×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

1775 FLEX PLANTER

Drawn Planter

  • 12 rows on 30-in. spacing
  • Available in 1.6-bu. or 3-bu. MaxEmerge™ 5 row unit
  • Insecticide option for 1.6-bu.
  • 2-section frame flexes 20 degrees up & 30 degrees down



View Product Brochure



Features



MaxEmerge 5 with 56-L (1.6-bu) hopper plus insecticideMaxEmerge 5 with 56-L (1.6-bu) hopper plus insecticide
MaxEmerge 5 with mini-hopper on Central Commodity System (CCS™) machines onlyMaxEmerge 5 with mini-hopper on Central Commodity System (CCS™) machines only

The MaxEmerge family of row-units have never seen a more versatile and efficient design until the MaxEmerge 5. The 5-family row-units improve productivity, increase uptime and lower the cost of ownership like never before.

 

The MaxEmerge 5 row-unit was designed for improved performance and serviceability.

#
#

Serviceability and changing crops has always been a focus of downtime and potential seed loss. MaxEmerge XP row-units (shown on the left) are designed with the meter and hopper as one component. The frame covers the meter so that it cannot be accessed. Cleanout of excess seed requires the operator to take the entire hopper off of the row-unit and to turn it upside down. The MaxEmerge 5 meter (shown on the right) is accessible without having to remove the box. The MaxEmerge 5 design allows large hoppers to be cleaned out the same as mini-hoppers, simply by opening the meter dome and catching the seed as it falls out. This improvement allows operators to change seed varieties easier and three times faster than it took them on the previous MaxEmerge XP units and provides more uptime during the tight planting window.

MaxEmerge 5 vacuum seed meterMaxEmerge 5 vacuum seed meter

The vacuum meter system gently pulls and holds individual seeds to the holes of the seed disk for population control and spacing accuracy, equaling better crop stands and profit. Vacuum seed meters can plant a wide variety of crops and seed types by simply changing seed disks and adjusting vacuum level. Vacuum seed meters are available for planters with MaxEmerge 5 row-units.

 

Additional features of the vacuum seed meter include:

  • One moving component (the seed metering disk) for minimum maintenance requirements
  • Meter located at each row-unit for accurate seed delivery
  • Good hopper seed flow characteristics for longer operating time per hopper fill
  • Low airflow in meter so seed treatments are not removed
Pro-Series™ row-unit seed poolPro-Series™ row-unit seed pool
MaxEmerge 5 seed poolMaxEmerge 5 seed pool

The MaxEmerge 5 meter shape has also been redesigned for better seed flow. The mini-hopper design allows the planter to successfully operate on side hills up to 14 degrees.

Vacuum meter hub and latching handle
MaxEmerge 5 vacuum meter with diskMaxEmerge 5 vacuum meter with disk

Both the MaxEmerge 5 vacuum meters are equipped with a heavy-duty hub spring and disk latching handle. The spring ensures the seed disk stays properly positioned when operating flat-style seed disks and higher vacuum levels. Proper seed disk positioning means repeatable seed singulation, time after time. The disk-latching handle is designed for easy operation and effortless seed disk changeover. The hub is also machined to tight tolerances to further ensure alignment of metering components.

Flat-style and cell seed disks shownFlat-style and cell seed disks shown

The unique cell disk design allows planting a variety of seed sizes without any additional parts or individual meter adjustments. Another advantage of cell-type seed disks is the lower vacuum requirement compared to flat-style seed disks. Lower vacuum levels mean less hydraulic demand from the tractor. Most planting conditions call for a flat disk, if you are limited in hydraulic capacity, cell disks are recommended.  

Operating characteristics of vacuum seed meter
Operating speed with seed tube technologyOperating speed with seed tube technology

The vacuum seed meter is capable of operating at faster planting speeds than mechanical meters. However, planting accuracy will be influenced by seedbed conditions and the operating characteristics of the seed meter. Rough seedbeds and fast planting speeds (above 8.9 km/h [5.5 mph]) typically deteriorate seed placement accuracies when using seed tube technology.

 

The chart illustrates the effect operating speed has on population when using the vacuum meter. The operating band (color area) illustrates how the vacuum meter performs in relation to the desired population (indicated by horizontal line). The width of the band is due to various sizes and shapes of seeds and planting rate variations.

