck or trailer - which can mean there is room for an extra mower, resulting in less time on property, saving time and money.
636M QuikTrak636M QuikTrak
636M QuikTrak636M QuikTrak

Whether mowing hills or on level terrain, trimming or mowing straight-away, the operator of a John Deere QuikTrak is able to affect the performance of the machine with their body:

  • The compact design of the QuikTrak allows the operator to use their body to help control the machine.
  • The innovative QuikTrak design puts the operator in line with the rear axle to keep traction  when mowing across slopes, providing greater control.

  • Faster ground speeds get work done quicker.
  • Better traction on slopes gives more control and increased productivity.
  • Superior stability gives more control and confidence when operating.
  • Better visibility allows for quick operator reaction times to changing terrain and obstructions.
  • Standing area is designed for improved range of motion to allow the operator more room to move and avoid obstacles.
  • Minimal operator station obstruction allows safe and fast exits for clearing mower-path obstacles.
  • Operator area is designed for more comfort and less fatigue.
Inset caster wheels (636M shown)Inset caster wheels (636M shown)
Inset caster wheels (636M shown)Inset caster wheels (636M shown)

John Deere QuikTrak Mowers are designed, tested, and manufactured to provide the best commercial mowing machines available:

  • Bull-nosed shape of the front edge of the mower deck allows caster wheels to be set back further, closer to the blades, for more effective ground following capability.
  • Compact design takes less space for mowing tighter areas and may allow room for an extra machine when hauling to the worksite.
QuikTrak™ mower deckQuikTrak™ mower deck
Mower-deck reinforcementMower-deck reinforcement

A well-designed mower deck can make the difference between just getting the job done and getting eye-catching results. The 7-gauge, 0.179-in. (4.6-mm) fabricated mower deck delivers a higher quality of cut in more diverse conditions to enhance mowing performance.

Key features of the fabricated mower deck include: 

  • The mower deck is manufactured from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • A compact footprint delivers greater maneuverability when working in tight quarters.
  • A deep-deck design delivers excellent airflow so material is processed quickly and efficiently.
  • A powerful vacuum effect is created by the deck's unique air-flow design, which pulls more grass upright so that the blades can cut more evenly.
Flexible mower-discharge deflectorFlexible mower-discharge deflector
Caster wheelsCaster wheels

The wide-discharge opening and raised deflector provide even clipping dispersal for an excellent finished appearance in all conditions.

Caster wheels with flat-free tires contribute to a smooth, even cutting job:

  • Large, flat-free caster wheels carry the mower deck smoothly over the lawn.
  • Caster wheels are recessed to reduce the vehicle footprint and turning radius.
    • With the wheels less exposed, there is less chance they will get snagged by immovable obstacles, thus improving maneuverability and reducing damage.

 

Mower lift lever (raised position)Mower lift lever (raised position)

The QuikTrak is equipped with a floating mower deck that offers several advantages over a fixed mower deck:

  • The lift lever allows the operator to raise the mower to the full-up position from the operator's station.
    • Convenient when transporting from one mowing area to another and when loading/unloading.
    • Allows the operator to raise the mower over roots or other obstructions in the lawn on the fly.
  • Lift-assist springs reduce the effort required to raise the mower deck.
Cutting-height adjustmentCutting-height adjustment
Easy-to-remove mower deck shieldsEasy-to-remove mower deck shields

Mower cutting height can be set from 1.25 in. (3.2 cm) to 5 in. (12.7 cm) in 0.25-in. (0.64-cm) increments:

  • Pull the lift lever back to the full-raised position.
  • Remove the tethered pin and place it at the desired cutting height.
  • Lower the lift lever; the lift lever and mower will stop at the desired cutting height.

Mower deck shields are easy to remove for access to the drive belt and other service points.

Optional mulching attachment
Optional mulching attachment and blades (similar design shown)Optional mulching attachment and blades (similar design shown)

Optional mulching attachment and special mulching blades are available:

  • This is a high-performance mulching attachment that includes formed steel baffles to control the material for superior performance.
  • The special mulching blades can also be used for side discharging, though overall cutting performance may be slightly less than with the standard blades.
EngineEngine
Air cleaner accessAir cleaner access

A commercial-quality, 18.5-hp (13.8-kW) at 3600 rpm, air-cooled engine powers the QuikTrak™ Mower:

  • Overhead valve design
    • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
  • Full-pressure lubrication with full-flow filter
    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Filtered oil reduces risk of contamination for increased engine life
  • V-twin design
    • Fast starts
    • Smooth operation
  • Vertical shaft for efficient transfer of power to the transmission and mower
  • Standard dual-stage air cleaner
  • Fuel pump for consistent and reliable fuel supply to the carburetor
  • 50-state compliant engine, which complies with strict U.S. Environmental Protection Agency and California Air Resources Board emission standards without loss of horsepower or torque
  • Air-cooled engine design for minimum maintenance and maximum reliability
  • Standard cleanout ports for easy access to remove debris collecting in cooling fins.
  • Aluminum cylinder block
    • Effectively dissipates heat
    • Lightweight and strong construction
    • Extends engine life due to elimination of debilitating engine temperatures
Engine oil-fill/check tubeEngine oil-fill/check tube

The engine is equipped with a replaceable oil filter for longer engine life.

