×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

9RX 710 SCRAPER SPECIAL TRACTOR

Scraper Special

  • Engine HP: 781 hp Max1 / 710 hp Rated2
  • JD18 engine (18L)
  • e21™ PowerShift transmission
  • Fully integrated precision ag technology



View Product Brochure



Features



9R Scraper Tractor 9R Scraper Tractor
Overview

AutoLoad is exclusive to John Deere and is a major innovation in the earthmoving industry. It increases operator efficiency by allowing novice and experienced operators to be more consistent and productive while operating John Deere tractors and scrapers. With the touch of a button, operators maximize productivity and efficiency even if they have never operated tractors and scrapers.

Benefits
  • Reduced labor cost
  • Reduced training time to bring operators up to full productivity
  • More consistent yards per cycle, per hour, per day
  • Ease of operation, reduced operator fatigue
  • More consistent cut profiles for a new or inexperienced operator
  • More consistent fill profiles utilizing AutoLoad set point features
  • Reduced requirements for support equipment such as compactors, graders, dozers
  • Consistent productivity, regardless of operator experience, for the entire work day, and the entire work week

For more information on AutoLoad, reference AutoLoad in Precision Technology.

EPS in-cab display EPS in-cab display
Overview

The Earthmoving Productivity System can determine the amount of volume being loaded into a scraper in real time and transfer that critical data back to personnel. Operators have more precise volume loads and decrease counting errors. This allows them to finish jobs faster, saving time and money. It features proven components that are utilized by other John Deere equipment. A 3D stereo camera mounted on the existing laser rack captures images of material getting loaded into the scraper. These images are sent through an image processing module (IPM) that determines the volume inside the scraper.

Benefits
  • Measure yardage in real time to ensure a full scraper after every cut
  • Benchmark operators for best asset utilization
  • Transfer data directly to jobsite supervision using JDLink™ system
  • Visualize what is being loaded into the scraper
  • Calculate cost per cubic yardage in real time per load for each scraper system

For more information on EPS, reference Earthmoving Productivity System (EPS) in Precision Technology.

Ultimate Visibility package at night Ultimate Visibility package at night

Visibility is more than just lighting. It’s mirrors where you need them, shades for the blinding late-fall and early-spring sun, wipers to help keep all the glass clear, and integrated camera capability. The 9 Series Tractors let you choose the visibility package that best suits your needs Select, Premium, or Ultimate with 360-degree light-emitting diode (LED) lighting so you and your operators can run with all-conditions confidence.

 

  Select Premium Ultimate
Lighting 18 halogen worklights 18 LED worklights 24 LED worklights and eight LED convenience lights*
Mirrors Mechanical Electric and heated Electric, heated, and telescoping
Sunshades Front Front, right-hand side, and rear Front, right-hand side, and rear
Wipers Front and rear Front, right-hand side, and rear Front, right-hand side, and rear
Cameras Camera ready Camera ready Integrated digital cameras
Rear window tint À la carte option À la carte option À la carte option

*Convenience lights illuminate the corners of the cab for easier entry and exit.