 

When operating on slopes above 15 degrees, increased or decreased population may result. To minimize this effect, reduce speed and consider using a flat style seed disk with increased vacuum level.

Vacuum meter seed disks

The ProMax 40 Flat Disk is a flat-disk planting solution field-proven to work since 1991.

#

The design of the ProMax 40 Flat Disk position allows seed to be released from the optimum position above the seed tube. The flush-face seed tube allows the seed to drop uninterrupted through the tube.

 

The ProMax 40 Flat Disk utilizes flat holes and a higher vacuum level to ensure every hole is populated with a seed. A double eliminator gently removes multiple seeds at each hole for precise population control. A knockout wheel makes certain that each hole is clear of any debris after the seed is released from the disk.

Double eliminator
#

For difficult to singulate seeds, a flat seed disk and double eliminator is a viable alternative to traditional cell-type seed disks. By design, a flat seed disk requires higher levels of vacuum than a cell-type disk because there is no pocket or cell to hold the seed. The higher vacuum level will pull more than one seed to the holes in the seed disk. The double eliminator is set to cover a portion of the hole in the seed disk and is the mechanism to knock multiple seeds away as the disk rotates.

 

Double eliminators are required with flat-type seed disks only and should not be used with cell-type seed disks. The knockout wheel is also recommended in conjunction with the double eliminator and flat seed disk to ensure seed is ejected from the disk.

 

Flat and celled type seed metering disks are available to allow planting a wide variety of seed types.

  • Corn (field, popcorn, or sweet corn)
  • Soybeans
  • Cotton
  • Sorghum
  • Sugar beets
  • Sunflowers
  • Edible beans/peas
  • Peanuts
  • Melons, squash, cucumbers

Mini-hopper row-units, which are used only with the CCS, are compatible only with crops that the CCS is approved to plant.

  • Corn
  • Popcorn
  • Sweet corn
  • Soybeans
  • Sunflowers
  • Sorghum
  • Cotton

NOTE: Due to small seed size and low planting populations, sugar beets can be planted with mini-hopper style meters by adding hopper extensions and not using the CCS tank. These hopper extensions can also be used for planting test plots.
 

Hopper shutoffHopper shutoff
#

Also, to help with meter access of 56-L and 106-L (1.6-bu and 3-bu) hoppers the hopper shutoff feature was added. With the shutoff engaged, the meter cover can be opened without first having to remove all of the seeds from the hopper. Lever down, the seed flow is on, lever horizontal and the seed flow is off.

MaxEmerge 5 mini-hopperMaxEmerge 5 mini-hopper
#

There are significant changes to the MaxEmerge 5 mini-hopper. One update is the straight feed from the CCS hose to the mini-hopper to ensure a continuous free flow of seeds. This design change reduces the potential for plugging issues with larger seed size and the use of seed treatments. By drawing air from the CCS tank, the vacuum source is cleaner, preventing meter debris buildup.

Ductile iron-cast shankDuctile iron-cast shank
#

Ductile iron casting is a unique high-tech process that produces a single-piece row-unit shank this enables alignment from the seed trench to the closing wheel.

 

The row-unit head is also designed using the ductile iron-casting process. The row-unit head provides the mating joints between the row-unit parallel arms and the row-unit shank. It is also the upper attaching point for the seed meter and seed hopper.

 

Ductile iron casting of the row-unit shank and head assembly provides a row-unit that is 25 percent stronger than other competitive welded row-units.

Rubber tire closing systemRubber tire closing system
Cast wheel closing systemCast wheel closing system

Rubber tire closing systems are used for most conventional, minimum-till, and no-till planting conditions. The spacing between the wheels is adjustable so the closing system can meet the needs of those who want to plant small seeds at shallow depths.

 

The wheels can also be staggered fore and aft to enhance residue flow. Four levels of spring force are available and are easily set with the integrated T-handle adjustment. A lower force spring can be obtained from parts, if a lower amount of force is required.