Engine oil fill/check tube, oil filter, and oil drain are located close together for easy and convenient service.

636M QuikTrak™ Mower mowing636M QuikTrak™ Mower mowing
Hydrostatic pumpsHydrostatic pumps

QuikTrak Mowers use a heavy-duty hydrostatic pump and wheel-motor drive system that gives reliable and consistent performance and long life:

  • Heavy-duty components stand up to the rigors of commercial use.
  • Individual pump and wheel motor design allows placement of these heavy components low in the vehicle for a low center of gravity and excellent hillside stability.

Two Hydro-Gear™, 0.61-cu in. (10-cc) axial piston, variable-displacement pumps provide hydraulic power to the wheel motors:

  • Pumps are linked to the hand-control levers to allow the operator to make speed and direction changes.
  • Rugged construction is ideal for high-performance commercial use.
  • Piston design gives efficient and consistent performance. 
  • A replaceable hydraulic filter helps ensure long life of the pumps and wheel motors.

Two individual, 12-cu in. (196.6-cc), piston wheel motors power the QuikTrak drive wheels. Their heavy-duty construction and super-efficient axial-piston design provides superior performance and seamless power to the wheels:

  • Integrated high-pressure shaft seal gives greater reliability.
  • Large bearings are designed with the capacity to carry heavier loads and give long life.
Transmission oil filterTransmission oil filter
Transmission fluid oil reservoirTransmission fluid oil reservoir

A spin-on-type replaceable hydraulic oil filter is conveniently located:

  • Extends life of transmission components by keeping oil clean
  • Easy to reach for easy and fast service

A hydraulic fluid oil reservoir is located behind the leaning pad:

  • Located in a cleaner environment
  • Easy to access for inspection and service
  • Sight glass built into the tank reduces risk of contamination when checking fluid level

Transmission bypass valves are provided on each hydrostatic pump to permit moving the QuikTrak without the engine running.

Hydro-Gear is a trademark of Hydro-Gear Limited Partnership AF Holding Company.

QuikTrak™ Mower mowing (636M shown)QuikTrak™ Mower mowing (636M shown)
Control console (636M shown)Control console (636M shown)

 Controls are color coded and logically placed to make them easy for the operator to find and use:

  • Ground speed and direction are easily controlled by moving the two hand-lever hydrostatic drive controls forward or reverse.
    • Speeds are infinitely variable up to 8.2 mph (13.2 km/h) forward and 3.5 mph (5.6 km/h) reverse.
    • A positive neutral-lock position for the levers provides added safety.
  • Two stationary reference bars are provided for operator convenience and security.
    • Front reference bar is included to control speed and reduce fatigue from control lever operation.
    • Rear reference bar is included to make reverse operation easy while maintaining operator confidence.
  • Control levers return to neutral automatically for safety and convenience.
  • Separate choke is easy to locate and use.
    • Less adjustment is needed with the separate choke.
Brake lever (engaged position)Brake lever (engaged position)
Brake barBrake bar

A tire brake is provided to give stability for parking the vehicle on hillsides and for transport; it should be engaged whenever the machine is not being used:

  • Brake must be engaged to start the machine, for added safety.
  • The tire brake bars are easily adjusted, if necessary, to maintain effective operation.
Mower deck height-of-cut adjustment
Mower deck lift handleMower deck lift handle
Mower deck height-of-cut adjustmentMower deck height-of-cut adjustment

An easy-to-use cutting height adjustment system allows the operator to adjust the mower deck cutting height with no tools and minimal effort:

  • Pull the lift lever back to the fully-raised position.
  • Remove the tethered pin and place it at the desired cutting height.
  • Lower the lift lever; the lift lever and mower will stop at the desired cutting height.

 

NOTE: Additional information on mower cutting height adjustment can be found in the mower deck section.

Operator trimming with 636M QuikTrak™ MowerOperator trimming with 636M QuikTrak™ Mower
Mower discharge deflectorMower discharge deflector

High-quality mower deflector directs cut clippings across the lawn for optimum appearance. Plastic material flexes if contacted to minimize damage.

