×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

S240 LAWN TRACTOR 48 IN

Lawn Tractor with 48-in. Deck

  • Two side-by-side forward and reverse pedals
  • Wide, welcoming operator station
  • Cool and comfortable 15-in. (38 cm) open, high-back seat
  • Powerful V-Twin Engine
  • 48-in. (122 cm) Accel Deep™ Mower Deck with MulchControl™ Kit option



View Product Brochure



Features



18.5-hp (13.8-kW) engine18.5-hp (13.8-kW) engine
Engine oil and fuel filtersEngine oil and fuel filters

The S240 Tractor comes with a premium engine, the same as used in some Select Series™ X300 models:

  • Large cleanout ports, integrated into the engine shroud, are located over the cylinder heads to allow for easy inspection and removal of any debris that may have collected there.
  • Premium engine oil and air filtering systems and cooling design provide increased reliability and engine life.

The 18.5-hp (13.8-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

  • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
  • Electronic ignition for fast starts
  • Cast-iron cylinder liners for longer engine life
  • Overhead valves for excellent power and fuel economy
  • Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
    • Also more effective when operating the tractor on an incline
  • In-line fuel filter for reliable operation
Engine speed lever and spring-loaded choke leverEngine speed lever and spring-loaded choke lever
Engine hood in open positionEngine hood in open position

The engine speed lever and choke control lever are separate controls:

  • The engine speed lever is easy to use - there is no need to worry about pushing too far and engaging the choke as on single throttle/choke lever systems.
  • The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

 Engine hood opens wide for easy access to service points:

  • It is easy to inspect and clean the engine area.
  • Important service points are exposed.
  • Cleanout ports designed into the engine shroud make cleaning the engine cooling fins easy.
  • The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
Fuel tank has gauge to show fuel level from the operator's seat
Fuel tank gaugeFuel tank gauge
Convenient fuel-filler openingConvenient fuel-filler opening

The fuel tank gauge shows how much fuel is in the tank, and can be seen without leaving the operator's seat:

  • Easy to check the fuel level
  • Convenient location

Fuel tank:

  • Capacity is 2.4 U.S. gal. (9.08 L).
  • Fuel-filler opening is conveniently located under the seat. 
    • Filling the tank without spilling is easy.
    • The tethered fuel tank cap is more convenient.
    • The sealed fuel cap helps keep vapors inside the tank.
    • The tractor has a California Air Resources Board (CARB) certified engine for reduced air pollution.
S240 with Accel Deep MowerS240 with Accel Deep Mower
Left front corner of mower deckLeft front corner of mower deck

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:

  • 4.83-in. (12.3-cm) depth throughout the entire deck shell allows for optimum mowing, mulching, and bagging performance.
    • Optional MulchControl™ attachment provides superior mulching performance and versatility.
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance.
  • Mower deck is suspended from the vehicle for a smooth and level cut.
    • Adjustable mower wheels, positioned just above ground level, help reduce scalping.
Excellent cut quality
Top view of mower deckTop view of mower deck
Underside of mower deckUnderside of mower deck

NOTE: Optional front center rollers shown in above mower deck photos.

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of the discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.
Productivity - getting the job done fast
Left side of Accel Deep mower deckLeft side of Accel Deep mower deck
Right side of Accel Deep mower deckRight side of Accel Deep mower deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:

  • Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
MulchControl option

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings
Cleanliness - for the mower and the operator
Right front view of mower deckRight front view of mower deck
Left front view of mower deckLeft front view of mower deck

The flat-top shape of the deck stamping is optimal for keeping the deck and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without build-up of material to interfere with the flow of air and clippings
    • Less need to clean and remove build-up of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck.
    • Limited amount of material drifts onto the operator and mower deck
    • Even for material discharged out of the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely, and the MulchControl attachment makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash portMower wash port
Mower wash port with hose connectorMower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

  • A hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-up coverSpindle pocket with flip-up cover
Easy-to-adjust mower wheel and mower side reinforcementEasy-to-adjust mower wheel and mower side reinforcement

The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

  • Ribs in the deck shell add strength where it is needed.

Mower wheels are heavy duty:

  • Provides greater strength and durability for longer, trouble-free life.
  • Setting wheels to the correct height for the cutting height is quick and easy.

Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.

The mower deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes

The 48-in. (122-cm) Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

  • With the optional MulchControl attachment installed (along with the special mulching blades), changing from side-discharge to mulching or vice versa is done with the simple flip of a lever.
  • The Power Flow rear bagger can be used with the MulchControl attachment and blades installed - by simply placing the MulchControl lever in the side-discharge position.
Front roller option

Optional front rollers are available for the 48A Mower Deck to reduce the chance of scalping when mowing over berms and other uneven areas. Parts required are:

  • Two M113955 rollers
  • One M158262 screw
  • One M142955 locknut
How MulchControl works
MulchControl baffle openMulchControl baffle open
MulchControl baffle closedMulchControl baffle closed

NOTE: Optional front center rollers shown in above mower deck photos.

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl baffle closedMulchControl baffle closed
MulchControl handleMulchControl handle
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
    • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharge or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when grass gets too long
  • For operators who usually side-discharge, but would like to be able to close the chute to control clippings
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
6.5-bu (229-L) Power Flow™ rear bagger option
Optional rear baggerOptional rear bagger
Power Flow blowerPower Flow blower

An optional 6.5-bu (229-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:

  • The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
  • The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
    • 6.5-bu (229-L) capacity
    • Easy-to-attach Power Flow blower
    • Easy-to-attach chute

An exclusive 3-year or 200-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere S200 Series Tractors.

  • The warranty is hassle free, with one company handling all of the paperwork.
  • Premium features of S200 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Two-pedal foot control and cruise leverTwo-pedal foot control and cruise lever
Hydro/automatic foot control in useHydro/automatic foot control in use

A Kanzaki® Tuff Torq® hydro/automatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.

Side-by-side foot pedals control the speed and direction of travel:

  • The automotive-type accelerator controls ensure easy operation.
  • The operator can change direction without lifting foot off the platform.
  • A large pedal surface gives superior operator comfort.
Hydro/automatic-transmissionHydro/automatic-transmission

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements to ensure excellent performance and reliability:

  • The S240 Tractor has a Tuff Torq K46DP transaxle with an internal wet-disk brake for reliability and long life:
    • Rated for 30 percent more torque than the transaxle used in many lawn tractors
    • Uses Hy-Gard™ fluid like Select Series™ X300 Tractors
Standard cruise control
Cruise control leverCruise control lever

Easy-to-use cruise control option maintains the tractor's speed for mowing larger areas.