 

Additional closing wheel options include:

  • Cast closing wheels, for tough-to-close conditions
  • Disk closing, for shallow planting depths
  • Closing wheel frame less wheels, for growers desiring to use aftermarket closing wheels
#

One of the trademark capabilities of John Deere planters has always been the ability of the Tru-Vee openers to provide an ideal seed furrow.

 

The thickness of the Tru-Vee opener blade is 3.5 mm (0.14 in.) this blade thickness will provide extended wear life.

 

The MaxEmerge 5 row-unit also provides better Tru-Vee opener bearings for longer life. The double-row ball bearing provides up to three times the wear life as the single-row bearing.

Depth adjustment T-handleDepth adjustment T-handle
#

John Deere planters provide consistent seed depth control in all field conditions. Depth control is a function of the Tru-Vee openers, the downforce system, and the gauge wheel assembly.

 

The gauge wheel itself is made of durable nylon composition with a concave profile. This profile gently firms the sides of the seed furrow, ensuring a well-defined trench. The shape reduces rocks and residue being picked up and thrown onto the drive chains and row-units, and helps to prevent rooster tailing of soil.

 

The bolt-through design utilizes an open bearing in the gauge wheel that allows an attaching bolt to pass through the wheel to the threaded hole in the gauge wheel arm. This simple bolt-through design provides for a positive attachment of the gauge wheel to the gauge wheel arm and allows quick removal of the gauge wheel for service.

 

Adjustability of the row-unit is critical to good performance. More available downforce options than any row unit in the industry

  • Adjustable heavy-duty downforce, four settings, 0 kg (0 lb), 57 kg (125 lb), 113 kg (250 lb), and 181 kg (400 lb) of downforce
  • Pneumatic downforce, infinitely variable from 0 to 181 kg (0 to 400 lb) of downforce
  • Active pneumatic downforce adjusts automatically for changing ground conditions from 0 to 181 kg (0 to 400 lb) of downforce

Integrated innovation is what operators will appreciate with the SeedStar 2 monitoring system and GreenStar™ 2 Display. An increasing number of acres combined with rising seed costs drive the need to easily understand planter functions and monitor performance. It is all about making every seed count and that is what SeedStar 2 delivers. 

 

The SeedStar 2 monitoring system is a full-feature, color, seed population monitor used in conjunction with the GreenStar family of displays. SeedStar 2 is compatible with the GreenStar 2 1800 and 2600 Displays, GreenStar 3 2630 Display, the Gen 4 4200 CommandCenter™ Display, the Gen 4 4600 CommandCenter Display, the 4240 Universal Display, and the 4640 Universal Display. SeedStar 2 is not compatible with the Gen 4 Extended Monitor. Conveniently, SeedStar 2 planting functions are fully integrated with the full spectrum of Precision Ag Technology applications—guidance, coverage maps, and field documentation can be shown all on one display.

 

When a SeedStar 2 system is used on a planter, there is no need for a ComputerTrak™ monitor. All vital planting information is displayed in one central, easy-to-read location.

SeedStar 2 features
SeedStar 2 full-screen planter run pageSeedStar 2 full-screen planter run page

SeedStar 2 is a user-friendly system that has retained all the valued features of SeedStar and incorporated the next generation of enhancements. For example, on-screen color indicators show drive engagement/disengagement status. In addition, three color planter-at-a-glance bars (black, orange, or red) visually inform the operator of row population status.

 

Not only does SeedStar 2 incorporate the use of color, it also utilizes an intuitive icon and folder based operator interface. Icons are easy to understand across many languages and reduce the need for text. Icons for planter main run page, planter setup, seed/crop setup, totals, and diagnostics are located in the soft-key region of the display. Setup is performed by selecting the appropriate icon and then choosing the tabs to enter/select information.

 

The SeedStar 2 monitor offers all of the features and functionality of the ComputerTrak 350 monitor and much more. SeedStar 2 monitors the following planter functions:

  • Row population/spacing
  • Row failure
  • Average population (entire planter and by variable-rate drive [VRD] motor section)
  • Vacuum level
  • Fertilizer pressure
  • Acre counter
  • Total acreage
  • Tractor speed

In addition, planter operational information is available within the SeedStar 2 monitor system. Such operational information includes population charts, seed disk vacuum settings, and setting recommendations for the piston pump liquid fertilizer system.