Operator controlsOperator controls
Curb wheelsCurb wheels

Key safety features of QuikTrak Mowers include:

  • Start circuit requirements
    • Park brake engaged
    • Power take-off (PTO) disengaged
    • Control levers in neutral
    • Ignition key used to start the engine
  • A high-quality, polyethylene, mower-discharge deflector
    • Deflects if it strikes a solid obstruction, causing less damage
    • Returns to its original shape and function
  • Operator station designed to allow fast exit
  • Two large curb wheels
  • Easy to remove and replace shields
  • Stationary handles on either side of the traction controls for operator security
  • Control levers return to neutral when released
Mower deck safety certification

QuikTrak mower decks are evaluated by the manufacturer (John Deere Turf Care) and conform to American National Standards Institute (ANSI) B71.4 2004 safety certification specifications for commercial turf care equipment.

636M QuikTrak™ Mower636M QuikTrak™ Mower
Open engine compartmentOpen engine compartment

All service components are easy to access:

  • Servicing is simplified because of the open engine compartment.
  • All service and maintenance points are within easy reach.
Dual-stage air cleanerDual-stage air cleaner
Engine oil fill/check tube and oil filterEngine oil fill/check tube and oil filter

 Dual-stage air cleaner is easy to reach and easy to service:

  • Air cleaner has two filter elements.
  • Element is easy to access and easy to change.

Engine oil service points are grouped together in easy-to-reach locations:

  • Reduces the time required to check and/or change the oil and filter.
Leaning pad raised for service accessLeaning pad raised for service access
Periodic service chartPeriodic service chart

Simply raising the leaning pad exposes the hydrostatic oil reservoir, control linkage, and other service areas.

A periodic service chart is provided for convenience in keeping up on required service.

Easy-to-remove mower deck shieldEasy-to-remove mower deck shield
Hydrostatic transmission control linkageHydrostatic transmission control linkage

Remove service access shields on the mower deck, battery box, etc. to service the machine:

  • Panels are easy to remove and install.

Threaded ball and socket rod ends are used throughout the QuikTrak Mowers:

  • Provide precise control over a long period of time
  • Easily replaced when necessary
Convenient access panelConvenient access panel
Hydrostatic pump maintenance accessHydrostatic pump maintenance access

Access to check and service the hydrostatic pumps and motors is readily available at the rear of the machine.

Transmission bypass valves enable moving the vehicle without the engine running.

Battery boxBattery box
Battery cover removed for service accessBattery cover removed for service access

A secure battery box is provided to protect the battery, for reliable operation:

  • Cover is easily removed for servicing the battery.
Front tie downFront tie down
Rear tie downRear tie down

Four tie-down locations, two at the front and two at the rear, are provided for safely towing or anchoring the vehicle.

Specifications


Compare the specifications of up to 4 models

Key Specs 636m-mower
Current Model
Engine Manufacturer/modelFS600V
Engine PowerGross at 3,600 rpm: 18.5 hp
13.8 kW
Fuel tank capacity5.5 U.S. gal.
20.8 L
Mower deck Size36 in.
91.4 cm
Blade tip speed18,900 fpm
5,761 m/min
TransmissionHydrostatic
Speed range0-8.2 mph
0-13.2 km/h
Drive wheels18x8.5-10 Turf Master
Caster wheels11x4-5
Warranty24 months
Engine
Manufacturer/ModelFS600V
PowerGross at 3,600 rpm, 18.5 hp
13.8 kW
Displacement36.8 cu in.
603 cc
CylindersTwo, V-twin
Crankcase capacityWith filter, 2.2 qt
2.1 L
Oil filterFull flow, replaceable
LubricationFull pressure
CoolingForced air
Air cleaner
Dry type, dual stage
Fuel system
Fuel typeGasoline
Fuel consumption
Fuel tank capacity5.5 U.S. gal.
20.8 L
Fuel tank switch/shut-off valveYes
Electrical system
Charge systemAt 3,600 rpm, 15 amp
Battery voltage12 V
Cold cranking amp300 amp
Hour meterDigital
Operator presence starting systemYes
Drivetrain
TransmissionHydrostatic
Hydraulic pumpsHydro-Gear, 0.61 cu in.
10 cc
Wheel motorsHydro-Gear HGM-P, 12 cu in.
196 cc
Travel speedSpeed range
0-8.2 mph
0-13.2 km/h
Forward
Infinite, 0-8.2 mph
Infinite, 0-13.2 km/h
Reverse
Infinite, 0-3.5 mph
Infinite, 0-5.6 km/h
Speed and direction controlTwin hand-controlled levers
Hydraulic capacityWith filter, dry, 5 qt
4.7 L
Hydraulic oil coolerYes
FilterSpin-on replaceable
Buyer's note
Tires
Drive wheels18x8.5-10 Turf Master
Rear tires
Load rating4 PR
Brakes
Dynamic brakingDual hand-controlled levers
Park brakeTire engagement
Park brake actuationHand lever
PTO
TypeElectro-magnetic with brake, 125 lb-ft
169 Nm
DriveDual B-section V-belt with Kevlar® cord
Mower decks
Size36 in.
91.4 cm
Deck constructionFabricated steel, floating mount system
Deck thickness7 gauge
0.18 in.
4.6 mm
DischargeSide
Height-of-cut rangeIncrements
0.25 in.
0.64 cm
1.5-5 in.
3.8-12.7 cm
Cutting width36 in.
91 cm
Blades
Length18 in.
45.7 cm
Thickness0.203 in.
0.516 cm
Blade tip speed18,900 fpm
5,761 m/min
NumberTwo
Wheels
Caster wheel typeNo-flat semi-pneumatic with sealed bearings
Caster wheels11x4-5
Front anti-scalp rollers
Rear anti-scalp rollers
Dimensions
Length62 in.
157.5 cm
WidthDeflector down, 49.5 in.
125.7 cm
Height46 in.
117 cm
WeightWith full fuel and oil, 731 lb
332 kg