  • To engage, lift up on the cruise lever and hold it until foot is removed from the forward pedal.
  • To disengage, lightly press and then release the forward pedal.
  • For emergency stops, cruise can be released by pushing on the brake pedal or pushing down on the cruise control lever.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.

Snow blower, weather enclosure, weights, and chains on a 100 Series TractorSnow blower, weather enclosure, weights, and chains on a 100 Series Tractor
Front blade, weather enclosure, and chains on a 100 Series TractorFront blade, weather enclosure, and chains on a 100 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 46-in. (117-cm) Front Blade
  • Tire chains or TerraGrip traction belts
  • Weather enclosure
  • Weights

 

S240 TractorS240 Tractor
Solid, one-piece frame and cast-iron front axleSolid, one-piece frame and cast-iron front axle

Enhanced styling for the S240 Tractor includes a unique hood top:

  • Close-out panels at the lower back of the hood are included for better looks and reduced engine sound level.
  • Top louvers improve engine cooling.

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:

  • Full-length robotically welded frame design has high-strength steel rails for added strength and long life.
  • One-piece fender deck is bolted to the frame.
  • Two-bar front bumper is included as standard equipment to add style and protection.
S240 TractorS240 Tractor
Turf Trac tire treadTurf Trac tire tread

The S240 comes with premium Turf Trac tires for superior traction and appearance:

  • A more rounded profile reduces lawn scuffing and steering effort.
Cast-iron front axle will not bend
Front axle and wheel spindleFront axle and wheel spindle

The front axle is constructed of solid cast iron that will not bend:

  • Automotive-like steering system with sector-and-pinion steering gears and single drag link and tie rod provides a very strong, low-effort, and tight-turning system.
  • Grease fittings allow regular lubrication to help maintain easy steering and minimize wear.
  • Large, 0.75-in. (19-mm) diameter wheel spindles provide excellent durability.
    • Front wheels turn on ball bearings for increased reliability and life over other lawn tractors that have bushing for the front wheels.
CargO Mount™ system makes installation of rear bagger and other attachments easy
Rear CargO Mount pointsRear CargO Mount points
Front CargO Mount pointsFront CargO Mount points
Rear bagger is mounted with the rear CargO Mount pointsRear bagger is mounted with the rear CargO Mount points

The CargO Mount system is a combination of front and rear mounting points that provide convenient and easy installation of the rear bagger and other attachments.

Large, comfortable footrests
S240 with Accel Deep MowerS240 with Accel Deep Mower
Comfortable operator station, left sideComfortable operator station, left side

Wide footrest areas with non-slip, anti-vibration rubber footpads are provided for operator comfort and safety:

  • Channels in the footrest design steer debris off to the side to keep the foot platform cleaner.
  • Wider footrest makes it easier to step over the mower deck while entering or exiting the seat.
Comfortable seat
Open-back seatOpen-back seat
Easy-to-adjust seatEasy-to-adjust seat

The operator seat can be easily adjusted forward or rearward while in the seat, with seat travel of 5.5 in. (140 mm) and 10 different positions:

  • The open-back seat design keeps the operators back cooler.
  • The green plastic seat adjustment lever is easy to locate and use.
  • Slide pads on the bottom of the seat allow the seat to slide more easily for convenient adjustment.
Rubber isolators under the seat give a smoother rideRubber isolators under the seat give a smoother ride

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank:

  • Rubber isolators under the seat smooth out the ride for greater operator comfort.
Convenient storage and service-interval decal
Storage compartment with coverStorage compartment with cover
Convenient service-interval decalConvenient service-interval decal

The beverage holder and storage compartment, located on the right fender, add value and operator convenience.

A decal located inside the hood gives quick access to basic service information.

Controls and instruments
Conveniently located controlsConveniently located controls

Three-spoke steering wheel for greater operator comfort and control:

  • Large, 14-in. (35.6-cm) diameter steering wheel gives greater comfort and control compared to smaller diameter steering wheels used on many lawn tractors.

The contoured dash has clean, attractive styling:

  • Controls are color coded and labeled for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
  • The ignition switch is on the dash for starting ease.
  • Functional design of the controls provides good appearance and a comfortable feel.
Engine speed lever and spring-loaded choke leverEngine speed lever and spring-loaded choke lever
Power take-off (PTO) switchPower take-off (PTO) switch

 The engine speed lever and choke control lever are separate controls:

  • The engine speed lever is easy to use - there is no need to worry about pushing too far and engaging the choke as on single throttle/choke lever systems.
  • The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.

Mower drive is actuated with an easy-to-use electric PTO switch:

  • The electric switch requires only a short movement compared to long throw required with manual PTO engagement lever.
  • With an electric PTO clutch, the mower drive belt stays under tension at all times for improved reliability compared to manual PTO engagement systems.
Reverse implement option (RIO)
RIO switchRIO switch
Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

  • Carefully check the area around the machine.
  • Disengage the mower before backing up.

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

  1. Stop forward travel.
  2. Look behind the machine to be sure there are no bystanders.
  3. Push and hold in the RIO switch while depressing the reverse pedal slightly.

NOTE: If the mower or other attachment stops while repositioning the machine, return the attachment engagement switch to the off position. Start engine and engage mower. Begin again with step 2. 

  1. Release the RIO switch and reposition the machine as the machine begins to move rearward.
  2. Resume forward travel. The mower or other attachment should continue operating.
  3. Repeat procedure to position the machine again.
Cruise control
Cruise control leverCruise control lever
Cruise control lever and two-pedal foot controlCruise control lever and two-pedal foot control

Cruise control is standard equipment:

  • To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
  • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Parking brake control
Parking brake controlParking brake control
Brake pedal and parking brake controlBrake pedal and parking brake control

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Mower deck height adjustment and handgrip
Mower deck height adjustment leverMower deck height adjustment lever
Fender flare with handgripFender flare with handgrip

The spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:

  • Increments of 0.25 in. (0.64 cm) allow for fine-tuning the cut height.

Full-size fender flares include handgrips and reflectors for added safety.

One-piece hood is easy to openOne-piece hood is easy to open
Service interval decal located under hoodService interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
    • The high-quality engine used in the S240 does not require an 8-hour oil and filter change because improvements in the manufacturing process and quality of parts, components, and oils have eliminated the need for the short interval oil change requirement.
Easy-to-service engine fuel and oil filtersEasy-to-service engine fuel and oil filters
Easy access to fuel-fill openingEasy access to fuel-fill opening

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

The seat tilts up and out of the way to make adding fuel easy.