 

All SeedStar 2 systems have the capability, through a single controller, to perform both the seed monitoring and variable rate drive functions. SeedStar 2 monitoring is required for VRD population control. Even though the planter may not be equipped with SeedStar 2 VRD, the SeedStar 2 monitoring system is available and will allow for future installation of VRD.

SeedStar 2 enhancements
SeedStar 2 half-screen planter run pageSeedStar 2 half-screen planter run page
SeedStar 2 showing half-width disconnect statusSeedStar 2 showing half-width disconnect status

The SeedStar 2 enhanced planter features include:

  • GreenStar 2 display integration – eliminates the need to operate the GreenStar 2 2600 Display in the original GreenStar monitor mode or the use of dual displays.
  • User-friendly, intuitive icons
  • Half- or full-screen run page
  • On-screen, color drive status – a quick glance at the display tells the operator if the half-width disconnect is engaged or disengaged.
  • Three-color planter-at-a-glance population bar – a black bar indicates that population is close to target and within established limits; orange shows the population is above/below the alarm set point; and red signals the population is out of operating range or is not planting.
  • Three-piece, color VRD indicator – each piece of the VRD gear pie turns green when the wheel motion sensor is active, planter is lowered, and drives are engaged.
SeedStar monitoring original features

SeedStar 2 retains all those SeedStar features that producers value and have come to expect:

  • Planter at a glance – allows operator to view relative population levels of all rows on one screen.
  • Automatic valve calibration – with the SeedStar VRD, this is now completed automatically. There is no longer a need to manually calibrate the hydraulic valves.
  • Increased population updates – SeedStar will now update population levels once a second at planter start up then approximately once every three seconds.
  • Mapping of actual seed rates – When combined with Field Doc™ system, actual and target seeding rates can now be mapped in APEX™ software.
  • Reprogrammable utilizing controller area network (CAN) via Service ADVISOR™ diagnostics system.
  • Improved diagnostics/event recorder – on SeedStar VRD planters, additional diagnostic information is available, as well as an event recorder to capture system performance data at a specific point in time.
  • Ability to run motors at different population levels – on SeedStar VRD, operators running multiple motor systems can run each motor at a different speed, allowing different population levels within a planter.
  • User-configurable high fertilizer pressure alarm – allows the operator to be warned when fertilizer pressure reaches a specific level.
  • Automatic quick-start for SeedStar VRD – the operator no longer needs to press the quick-start button on end row turns to resume planting.
  • Automatic tractor speed source selection – when equipped with an 8000/9000 Series Tractor, the system selects the radar speed or allows for manual speed input selection.

Crop yields have increased through the years along with the amount of residue left in the field after harvest. At the same time, tillage practices have changed, including different tillage operations which maintain large amounts of surface residue, and even no-till practices. Row cleaners are an essential tool in managing this increased amount of residue.

 

John Deere seeding group offers a variety of row cleaner options to meet the needs of a producer's operation. Compatibility varies by model, row spacing, and other planter equipment.

Screw-adjust, unit-mounted row cleaner
Screw-adjust, unit-mounted row cleanerScrew-adjust, unit-mounted row cleaner

The screw-adjust, unit-mounted row cleaner is mounted directly to the face plate of the row-unit, placing the ground engaging components just in front of the row-unit opener blades and depth gauge wheels. This close proximity allows the gauge wheels to control the depth of the row cleaner as well as the row-unit. This compact design also allows greater compatibility with fertilizer openers and other planter attachments.

 

SharkTooth® wheels are standard equipment on the unit-mounted row cleaner. The swept-tooth design of the wheel provides a clear path for the row-unit openers while resisting residue buildup on the wheel. The screw adjustment knob is accessible through the top of the parallel arms, providing convenient access for adjustments. The row cleaner can be adjusted in 1.6-mm (1/16-in.) increments, providing plenty of flexibility to meet the needs of changing conditions.

Floating row cleaner with unit-mounted coulter
Floating row cleaner with unit-mounted coulterFloating row cleaner with unit-mounted coulter

The floating row cleaner allows a row cleaner to be used in conjunction with a unit-mounted coulter. This combination is often desired in heavy residue loads and reduced tillage planting conditions. The row cleaner provides a clear path for the row-unit, while the unit-mounted coulter helps penetrate tough soil conditions.