Rear window tint Rear window tint

Specifications


Key Specs 9rx-710-scraper-special-tractor
Current Model
Engine descriptionJD18 (John Deere 18L)
Engine displacement18 L
1098 cu in.
Rated engine power
Maximum engine power
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628)522 kW
710 hp
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628)574 kW
781 hp
Rated PTO power (hp SAE)
Maximum PTO power
Transmission typeJohn Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager: 40 km/h
25 mph
Hydraulic pump rated outputTriple: 636 L/min
168 gpm
Rear hitch category (SAE designation)
Base machine weight33,500 kg
74,000 lb
Engine specifications
DescriptionJD18 (John Deere 18L)
Engine typeIn-line six, six-cylinder
Engine family
Rated speed1900 rpm
AspirationDual turbochargers in series; Primary fixed displacement turbocharger and secondary wastegated turbocharger, air-to-air aftercooling, and cooled exhaust gas recirculation (EGR)
Cylinders linersWet-sleeve
Emission levelFinal Tier 4 (FT4) / Stage V Compliant Diesel Engine
After treatment typeExhaust Gas Recirculation (EGR) - No Diesel Exhaust Fluid (DEF) used
Displacement18 L
1098 cu in.
Engine performance
Rated power
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628)522 kW
710 hp
Rated PTO power (hp SAE)
Maximum PTO power
Intelligent Power Management (IPM)
Power boost10 percent
Maximum engine power
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628)574 kW
781 hp
Engine peak torqueAt 1400 rpm: 3622 Nm
2671 lb-ft
Drawbar power
PTO torque rise38 percent at 1400 rpm
Fuel injection system and control
Air cleaner type
Transmission
TypeJohn Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager: 40 km/h
25 mph
Integrated Electric Power Generation
Reverser
Clutch; wet/dry
Creeper
Hydraulic system
TypeAxial piston, closed-center, pressure-and-flow compensated, naturally-aspirated
Pump rated outputTriple: 636 L/min
168 gpm
Available flow at a single rear SCV1.9-cm (3/4-in.) couplers: 180 L/min
44 gpm
Available flow at front SCVs
Number of rear selective control valves (SCVs)Six 1.9-cm (3/4-in.) couplers
Number of mid selective control valves (SCVs)
Number of front selective control valves (SCVs)
Joystick SCV control
Auxiliary hydraulic features
SCV controlElectronic
Rear hitch
Hitch draft control load sense type
Remote control valves available
Hitch category (SAE designation)
Maximum lift capacity behind lift points
Lift capacity at standard frame
Sensing type
Rear axle differential lock
Drawbar
Drawbar categoryDrawbar support for short scraper drawbars
Maximum vertical load
Rear power take-off (PTO)
Type
Engine rpm (at rated PTO speeds)
Economy PTO speeds
Reverse PTO speeds
Multispeed PTO option availability
Ground speed PTO option availability
PTO actuation
Front hitch
Category
Electric power
Standard lift capacity
Front power take-off (PTO)
PTO speed
Rear axle
Type
Final drive typeOutboard planetary with three planetary gears
Differential controls
Axle type
Brakes, type and control
Rear differential lockFull-locking electrohydraulic
Load rating
Front axle
Type
Front axle differential lockFull-locking electrohydraulic
Load rating
Tires
Front
Rear
Wheel tread range
Turning radius with brakesTurning radius calculated off rear axle centerline
679.5 cm
22.3 ft
Turning radius without brakes
Central Tire Inflation System (CTIS)
Tracks
Tread spacing
Drive typeCamso® Scraper 6500 Tracks
Track width762 mm
30 in.
Mid-rollersThree
Steering
Brakes
Primary brake (foot brake)
Secondary brake
Park lock
MFWD braking
Front axle brakes
Auxiliary brakes
Hydraulic trailer brakes
Pneumatic trailer brakes
Electrical system
Alternator size330 amp
Battery options12 V
Working lightsVaries by visibility package
Type of bulb in headlight (Halogen, Zenon, LED)Select Visibility: Halogen: 65 W
Premium and Ultimate Visibility: LED
Type of bulb in beacon (Halogen, Zenon, LED)
dB(A) rating for backup alarm
Total cold cranking amps5 x 925 CCA
Total: 4625 CCA
Operator station
Rollover protective structure, OOS
SeatDegree of seat swivel, left hand
Select Comfort and Convenience: 8 degree
Premium and Ultimate Comfort and Convenience: 25 degree
Degree of seat swivel, right hand
Select/Premium/Ultimate Comfort ahd Convenience: 40 degrees
Air suspension
Cab suspensionStandard
Instructional seatStandard
DisplayStandard: G5Plus CommandCenter™: 32.5 cm
12.8 in.
RadioVaries by comfort and convenience package
Inner cab volume3.37 m3
119 cu ft
dB(A) rating
Cab glass area6.86 m2
73.81 sq ft
Safety glass rating
Front visibility
Dimensions
WheelbaseDistance from the center of the front drive sprocket to the center of the rear drive sprocket: 4620 mm
15.2 ft
Overall width
Overall length8371 mm
27.5 ft
Overall height
Drawbar clearance359 mm
14.1 in.
Front axle center
Approximate shipping weight, Open;Cab223.5-cm (88-in.) tread spacing with 76.2-cm (30-in.) tracks: 33,500 kg
74,000 lb
Weight
Base machine weight223.5-cm (88-in.) tread spacing with 76.2-cm (30-in.) tracks: 33,500 kg
74,000 lb
Maximum ballast level34,500 kg
76,000 lb
Maximum permissible weight
Capacities
Crankcase oil volume71.5 L
18.9 U.S. gal.
Fuel tank1952 L
515 U.S. gal.
Diesel exhaust fluid (DEF) tank
Cooling system117 L
30.9 U.S. gal.
Transmission-hydraulic systemDrivetrain (Transmission and axles) 223.5-cm (88-in.) spacing: 201 L
53 U.S. gal.
Serviceability
Interval for engine oil change500 hours
Interval for hydraulic/transmission oil changeHydraulic system: 4000 hours (Filters at 2000 hours)
Transmission oil and filters: 2000 hours
Interval for engine coolant change6000 hours or 6 years
Loaders
Loader
Lift capacity at full height
Maximum lift height
Leveling type
Precision AG
GuidanceIntegrated AutoTrac™
TelematicAvailable with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnosticsAvailable with activated JDLink hardware and activations
Miscellaneous
AutoTrac ready
ISOBUS ready
CommandCenter video inputs
Immobilizer
Side slope rating
Uphill/downhill slope rating
Country of manufactureUSA