The S240 Tractor is covered by a 3-year/200-hour bumper-to-bumper warranty*:

  • Premium features of the S240 allow for this longer warranty period, with more coverage than other tractors of comparable size.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Hood will not dent or rust and includes quality headlights for good visibility
One-piece hood opens for service accessOne-piece hood opens for service access
Quality headlights for good visibilityQuality headlights for good visibility

The hood is made of molded-in color material:

  • Reduces sound
  • Will not rust or dent
  • Openings on the side of the hood let in plenty of cooling air while keeping the sound level low.
  • Two headlights provide good lighting for nighttime operation.
MowerPlus app screenMowerPlus app screen
MowerPlus app maintenance screenMowerPlus app maintenance screen

Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.

Look for the MowerPlus app on the iOS® or Android™ system app stores.

The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.

NOTE: Some product image variation may exist.

 

MowerPlus hour meter connector also available (sold separately)
MowerPlus hour meter connector packagingMowerPlus hour meter connector packaging

The John Deere MowerPlus hour meter connector wirelessly links a 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device. The hour meter connector transmits engine usage to the app, making it easy to track maintenance intervals:

  • iOS version 10 or higher is compatible with the hour meter connector.
  • Android versions are not compatible with the hour meter connector at this time.

iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.

Specifications


Compare the specifications of up to 4 models

Key Specs s240-lawn-tractor-48-in
Current Model
Engine power18.5 hp
13.8 kW
Engine manufacturer/modelFS600V
Transaxle typeK46 hydrostatic integrated with transaxle
Transaxle controlTwo-pedal foot-controlled hydrostatic
Rear tires20x10-8
Steering typeSector and pinion with single drag link and tie rod
Lift system typeLever on fender deck
Cutting widthAccel Deep™ mower deck, 48 in.
122 cm
U.S. warranty3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power18.5 hp
13.8 kW
Displacement36.8 cu in.
603 cc
Manufacturer/modelFS600V
TypeOverhead valve, full-pressure lube, oil filter
CylindersV-twin, cast-iron liners
GovernorMechanical
Choke/speed controlSeparate levers, automatic choke return
Cooling methodAir
Air cleanerDry, replaceable with foam precleaner
Oil drainNo tools
Fuel system
TypeGasoline
Fuel deliveryPulse pump and carburetor
Fuel gaugeMechanical, viewable from seat
Fuel tank locationRear
Fuel fill openingCenter, 1.75 in.
4.45 cm
Fuel tank capacity2.4 U.S. gal.
9.1 L
Electrical system
Battery12 V
300 CCA
Charging systemFlywheel alternator, regulated, 15 amp
Engine starterBendix type
HourmeterYes, with service reminder
HeadlightsTwo standard, incandescent
Taillights or reflectorReflectors
Backup lightsNo
Rear work lightsNo
12-V outletOptional
Transaxle
TypeK46 hydrostatic integrated with transaxle
ControlTwo-pedal foot-controlled hydrostatic
Cruise controlStandard
Oil coolerFins and fan on transaxle
Oil filterYes, internal, not replaceable
Differential lockNo
Forward speed0-5.5 mph
0-8.9 km/h
Reverse speed0-3.2 mph
0-5.1 km/h
BrakesInternal wet disk
Chassis
FrameFull-length welded steel
Primer/paintE-coat/powder
Weight bracketOptional rear
Receiver hitchNo
Front axleCast iron front axle, front wheel ball bearings
Spindle bushingsNo
Front tires15x6-6
Rear tires20x10-8
Hood materialMolded-in color material reduces sound, will not rust or dent
Fender deck materialStamped steel
Floor matsYes, with debris removing channels
StorageStorage tray with cover
Service interval decalYes
Fender handles/gripsHandgrips
Cup holderYes
Equipment mountingCargO Mount™ system
Steering
TypeSector and pinion with single drag link and tie rod
Four-wheel steerNot available on this model
Steering wheelDeluxe, diameter - 14 in.
35.6 cm
Tilt steering wheelNo
Turning radius18 in.
45.7 cm
Uncut circle radius
Seat
TypeOpen-back design with grasp
Seat back height15 in.
38.1 cm
ArmrestsNo
Fore-aft adjustmentWhile seated, 5.5 in.
14 cm
Seat suspensionTilt, two rubber isolators
Lift system
TypeLever on fender deck
Hydraulic outletsNo
Mower cut height13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments0.25 in.
0.64 cm
Preset cut heightNo
Mower deck
TypeSide discharge
Cutting widthAccel Deep™ mower deck, 48 in.
122 cm
ConstructionStamped steel deck shell
Mower deck materialSteel, 10 gauge
0.135 in.
3.4 mm
Mower wash portYes
Mower drive systemElectric power take-off (PTO) clutch
Mower wheelsFour
Mower wheel adjustmentOne bolt
Mower level adjustmentEasy-level deck
Mower attachability
TypeSlide under tractor
Front draft armsOne spring clip
Rear draft armsTwo spring clips
Mower wheels rotateNo
Drive systemSingle belt
Safety
Meets ANSI standardYes
Meets OPEI standardYes
Backup protectionReverse Implement Option (RIO)
Safety videoYes
Buyer's notes
NotesMolded-in color material reduces sound, will not rust or dent
Durable primer and powder paint finish
Large, 14-in. (36-cm) steering wheel for more comfortable operation
Warranty3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers48A (standard)
Rear bagger2-bag, 6.5 bu
229 L
Powered material collectionPower Flow™ blower
Mulching systemYes, MulchControl™
Front thatcher
Front blade46 in.
116.8 cm
Mid-mount blade
Snow blowerTwo-stage, 44 in.
111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
SprayerTow-behind only, 15 U.S. gal.
56.8 L
Tow-behind only, 25 U.S. gal.
94.6 L
SpreaderTow-behind only, 125 lb
57.7 kg
Tow-behind only, 175 lb
79.4 kg
Front bumperStandard two-bar styled front bumper
Brush guard
Weather protectionSnow cab
Sun canopy
Rear receiver hitch
Bucket holderYes, single bucket
Grass stripingLawn striping kit
Tractor shovel
Front loader
Other equipment
Tow-behind tools16
Dimensions
Height44.6 in.
113.2 cm
Overall length75.1 in.
191 cm
Wheelbase48.9 in.
124.2 cm
Width with mower62.5 in.
159 cm
Width with mower (deflector raised for storage)53.6 in.
136 cm
Width without mower
Weight458 lb
208 kg