 

Accommodating the unit-mounted coulter means the residue wheels are farther forward from the row-unit face plate than in the case of the screw-adjust row cleaner. To maintain performance, this row cleaner has the capability to float above a defined minimum depth.

 

Standard depth-gauging bands on the wheels allow the row cleaner wheels to float independently of the row-unit openers, allowing both to perform in varying terrain. The unit may also be set in a fixed position by simply pinning through the bracket if desired. This row cleaner also features SharkTooth wheels as standard equipment.

 

The floating row cleaner and unit-mounted coulters are available on many planters as factory-installed equipment. As compatibility and details vary by model, review the following links for information on specific planter models.

NOTE: Screw-adjust row cleaners are not compatible with MaxEmerge™ 5e row-units with long parallel arms.

 

NOTE: DB models have the option for either unit-mounted coulter, screw-adjust row cleaners, or pneumatic row cleaners (only compatabile with MaxEmerge 5e or equipped ExactEmerge™ models). The DB60T is only available with a less row cleaner option.

 

SharkTooth is a trademark of Yetter Manufacturing, Inc.

RowCommand controls seed output
RowCommand on a MaxEmerge™ 5 row-unitRowCommand on a MaxEmerge™ 5 row-unit
RowCommand on a chain drive MaxEmerge 5 row-unitRowCommand on a chain drive MaxEmerge 5 row-unit

Controlling input costs and improving productivity are key producer requirements today. RowCommand is an effective, integrated John Deere solution designed to meet these intensifying needs. The RowCommand system manages seed output, reduces yield drag, and improves harvest capabilities on all Pro-Shaft™ driven row-units, and chain-driven MaxEmerge 5.

 

NOTE: Chain-drive RowCommand is only compatible with planters equipped with pneumatic downforce systems. On planters equipped with the heavy-duty downforce springs, potential chain interference may result and is not recommended.

 

NOTE: Chain-drive RowCommand requires some modification to brackets in order to function with corn finger pickup meters.

 

NOTE: Pro-Shaft drive RowCommand is compatible on MaxEmerge 5 row-units with vacuum and corn finger pickup meters. For mini-hopper row-units, RowCommand is compatible on vacuum meters only and is not compatible on corn finger pickup meters. Pro-Series™ XP row-units with corn finger pickup meters are not compatible with RowCommand.

 

RowCommand controls seed output by incorporating individual, low amperage clutches inside the Pro-Shaft and chain-driven gearboxes. Clutches are completely enclosed within the gearbox housing to protect them from the elements and harsh operating conditions.

 

When power is supplied, either manually or through John Deere Section Control software, clutches disengage the seed meters and seed flow stops. Controlling seed output at individual rows reduces overplanting in point rows and maximizes seed placement when entering/exiting headlands.

Components and operation
Electronic power modules shown on a 1775NT PlanterElectronic power modules shown on a 1775NT Planter
RowCommand clutch on MaxEmerge 5 with 105.7-L (3-bu) hopperRowCommand clutch on MaxEmerge 5 with 105.7-L (3-bu) hopper

RowCommand is a simple and efficient solution to control individual row planting. This system does not utilize air to operate; therefore, no compressor, air lines, or valve modules are required.

 

RowCommand utilizes low-voltage controller area network (CAN) messaging to signal power to the desired clutches to stop planting or eliminates power to resume planting.

 

This means very little power is used in normal planting conditions, and in the event a clutch fails electrically, the meter will continue to plant.

The RowCommand system requires the following five basic components to operate: 

  • Electric clutches
  • Electronic power modules (EPMs)
  • SeedStar™ 2 monitoring (wedge box/controller)
  • GreenStar™ (GS) display
  • Planter wiring harnesses

Clutches are protected within the sealed Pro-Shaft and chain-driven gearboxes for years of trouble-free operation and simple installation or removal. RowCommand has true individual-row control of up to 16 clutches or sections for planters larger than 16 rows.

 

Unique to RowCommand, the 16 available control sections can be configured based on operator preferences. For example, on a 1775NT 24-Row Planter, every two rows can be paired together for a total of 12 control sections, or control the outermost eight rows individually and the remaining inner rows paired together for 16 control sections.