Accessories and Attachments

Miscellaneous

Optional mulching attachment and blades (similar design shown)Optional mulching attachment and blades (similar design shown)
#
  • This is a high-performance mulching attachment that includes formed steel baffles to control the material for superior performance.
  • The special mulching blades can also be used for side discharging, though overall cutting performance may be slightly less than with the standard blades.

The mulching attachment allows converting the mower deck so it can be used to perform the mulching function (grass or leaves).

 

These mulching attachments are used on QuikTrak™ mowers with cutting widths of 36 in. (91 cm), 48 in. (122 cm ), 52 in. (132 cm), and 61 in. (155 cm).

Operating tips when mulching:

  • Mow when grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height can't be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals - approximately every four to five days.
  • Always mow with sharp blades.

Order Zone

3.5-bu (123-L) grass catcher3.5-bu (123-L) grass catcher
Grass catcher to mower installation featuresGrass catcher to mower installation features

The 3.5-bu (123-L) grass catcher provides operators with a simple, compact solution for collecting small amounts of material. The deck-mounted hopper prevents unwanted grass clippings from being dispersed onto sidewalks, parking lots, flowerbeds, water features, and other landscaping features. By collecting this material, time spent cleaning up after mowing is reduced.

Installation

Installation and removal of the grass catcher is simple and fast. No drilling or additional bolt-on components are needed. Two large handles made from round tubing offer a variety of ways to handle the grass catcher.

Construction

A stainless-steel frame provides strength to the grass catcher. Strong, lightweight aluminum mesh sides are securely attached to the frame. The bottom of the hopper consists of a single piece of aluminum.

Easy to empty
Grass catcher rear doorGrass catcher rear door

To empty the grass catcher, simply lift the hopper from the mower deck, raise the rear door latch, and open or remove the rear door.

Compatibility
Mower series Compatible models
QuikTrak™ Stand-On Mowers

652E, 636M, 648M, 652M, 648R, and 652R

  • Model year 2016 and newer
  • Serial number 045,001 and newer
  • Not compatible with 661R and 661R EFI models
Commercial Walk-Behind Mowers

W36M, W48M, W36R, W48R, and W52R

  • Model year 2019 and newer
  • Serial number 010,001 and newer
  • Not compatible with W61R

 

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

3.5-bu (123-L) grass catcher

Order number: LP68164

Spark Arrester

Spark arrester screenSpark arrester screen

Available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.

Includes instructions, spark arrester screen and mounting hardware.

Reviews

4.5

2 reviews

Rating Snapshot

1
1
0
0
0
5
4.5
5

Best John Deere for hill sides

5/5

I sold my commercial zero turn - which was great for a large yard - for this quiktrak 36 inch mover and have no regrets. I broke my leg a few years back and was concerned that standing would be an issue - it’s easier on me than sitting, the spring absorbs any bumps - just remember to keep knees slightly bent. The zero turn would rise off the front wheels when I cut the back-yard due to the hill, this climbs it like a tank - just hold on to it. The center of gravity helps it to climb a steeper hill. I had to drive over 250 miles to find a dealer would carried this model - test drove it - and loaded it up in the back of my pickup truck. 36" fits great through my gates. I don't use this commercially - I just value my time. For my yard <1 acre - with a fenced in area - and a sloped back yard - this is perfect. Faster than the zero, and a lot quicker cutting than pushing.

Pros

Cons

JohnB

From: Alpine, Al

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Intermediate

5
2
5

Highly recommend

4/5

I'm an intown and rural landscape contractor and I love this machine. Small foot print on the trailer for transport. Very nimble with plenty of power.

Pros

Cons

Austingardens

From: Denton County, TX, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5