Accessories and Attachments

Carts

7P Poly Utility Cart7P Poly Utility Cart
#

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Poly Utility Cart7P Poly Utility Cart
  • The cart has a premium molded, high-density polyethylene box construction.
  • Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
  • Polyethylene body will not rust or dent; it stays looking new longer.
  • 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
  • Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
  • Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.
Wheels
7P Utility Cart wheel7P Utility Cart wheel
#

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

  • Good flotation
  • Minimal rolling resistance
  • Shock absorption
Sloped tailgate
Sloped tailgate for easy emptyingSloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch
Spring-pin tractor hitchSpring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place
Tilt latch
Tilt latchTilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Poly Utility Cart, push mode8Y Convertible Poly Utility Cart, push mode
8Y Convertible Poly Utility Cart, tow-behind mode 8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

  • Compatible with riding lawn tractors and garden tractors
  • Durable poly construction
  • All-terrain pneumatic tires
  • Converts from tow cart to push cart without tools
  • Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
 
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck. 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

10P Poly Utility Cart10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.


Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

  • Large 650-lb (295-kg) capacity
  • 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
  • Will not dent or rust
  • 15x6 tubeless pneumatic tires with turf tread for maximum traction
  • Easy, hands-free foot pedal dump release
  • Steep dump angle for complete emptying

 

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart 13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Welded boxWelded box

Welded box construction provides maximum reliability:

  • Requires less setup time than the bolted construction.
  • Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.
Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

  • Good flotation
  • Minimal rolling resistance
  • Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgateDeluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch
Spring-pin tractor hitchSpring-pin tractor hitch
Tilt-dump latchTilt-dump latch

A large-diameter hitch pin provides plenty of strength:

  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

  • Steep dump angle makes emptying easier.
Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

 

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel Cart16YS Swivel Cart

The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

 

Key features include:

  • Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
  • 800-lb (363-kg) capacity makes it durable enough for the heavy jobs
    • 350 lb (158 kg) when using swivel feature to dump
  • Convenient foot pedal release for easy dumping
  • Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.

 

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

16YS Swivel Cart

Order number: LP68186



Oilite is a trademark of Beemer Precision Incorporated.

17P Utility Cart17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.


Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

Key features of the 17P Utility Cart:

  • 1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.
  • Cart has premium molded polypropylene box construction.
  • Polypropylene body will not rust or dent, staying new-looking longer.
  • 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
  • Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
  • Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
  • Wheels are mounted on a solid one-piece axle.
  • Wheels turn on iron/Oilite® bushings with grease fitting for long life.
  • Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

Complete Mcs

6.5-bu (229-L) hopper6.5-bu (229-L) hopper
Power Flow blowerPower Flow blower

The BUC10126 6.5-bu (229-L) Power Flow grass collection system includes the hopper, chute, and blower. Mower blades are not included, as the bagger works well with either the standard side-discharge blades or mulching blades and the MulchControl™ system. It expands versatility of an S240 Tractor equipped with a 48-in. (122-cm) Accel Deep™ Mower Deck.

NOTE: Front ballast for the tractor is recommended, especially when operating on hills or inclines.

The blower, chute, and fan are molded from high impact polymer:

  • Power Flow is lightweight for easy handling and minimal effect on mowing smoothness.
  • It will not rust or corrode.
  • Fan and housing resist wear and abrasion caused by sand.
  • Contoured design gives a clean appearance and smooth grass flow.
  • Fan is driven with V-belt from a sheave added to the top right mower spindle.

The chute includes a convenient handle and a fill indicator that tells the operator when the bags are full.

Specifications
Capacity 6.5 bu (229 L)
Material: 
   Hopper top High impact polypropylene
   Chute Polyethylene
   Blower housing Nylon
   Fan UHMW* polyethylene
   Bags Polyester
Filling Directly into bags for emptying on ground or in trailer or into plastic liners
Fan diameter 13 in. (334 mm)
Fan width 2.75 in. (70 mm)
Number of fan blades  4

*Ultra-high molecular weight.

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)
MCS 6MCS 6
#

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

  • Lightweight aluminum construction
  • Designed for full material expulsion
  • Easy access self-latching spring tripped handle
  • Ships almost fully assembled (5 minute handle assembly)
  • Installs in seconds (after initial assembly)

Benefits:

  • Easy - Convenient Access to dump handle directly from seat 
  • Clean - No material handling, no mess 
  • Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere 100 Series and S240 Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

MCS 6 attachment
Order number: LP47167

Drawbar

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Front Blade

46-in. (117-cm) Front Blade46-in. (117-cm) Front Blade
46-in. (117-cm) Front Blade used on loose material46-in. (117-cm) Front Blade used on loose material

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

  • Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
  • Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

  • Blade can be angled left, right, or used in the straight-ahead position.
Full working range
Full working rangeFull working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat
Operator blade controlOperator blade control

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

  • Blade can be angled left, right, or used in the straight-ahead position.
  • For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.
Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

  • 102, 115, 125, 135, 145, 155C, and 190C Tractors
  • L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
  • LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
  • LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
  • D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
  • S240 Tractor

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer D100 Series and S240 Tractors:

  • The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older D100 Series Tractors and the S240 Tractor.
  • The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors (SN 700,001-).
    • A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.
Attachment D100 Series and S240 Tractors
Model yearDescriptionOrder code/attachment number2015 and prior2016 and newer
2015 and prior46-in. (117-cm) Front BladeBG20020X 
2016 and newer46-in. (117-cm) Front BladeBG20943XX

Requirements and/or recommendations:

  • Rear weights and tire chains are required for additional traction.

Specifications

Overall width 46 in. (117 cm)
Overall height 14 in. (36 cm)
Clearing width 46 in. (117 cm)
Angling positions Three
Lift height 6.5 in. (17 cm)
Net weight 73 lb (33.1 kg)

Home Maintenance Kits

LG265 home maintenance kit
Typical home maintenance kitTypical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

 

The LG265 home maintenance kit includes the following:

 

 Quantity

 Description

 1

 Engine oil filter

 2

 Engine oil quart

 1

 Fuel filter

 1

 Air filter element

 1

 Air filter element foam

 2

 Spark plug

Miscellaneous

12-V outlet12-V outlet

The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.