 

While SeedStar with RowCommand has 16 control sections, a minimum of 152.4-cm (60-in.) wide sections are recommended for optimum Swath Control Pro™ solution capabilities. As with other Swath Control Pro products, an SF2 signal is the minimum level of accuracy recommend for operation.

Pro-Shaft drive RowCommand planters

RowCommand is available as a factory-installed option or as an attachment for field conversion attachments for the following Pro-Shaft drive planter models (see chart below).

 

Planter model Row configuration
 1725 12-row narrow, 12-row wide, and 16-row narrow 
 1725 Central Commodity System (CCS™) 16-row narrow
 1765 12-row narrow
 1775 12-row narrow
 1775NT 12 row, 16 row, and 24-row narrow
 1775NT CCS 12 row, 16 row, and 24-row narrow
 1795 12/23 row, 12/24 row, 16/31 row, and 16/32 row
 1795 24 row, 50.8 cm (20 in.)
 DB 44 24 row, 55.9 cm (22 in.)
 DB 58 32 row, 55.9 cm (22 in.)
 DB 60 36 row, 50.8 cm (20 in.) or 47 row, 38.1 cm (15 in.)
 DB 66 36 row, 55.9 cm (22 in.)
 DB 80 32 row, 76.2 cm (30 in.) or 48 row, 50.8 cm (20 in.)
 DB 88 48 row, 55.9 cm (22 in.)
 DB 90 36 row, 76.2 cm (30 in.)
 DB 120 48 row, 76.2 cm (30 in.)
 DR (Deere/Orthman™ planter) 16R40 16 row, 101.6 cm (40 in.)
 DR (Deere/Orthman) 18R38 18 row, 96.5 cm (38 in.)
Chain-drive RowCommand planters

In terms of planter compatibility, RowCommand for chain drive is designed for the following planter model configurations equipped with pneumatic downforce systems.

 

Planter model Row configuration
 1725 12-row narrow, 12-row wide, and 16-row narrow 
 1765 12-row narrow
 1775 12-row narrow
 1775NT 12 row and 16 row
 1775NT CCS 12 row and 16 row
 DB 44 24 row, 55.9 cm (22 in.)
Chain-drive RowCommand and heavy-duty downforce
Chain interference with heavy-duty downforceChain interference with heavy-duty downforce

As seen in the image, chain interference may result when operating chain-drive RowCommand on planters equipped with short and long parallel arms and heavy-duty downforce springs.

 

NOTE: Chain-drive RowCommand is only compatible with planters equipped with pneumatic downforce systems. On planters equipped with the heavy-duty downforce springs, potential chain interference may result and is not recommended.

 

Chain-drive RowCommand with corn finger pickup meters
Bracket material removalBracket material removal

Due to the design characteristics of the chain-drive RowCommand clutch, some modification to the corn finger pickup meter drive bracket is required. As seen in the picture to the left, some material needs to be removed from the front of the meter drive bracket in order for the chain-drive RowCommand clutch to have sufficient space for installation.

 

NOTE: Chain-drive RowCommand requires some modification to brackets in order to function with corn finger pickup meters.

RowCommand ordering information

To add RowCommand to a model year 2009 and newer planter model listed above is simple. Pro-Shaft drive attachments for field conversion and chain-drive attachments for field conversion are available by planter model to add the appropriate number of clutches, EPMs, brackets, hardware and row-unit harnesses. For complete installation and part detail for the RowCommand conversion, please use the RowCommand compatibility tool per specific planter model.
 
RowCommand is compatible and available for model year 2003 (serial number 700101) to 2008 (725101) planter models listed above. In addition to the attachment for field conversion attachment, a planter mainframe harness, SeedStar 2 controller (wedge box), and additional CAN harnesses are needed.

Integrated Swath Control Pro

Coupling RowCommand with Swath Control Pro provides the ultimate in precision planting and productivity. One company, one integrated solution are what we offer by incorporating Swath Control Pro capabilities within the SeedStar 2 wedge box (controller). Unlike previous systems, no rate controller, additional harnessing, or components are required to achieve automated individual-row control.

