We are hiring! Run with Riesterer and Schnell: Apply Today
We are hiring! Run with Riesterer and Schnell: Apply Today
Search
Choose a Location
Compare the specifications of up to 4 models
Key Specs | 2038r Current Model |
---|---|
Engine power (gross) | SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
Power take-off (PTO) power | 22.7 kW 30.4 hp |
Steering hydraulics | 15 L/min 4 gpm |
Implement hydraulics | 20.2 L/min 5.3 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Standard |
Approximate shipping weight (open-station; cab) | Open station: 1320 kg 2910 lb Cab: Not applicable |
Wheelbase | 1723 mm 67.8 in. |
Engine | |
Family | |
Manufacturer | Yanmaru00ae |
Engine model | 3TNV88C-NJT |
Engine power (gross) | SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
Power take-off (PTO) power | 22.7 kW 30.4 hp |
Rated engine speed | 2500 rpm |
Type | Direct Injection |
Injection pump type | Direct Injection |
Aspiration | Turbocharged |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | Three cylinders: 1.568 L 95.8 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 86x90 mm 3.39x3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 104.7 Nm 77.2 lb-ft |
Fuel tank capacity | 32 L 8.5 U.S. gal. |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 85 amp |
Starter size | 1.4 kW 1.9 hp |
Fuel system | |
Type | Direct Injection |
Fuel consumption | |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Optional transmission; forward/reverse | |
Left-hand reverser | |
Transmission gear ranges | |
Final drive | Spur gear |
Brakes | Wet disc |
Steering | Power steering |
Clutch, wet/dry | |
Clutch disk diameter wet clutch | |
Axle capacity | Front 880 kg 1940 lb Rear 1800 kg 3968 lb |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
Pump type | Dual gear |
Maximum operating pressure | 172 bar 2495 psi |
Draft control sensing | Position control |
Remote control valves available | Up to three |
3-point hitch | |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Power take-off (PTO) | |
Standard | Rear: 543 rpm Mid: 1998 rpm |
Optional | |
Control | Independent |
Clutch | Wet disc |
Brake (for mid and rear PTO) | Wet disc |
Engagement method | |
Fluid capacities | |
Crankcase with filter | 4.5 L 4.8 qt |
Transmission and hydraulic system | |
Final drive | |
Type | Spur Gear |
Differential lock | Yes |
Operator station | |
Rollover protective structure | Type Foldable ASABE S478 |
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | |
Cab | |
Compliance | |
Visibility | |
Air conditioning, temperature differential | |
Doors | |
Noise rating | |
Seat equipment | |
Dimensions | |
Height | |
Wheelbase | 1723 mm 67.8 in. |
Front axle clearance | |
Turning radius with brakes | 2.46 m 8.07 ft |
Turning radius without brakes | |
Limited slip differential | |
Approximate shipping weight (open-station; cab) | Open station: 1320 kg 2910 lb Cab: Not applicable |
Tires | |
Front | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
Rear | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
Front tread range | |
Rear tread spacing | |
Miscellaneous | |
Toolbox | Yes |
Tilt steering wheel | Yes |
12-V Outlet | Yes |