Battery chargerBattery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

  • Automatically determines if the battery is 6- or 12-V and adjusts accordingly
  • Helps maintain battery in good condition and ensures it is fully charged
  • Powers on to charge battery and powers off when fully charged
  • 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
  • 1.5-amp trickle charges small batteries in 2 to 12 hours
  • Maintains large battery charges
  • Hookup protection guards battery and charger from damage 

 

Includes a choice of battery connection methods:

  • Standard color-coded clips to connect to any battery
  • Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use
Bucket holder (single)Bucket holder (single)

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

Bucket holder (single)Bucket holder (single)

Transporting mulch, plants, or debris is easy with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. Its all steel construction enables it to carry up to 40 lb (18.1 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100W

5-gal. (19-L) bucket5-gal. (19-L) bucket

This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket - 5 gal. (19-L)
Order number: LPJD400

8-oz (237-mL) Fuel-Protect gasoline stabilizer8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

  • Has corrosion preventers
  • For lawn and garden equipment and other gasoline-powered vehicles
  • Ensures quick starts in all two- and four-cycle engines
  • Use in gasoline, gasoline-oil mixture, and ethanol blends
  • Use to treat gas cans at each fill-up or use at every fill-up of vehicle
  • Keeps fuel fresh for 12 months
  • Contains a fuel injector and carburetor cleaner
  • 1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.

Helpful tips:

  • Add fuel stabilizer every time fuel is purchased.
  • Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
  • John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
  • Use plastic fuel containers to store fuel; ask a local John Deere dealer.
  • For best results, use a spill-proof gas can that automatically seals the gas can vent.
  • Store fuel in a cool, dry, dark place in a sealed fuel can.
  • Fill tank to the top every time the machine is put away.
    • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

Wireless connector packagingWireless connector packaging

The John Deere MowerPlus hour meter connector wirelessly links a model year 2003 and later 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device:

  • No tools are needed for installation.
  • Detailed set-up instructions are included.
  • The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
  • The wireless connector and app work together to offer helpful information.

Tractor features available for viewing on the MowerPlus app include:

  • Tractor engine hours automatically synchronized to the app
  • In-app maintenance reminders and log, based on engine hours
  • Help to determine the best time to mow
  • Expert pre-mow optimization tips
  • Maintenance walk-through instructions

The operator is able to visit their device’s app store to see new app features as they are added.

MowerPlus hour meter connector (BUC10510) for 100 Series and S240 Lawn Tractors
Hour meter connector (socket end shown)Hour meter connector (socket end shown)
Hour meter connector (pin end shown)Hour meter connector (pin end shown)

The hour meter connector plugs into the back of a 100 Series or S240 Tractor key switch. The tractor’s wiring harness plugs into the other end.

Compatibility and requirements

BUC10510 MowerPlus hour meter connector is for model year 2003 and later 100 Series and S240 Tractors, including model series E100, D100, LA100, L100, and S240.

MowerPlus hour meter connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:

  • iOS® version 10 or higher is compatible with the hour meter connector.
  • Android™ versions are not compatible with the hour meter connector at this time.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

 

Seat net kitSeat net kit

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

Mower Blades

Side-discharge blade/mulching bladeSide-discharge blade/mulching blade
 
Side-discharge blade/mulching bladeSide-discharge blade/mulching blade
 

Mower Decks

48-­in. (122-­cm) Mower Deck (S240)48-­in. (122-­cm) Mower Deck (S240)

NOTE: Optional front center rollers shown in above mower deck photo.

A complete mower deck can be ordered for replacement, if required.

Incomplete decks are also available through the John Deere Parts system. These decks include only the shell, discharge chute, and decals.

This AUC12522 48-­in. (122-­cm) Accel Deep replacement mower deck comes with three medium lift, side-discharge blades.

Dry-condition kit componentsDry-condition kit components
Dry-condition kit installed on mower deckDry-condition kit installed on mower deck

The BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.

The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.

Mower deck leveling gaugeMower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

  • Lawn tractors
  • Lawn and garden tractors
  • Riding mowers
  • Front mowers
  • Commercial walk-behind mowers
  • Zero-turn-radius mowers

Mulch Kits

MulchControl advantages and benefits
Z535M ZTrak™ with Accel Deep 48A MowerZ535M ZTrak™ with Accel Deep 48A Mower
X730 Tractor with 48A Mower DeckX730 Tractor with 48A Mower Deck

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl baffle open (similar mower from X700 Series Tractor shown)MulchControl baffle open (similar mower from X700 Series Tractor shown)
MulchControl baffle closed (similar mower from X700 Series Tractor shown)MulchControl baffle closed (similar mower from X700 Series Tractor shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
MulchControl baffle closedMulchControl baffle closed
MulchControl handleMulchControl handle
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
    • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side-discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags
    • With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

Protection

Protective cover (medium deluxe)Protective cover (medium deluxe)
#

Features include:

  • Wipe-clean reinforced bottom around mower deck
  • Easy-on side handles makes snugging down cover a snap
  • Dual reinforced air vents let air circulate and help prevent ballooning in wind
  • Interior lining and integrated muffler heat shield
  • Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
  • Easy-on split back for fast fitting and easy access after installation
  • Handy storage pocket reverses into an attractive storage case
  • Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and S240 Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Protective cover (standard)Protective cover (standard)
#

Features include:

  • Dual vents let air circulate and help prevent ballooning in wind
  • Elastic shock cord in bottom hem for a quick, custom-like fit
  • Coated fabric for maximum water protection
  • One-year warranty

Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Protective cover (standard)

Order number: LP93917

Seat cover, deluxe mediumSeat cover, deluxe medium
#

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

  • Access to lumbar adjustment controls
  • Large-capacity rear-zippered cargo pocket
  • Two side mesh beverage pockets
  • Elastic cord in bottom hem for a custom fit
  • Medium size fits seats with backrests up to 15 in. (38.1 cm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, standard mediumSeat cover, standard medium
#

Seat cover protects new seats and renews old seats:

  • Cushioned seat for extra comfort
  • Four convenient pockets for keeping tools and gear within reach
  • Elastic cord in bottom hem for a custom fit
  • Medium size fits seats with backrests up to 15 in. (381 mm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

Spanish North American Kit

Spark Arrester

AM115838 spark arrester shownAM115838 spark arrester shown

Available to comply with laws in the state of California, requiring its use under certain conditions.

The law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered or grass-covered land (except on watered lawns) without a spark arrester.