 

SeedStar 2 monitoring, RowCommand, and Swath Control Pro activation from John Deere Precision Ag Technologies are all that is needed when ordering.

System requirements

RowCommand is a simple and efficient means to control individual row planting through the use of low-voltage electric clutches. When activated, each clutch consumes no more than 0.5 amps. By design, power is only supplied to the clutch when a signal is received to stop planting. In a normal planting condition, no power is supplied and the clutch is de-energized. 

 

Power for the RowCommand system is provided from the 9-pin ISO implement connector. All late-model 8X00 and 9X00 Series John Deere Tractors equipped with the 9-pin ISO implement connector are capable of supplying ample power for system operation.

 

Along with ample system power, a GreenStar display and SeedStar monitoring are required for operation and control interface. The GreenStar display is where system setup, control settings, and manual control functions are performed.

Seed variable-rate drive provides the ultimate planting productivity by utilizing one, two, or three hydraulic motors (varies by model) to turn the seeding drive shaft. Hydraulic control of the seeding drive allows for on-the-go seeding rate changes right from the display mounted inside the tractor cab. Combine this seeding flexibility with the map-based planting option, and seeding rates adjust automatically based on the prescribed map. 

 

Variable-rate drive offers the following advantages over common, ground, or contact-tire drive systems: 

  • Rate changes are almost instantaneous; no ramp up or ramp down of system as in some competitive systems
  • Permits the producer to match seed population based on different soil types or irrigation practices
  • John Deere design provides added operator safety by eliminating any possible drive creep found in some competitive variable-rate drive systems
1755 equipped with variable-rate drive1755 equipped with variable-rate drive
1765NT equipped with variable-rate drive1765NT equipped with variable-rate drive

Single- or dual-motor systems for variable-rate drives are available for all John Deere planters except the 1785 Rigid Frame. Variable-rate drive is available as a factory-installed option for all applicable planter models.

Single- or dual-motor systems are available as field-installed attachments for most planter models; however, a three-motor variable-rate drive field-installed attachment is not available.

Seed variable-rate drive requires the SeedStar™ monitor and a radar input signal. Either tractor or planter radar may be used. Planter radar is ordered separately.

 

NOTE: Peanut seed meter disks require the variable-drive transmission.

VRD shown on a 1775NTVRD shown on a 1775NT

The seed variable-rate drive provides the ultimate planting productivity by utilizing one, two or three hydraulic motors (varies by model) to turn the seeding drive shaft. Hydraulic control of the seeding drive allows for on-the-go seeding rate changes right from the display mounted inside the tractor cab. 

 

Combine this seeding flexibility with the map-based planting option, and seeding rates adjust automatically based on a prescription map.

 

Single- or dual-motor systems for variable-rate drives are available for all John Deere planters except the 1785 Rigid Frame. Dual- or three-motor drive systems are commonly used on larger (12-row and more) planters and offer the capability of half-width or three-section drive disconnect.

 

The VRD is available as a factory-installed option for all applicable planter models. Single- or dual-motor systems are available as field-installed attachments for most planter models; however, a three-motor VRD field-installed attachment is not available.

 

The seed VRD requires the SeedStar™ monitor and a radar input signal. Either tractor or planter radar may be used. Planter radar is ordered separately.

VRD offers the following advantages over common, contact-tire drive systems: 

  • Almost instantaneous rate changes – there is no ramp up or ramp down of system as in some competitive systems
  • Permits the operator to match seed population based on different soil types or irrigation practices
  • John Deere design that provides added operator safety by eliminating any possible drive creep found in some competitive variable rate drive systems
Half-width drive disconnect

The half-width drive disconnect feature is excellent for the producer concerned with controlling seed costs. This feature helps the operator place seed in the desired area and limit the amount of costly overlapped planting. 

 

The half-width drive disconnect allows the operator to turn off half of the planter at a time for planting end rows, point rows, etc. Variable-rate-equipped planters require two drive motors to utilize the half-width disconnect feature. 

Half-width drive disconnect within frame controlHalf-width drive disconnect within frame control

With a 1765, 1765NT, and 1775 12-Row Planter, a single switch box is required for planters that are ordered with variable rate drive and half-width disconnect.