For further information on this law, consult No. 442.5 of the California Public Resources Code. Also available in other states to comply with local ordinances or customer requests.

Sprayers

15-gal. (57-L) Mounted Sprayer for D100 Series, S24015-gal. (57-L) Mounted Sprayer for D100 Series, S240

The 15-gal. (57-L) tractor-mounted sprayer is compatible with the S240 and D100 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.

Features include:

  • Custom mounting hardware uses existing frame holes
  • Mounts in seconds after initial assembly
  • Compatible with S240 and D100 Series Tractors
  • SHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.
  • The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.
  • Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
  • Recirculation keeps material mixed and moving
  • Control valve directs spray to either the boom or spray wand
  • Convenient electrical hookup includes all necessary wiring
  • Rugged translucent yellow tank with molded fill-level indicators (in gal. and L)
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

15-gal. (57-L) Mounted Sprayer for D100 Series and S240 Tractors

Order number: LP53283

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind Sprayer15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

  • This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
  • A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

  • Sprayers provide an excellent way to apply liquid fertilizer.
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

  • Fertilizer is more readily available to plants.
  • The fertilizer need not be worked into the soil by watering or rain before it will work.
  • Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

25-gal. (95-L) Tow-Behind Sprayer25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

  • 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
  • Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
  • The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties.

  • Sprayers provide an excellent way to apply liquid fertilizer.
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

  • Fertilizer is more readily available to plants.
  • The fertilizer need not be worked into the soil by watering or rain before it will work.
  • Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

Spreaders

125-lb (57-kg) Pull-Type Spin Spreader 125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

  • Seed
  • Fertilizer
  • Insecticide
  • Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

  • Positive on/off system (no cables)
  • 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
  • 13-in. (33-cm) pneumatic tires for easy rolling
  • Enclosed gearbox (metal gears)
  • Ergonomic dual handle featuring Accu-way™
  • Accu-way even spread pattern adjustment
  • Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening
Hopper screen and throat openingHopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Dial-A-Matic rate control
Dial-A-Matic rate controlDial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

  • Dial position locks and unlocks automatically.
  • More than 80 settings provide an accurate application of materials.
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

Spinner
SpinnerSpinner

Spinners are made of high-impact plastic that will not crack or break.

Specifications

 

 125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type Spreader
Recommended marketHomeownerHomeowner
TypeTow-behindTow-behind
Bundle numberLP25353 
Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
HopperPolyethylenePolyethylene
Hopper screenAluminumAluminum
Hopper bottom plateStainless steelStainless steel
Throat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)
Connecting hardwareStainless steelStainless steel
Accurate application
Rate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knob
Rate gateNo-stick nylonNo-stick nylon
Rate gate linkageStainless steelStainless steel
Even dispersal
Spinner, in. (cm)12 (366)12 (366)
Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wide
Spread pattern equalizerAccu-way™Accu-way
Spinner shaftZinc-plated steelZinc-plated steel
Rotary agitatorStainless steelStainless steel
Miscellaneous
FramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)18 (45.7)18 (45.7)
Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metal
Axle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)
WarrantyOne-year limitedOne-year limited
Net weight, lb (kg)29 (13.2)34 (15.4)

 

Accu-way is a trademark of Spyker Spreaders, Inc.

175-lb (79-kg) Pull Spreader175-lb (79-kg) Pull Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

  • Seed
  • Fertilizer
  • Insecticide
  • Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

  • Positive on/off system (no cables)
  • 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
  • 13-in. (33-cm) pneumatic tires for easy rolling
  • Fully enclosed gear box with metal gears for long life
  • Accu-way even spread pattern adjustment
  • Includes screen and cover

 

Hopper screen and throat opening
Hopper screen and throat openingHopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner
SpinnerSpinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control
Dial-A-Matic rate controlDial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

  • Dial position locks and unlocks automatically.
  • More than 80 settings provide an accurate application of materials.
Specifications

 

 125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type Spreader
Recommended marketHomeownerHomeowner
TypeTow-behindTow-behind
Bundle numberLP25353 
Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
HopperPolyethylenePolyethylene
Hopper screenAluminumAluminum
Hopper bottom plateStainless steelStainless steel
Throat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)
Connecting hardwareStainless steelStainless steel
Accurate application
Rate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knob
Rate gateNo-stick nylonNo-stick nylon
Rate gate linkageStainless steelStainless steel
Even dispersal
Spinner, in. (cm)12 (366)12 (366)
Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wide
Spread pattern equalizerAccu-way™Accu-way
Spinner shaftZinc-plated steelZinc-plated steel
Rotary agitatorStainless steelStainless steel
Miscellaneous
FramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)18 (45.7)18 (45.7)
Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metal
Axle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)
WarrantyOne-year limitedOne-year limited
Net weight, lb (kg)29 (13.2)34 (15.4)


Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

40-in. (102-cm) Tow-Behind Aerator Spreader40-in. (102-cm) Tow-Behind Aerator Spreader
#

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

  • 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
  • 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
  • Three-position, full-sized lift lever
  • Direct spreader drive for consistent performance
  • Adjustable flow control
  • 100-lb (45-kg) spreader capacity
  • 4.10/3.5-4 pneumatic tires for easy pulling
  • 75-lb (34-kg) capacity weight tray
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications 

Width 40 in. (101.6 cm)
Aerator depth Up to 2 in. (5.1 cm), two positions
Spreader capacity 100 lb (45 kg)
Tines
Number of tips132
Diameter8 in. (20.3 cm)
MaterialSteel
Lift adjuster Manual
Wheels 4.10/3.5-4, pneumatic
Drive Direct
Weight-tray capacity 100 lb (45 kg)
Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
    The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader 130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

 

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Broadcast SpreaderBroadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

  • The polyethylene hopper will not dent or rust.
  • All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
  • Large pneumatic turf tires ensure a positive drive and smooth operation.
  • High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
  • Fully enclosed gearbox eliminates downtime and maintenance.
  • Autoflow feature stops the flow of materials - automatically - to prevent burns.
  • Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun Protection

Sun canopySun canopy

The sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.

Quick sun protection for 100 Series Tractors:

  • Slips into CargO Mount™ system ports for quick installation
  • Protects operator from the sun’s rays
  • Tough woven polyester construction for strength and durability
  • Designed to fit 100 Series Tractors

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Sun canopy
Order number: LP68122

 

Thatchers

40 in. (102-cm) Tow-Behind Thatcherator40 in. (102-cm) Tow-Behind Thatcherator
#

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

  • 40-in. (102-cm) width to cover ground fast
  • 20 spring-loaded tines for maximum performance
  • Three-position adjustment
  • Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Tines
Number20, spring-loaded tips
Diameter0.19 in. (0.5 cm)
MaterialSteel
Weight tray capacity100 lb (45 kg)
Lift adjuster Three positions
Wheel
Size8 in. (20.3 cm)
TreadRib
MaterialSteel
Optional extension 8 in. (20.3 cm)


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

Tire Chains

TerraGrip Traction BeltTerraGrip Traction Belt
#

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:
  • Rubber slats surround the tire and will not damage driveways or sidewalks.
  • No steel touches the driving surface.
  • No-tools installation utilizes a traditional steel chain attachment system.
  • Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
  • TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

  • X700 Series – requires wheel spacer sold separately
  • X500 Series – requires wheel stop adjustment
  • X300 Series – no additional requirements
Tire chain with optional wheel weights on X728 TractorTire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

42-in. (107-cm) Lawn Sweeper42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

  • 42-in. (107-cm) clearing width
  • 17-bu (599-L) capacity to make fast work of picking up material
  • Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
  • Hitch has seven positions to match up correctly with a variety of vehicles
  • Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
  • A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Brush heightSweeping conditions
Ground level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and
sidewalks
1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light
leaves
2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings

 

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

44-in. (112-cm) Lawn Sweeper44-in. (112-cm) Lawn Sweeper
#

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

  • 44-in. (112-cm) clearing width
  • 17-bu (599-L) capacity to make fast work of picking up material
  • Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
  • Hitch has seven positions to match up correctly with a variety of vehicles
  • Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
  • A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Brush heightSweeping conditions
Ground level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings

 

 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Dethatcher kit for sweeperDethatcher kit for sweeper
#

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Dethatcher kit for sweeper

Order number: LP42108

Multi ToolMulti Tool
#

The Multi Tool includes one platform and two separate attachments, saving space and money.

 

  • Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
  • Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
  • Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
  • Elongated handle - makes it easier to raise into transport or lower for use
  • Spring assisted lever - makes changing the attachments quick and easy


John Deere has combined the best lawn tools into one package.

Two-year warranty.

 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

Multi Tool

Order number: LP39089

36-in. (91-cm) Tow-Behind Lawn Roller36-in. (91-cm) Tow-Behind Lawn Roller
#

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

  • 36-in. (91-cm) wide polyethylene drum
  • 390-lb (177-kg) weight for excellent leveling
  • Rounded end caps to reduce gouging
  • 42-U.S. gal. (159-L) capacity
  • Long-lasting Nylatron® bearings

Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

Specifications

 

Width 36 in. (91 cm)
Roller
Size36 in. x 18 in. (91 cm x 46 cm)
Capacity42 U.S. gal. (159 L)
Weight (filled)390 lb (176.4 kg)
Drum/end-cap material High-density polyethylene (HDPE)
Bearings Nylatron

 


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
40-in. (102-cm) Tow-Behind Plug Aerator40-in. (102-cm) Tow-Behind Plug Aerator
#

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

  • 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
  • Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
  • 28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
  • 1-in. (2.5-cm) diameter high-carbon steel-tine shaft
  • 4.10/3.50-4 pneumatic tires for easy pulling
  • 175-lb (79-kg) capacity weight tray
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

Specifications

 

Width 40 in. (101.6 cm)
Aerator depth Up to 3 in. (7.6 cm)
Tines
Number of tips28
Spacing6 in. (15.2 cm) apart
Material Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel
Lift adjuster Manual, three position
Wheels 4.10/3.5-4, pneumatic
Weight-tray capacity 175 lb (79.4 kg)
Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
    The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
40-in. (102-cm) Tow-Behind Spiker Aerator40-in. (102-cm) Tow-Behind Spiker Aerator
#

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

  • 40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
  • 10-in. (25-cm) diameter steel-tine stars
  • 132 steel-tine tips on 11 spike wheels
  • 3.5-in. (9-cm) spike-wheel spacing
  • Full-sized lift lever
  • 4.10/3.5-4 pneumatic tires for easy pulling
  • 100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Aerator depth Up to 2 in. (5.1 cm)
Tines
Number of tips132
Diameter10 in. (25.4 cm)
Spacing3.5 in. (8.9 cm) apart
MaterialSteel
Lift adjuster Manual
Wheels 4.10/3.5-4, pneumatic
Weight tray capacity 100 lb (45 kg)


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Weather Enclosures

Snow cab shown on a D100 Series TractorSnow cab shown on a D100 Series Tractor

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind to make snow removal a more pleasant experience.

The snow cab is compatible with all 100 Series and S240 Tractors:

  • D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, and S240
Zippered-access hole for control armZippered-access hole for control arm
Inside mesh storage pocketInside mesh storage pocket

Roomy steel frame cab shields against snow, rain, sun and wind.

Key features include:

  • Double-zippered access hole for control maneuverability
  • Interior mesh pockets to hold accessories
  • Super-clear vinyl windows are cold-crack tested to -4°F (-20°C)
  • Internal non-scratch magnets to ensure a custom fit - no tool necessary
  • Zippered doors have a snap-lock system to hold them open
  • Rear locking panel holds enclosure tight against tractor frame
  • Assembles and installs with standard hand tools
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Snow cab

Order number: LP68121

Weights

34-lb (15.4-kg) front wheel weight34-lb (15.4-kg) front wheel weight

A durable cast-iron weight can be mounted to each front wheel.

These weights are recommended for use when operating on slopes, especially when the tractor is equipped with a rear grass bagger or other rear-mounted equipment.

Each weight requires BM17978 mounting hardware.

42-lb (19-kg) Quik-Tatch weight42-lb (19-kg) Quik-Tatch weight
42-lb (19-kg) weights and optional mounting bracket42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

  • One  M147986 weight retaining rod (Parts)
  • Two  M40461 spring clip (Parts)
Rear weight bracket shown with two 42-lb (19.1-kg) weightsRear weight bracket shown with two 42-lb (19.1-kg) weights
Rear weight bracketRear weight bracket

The rear suitcase weight provides extra ballast that is needed to reduce wheel slippage and increase snow-removal capability.

 Rear weight bracket (BG20022 shown) Rear weight bracket (BG20022 shown)
Rear weight bracket shown with two 42-lb (19.1-kg) weightsRear weight bracket shown with two 42-lb (19.1-kg) weights

The rear weight bracket provides a tractor-mounted bracket for hanging two weights:

  • BG20627 replaces BG20022 and BG20499 rear weight brackets.
  • Clearance is provided for the carbon canister that is required on tractors sold in California.
  • BG20627 can be used in all applications where BG20022 and BG20499 were used.
30-lb (13.6-kg) front wheel-weight shown30-lb (13.6-kg) front wheel-weight shown

Hardware is required for installing each front-wheel weight.

Requirements:

  • Mounting may require drilling two holes in the wheel rim.
  • BM17978 mounting hardware kit is required for each weight.

NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

Reviews

4.75

8 reviews

Rating Snapshot

7
0
1
1
0
4.63
4.75
4.88

decent but not bug free

3/5

I owned a Deere LT190 for 15 yrs. i put about 340 hrs on it with its Kawasaki and decided it was time to buy a new Deere, I bought the S240 with the 48 inch deck and 18.5 Kawasaki for my 2 acres here in Florida. The machine cuts fine . I see a few improvements over the comparable LT190's deck - beefier. My only gripe is I have already broken one deck belt at less than 35hrs. The belts are NOT cheap ! The parking knob also fell off ? The machine for whatever reason seems a tad slower too compared to my old LT190 ?????? Anyway we will see if it lasts as long as my 190 did . I had to put on about 2 sets of spindles on my Lt190 in its lifetime ...I hope these S240 deck spindles last - only time will tell.

Pros

  • beefier deck and casters

Cons

  • knob fell off - seems slow

JFK65

From: Montverde Fl.

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

Love my mean green machine!

5/5

I have had my S240 for 2 months now. I really like it. My old rider was given to me from a neighbor. A 1996 red one. What a difference with this new John Deere S240!!! PROS: Quality built - once you sit your honey down you can just feel how well it is put together. SPEED - compared to I had this thing is a Ferrari! ZOOM!!! TURNING RADIUS: Pretty dang sharp! A lot better than I was use to. ERGONOMICS: SIMPLE! You don't need a PHD to figure out how to run this machine. :) MAINTENANCE: Simple schedule to follow. Yes, you can do it yourself. There are a ton of YouTube videos that show step by step. STORAGE: Has a nice compartment and a CUP HOLDER!!!!! Now I have a place to put my.......soda. Ahem. ACCESSORIES: A bunch! I have the deluxe mulching kit installed - love it! Have the bagger which I'll use in the fall. The 7P dump cart - ROCKS! The JD grease gun is nice as well. I also took the extended warranty - for the price you just cant beat the coverage! CONS / THINGS TO KNOW: SPEED & SUSPENSION - If you are like me and your current (old) rider is well broken in you will notice quite a difference. You sit higher, the feel is firmer because the machine is so well put together and I recommend easing into your usage so you dont throw yourself off....lol REVERSE ENGAGE BUTTON: Well, it's for safety so...... In reality it's not THAT inconvenient but it takes getting used to. PARKING BRAKE: In order to have your machine run while not seated the parking brake must be engaged. Another thing you get used to but..... Ugh. TIRE WIDTH VS TURN RADIUS: I wish the tires, from outer of left to right was an inch or two narrower. The turning radius is much sharper than you can cut. What I mean is I now around a tree and firepit, both with curving around and I cant hug it 360° like my old one. I've gotten use to it. Then again, the wider the wheelbase the better the ride. So it's a lil give and take. I HIGHLY RECOMMEND THIS MODEL!

Pros

Cons

From: Menasha, wi

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

my first new riding mower ever

5/5

Could not have picked a better mower. Im a large man 6'5" 295lbs. This mower is very sturdy and comfortable. I mow an acre yard weekly. I have had mower for three years and she still runs like the day we had her delivered. I would recommend foregoing the home improvement store mowers and upgrade to this mower. It is obviously more money but in my opinion well worth it. This mower is much sturdy and built with thicker stronger material.

Pros

Cons

BigD306

From: Portland Tn

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

John DEeere at it's best

5/5

Great Lawn Tractor...John Deere at it's best...Worth every penny!!!!!

Pros

  • powerfull
  • great cut
  • easy handling
  • nice ride

Cons

  • bigger gas tank

saved

From: Mathews Va.

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Loads of Value

5/5

Found this tractor has most of the important 300 series features such as same engine, seat, better transaxle than 100 series without the added cost. It doesn't have an electronic dash, the heavier 300 series frame nor the foot-pedal to assist deck lift. (This deck raises/lowers easily with handle on fender).The S240 makes quick work for my 2 acres with the optional 48" deck. A super value to me.

Pros

  • upgrade to the 48" deck
  • kawasaki engine has more than adequate power
  • can cut 2 acres without refilling
  • electric pto

Cons

Jlb56

From: Illinois

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Great Mower

5/5

Overall I am very satisfied with this mower. The construction is very high quality. My previous Big box store mower had a cheap spot welded front axle which bent from going down hills with the need to turn at the same time and did not have bearings for the front wheels. It had bushings which wear out. The steering and turning radius on this mower is great. I also love the engine and the mowers ability to handle small hills. My previous mower had the same horsepower but could not handle my yard like this one. My only complaint is that the accelerator pedal takes quite a bit of effort while riding it but I have not yet tried the cruise.

Pros

  • construction quality
  • steering
  • percormance

Cons

  • accelerator pedal stiffnes

CP954

From: Coral Springs, FL, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Works....

5/5

This John Deere replaces an 18 year old one (LT133). It cuts the grass better and the steering is very easy. Comfortable riding, but I would like to see larger front tires as what comes on it seems small when mowing in less than perfect ground. Gas tank could hold more as it will not mow all of my lawn on one tank. Overall satisfied with my purchase.

Pros

  • price
  • kawasaki motor
  • steering

Cons

  • small front tires
  • small gas tank

ch612

From: PA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Glad to see made in Tennessee

5/5

This model is replacing a previous purchased JD Lawnmower from 17 years ago. From the previous mower, the features that I was glad to see was the the seat adjustment and how the raising of the mower deck. Enjoyed the steering of this model from the previous model. Having a fuel gauge makes it easier about refueling and preparing it for storage in the fall. From the first JD lawn mower to the lawn mower I purchased, I went ahead and got the extra features that came on this mower then the basic model available. Looking to get another 15 to 20 years of service from this mower.

Pros

Cons

Commdrdave

From: 3609 Florence Blvd, Florence, AL 35634, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5