 

For the 1775NT, 1775NT Central Commodity System (CCS™), and 1795 Front-Folding Planters, the half-width drive disconnect switch is contained within the frame control box, conveniently located in the tractor cab. The function easily shuts off the drive for the left or right half of the planter row-unit seed meters.

Three-width drive disconnect
Three-width drive disconnect controlThree-width drive disconnect control

Three-width drive disconnect is an option on 1725 12-Row Planters and is base equipment on the 1725 16Row30 Planter. This feature is activated by three individual console mounted switches (control box), conveniently located in the tractor cab. The function easily shuts off the planter row-unit seed meters by one-, two-, or three-drive segments independently.

Granular fertilizer hopper and transmission
Granular fertilizer hopper and openerGranular fertilizer hopper and opener

Granular fertilizer is available for 1755, 1775, and 1785 Planters. Fertilizer hoppers/tanks and selected other equipment may not be installed to facilitate shipping. Fertilizer attachments place fertilizer only on 76.2-cm, 91.4-cm, or 96.5-cm (30-in., 36-in., or 38-in.) spacings. Some planter frame and row spacing combinations result in the opener offset 10.1 cm to 15.2 cm (4 in. to 6 in.) from the centerline of the Tru-Vee opener.

 

Hoppers hold approximately 249.5 kg (550 lb) of fertilizer for longer operating time between fill-ups. One hopper feeds two rows. Hopper lids provide a large opening for fast filling with less spillage. Hoppers pivot for easy dumping and cleaning. 

 

The transmission (two on 1775) has 24 sprocket combinations in consistent 6 percent increments to allow operators to apply fertilizer at the desired application rate. Depending on which auger is selected, a wide range of fertilizer rates can applied from 52.7 kg/ha (47 lb/acre) to 803.7 kg/ha (717 lb/acre). It requires openers or a surface application bracket.

Augers for granular fertilizer system

Low-, regular-, or high-rate feed augers are required to complete the granular fertilizer system. Augers move fertilizer from the fertilizer boxes to the opener. Regular- or high-rate augers are matched with the opener style selected and are available as a factory-installed option or as an attachment for field conversion. Low-rate augers are only available as an attachment for field conversion.

 

For 76.2-cm (30-in.) rows, the approximate rate of application is as follows:

 

For 96.5-cm (38-in.) rows, the approximate rate of application is as follows:

  • Low-rate augers – 41.5-208.5 kg/ha (37-186 lb/acre)
  • Regular-rate augers – 82.9-418.1 kg/ha (74-373 lb/acre)
  • High-rate augers – 124.4-626.6 kg/ha (111-559 lb/acre)

 

NOTE: Weight metered may vary from that indicated because the fertilizer attachment will meter by volume not by weight and because of differences in fertilizer density.

1770 granular fertilizer openers

Frame-mounted, single-disk fertilizer openers with cast spout are utilized on the 1775 12Row30 Planter. These openers are ideal for both conventional and no-till. The openers are adjustable to place the fertilizer in the soil next to the seed furrow for ideal nutrient placement and maximum plant uptake. A single gauge wheel allows the opener to follow the contour of the ground for ideal fertilizer depth placement. Single-disk fertilizer openers are compatible with frame-mounted coulters.

1755 and 1785 granular fertilizer openers
Granular fertilizer openerGranular fertilizer opener

Frame-mounted, double-disk openers and frame-mounted, single-disk openers for granular fertilizer are available on the 1755 and 1785 Planters. The frame-mounted, single-disk opener is available with a regular spout or cast spout. Fertilizer openers place the granular fertilizer into the soil for maximum plant uptake and are adjustable. Single-disk fertilizer openers are required for no-till, but are also suitable for conventional and reduced tillage. Double-disk fertilizer openers should only be used in conventional and reduced tillage conditions. 

  • Single- and double-disk openers are compatible with frame-mounted coulters.
  • Single-disk opener with cast spout is recommended for all soil conditions because it keeps soil from flowing into the furrow before fertilizer is delivered.
  • The gauge wheel on single-disk openers will help gauge fertilizer application depth and minimize soil disruption.
  • On 1755 8Row30 Planters, due to frame limitations, the granular fertilizer systems with single-disk openers can place fertilizer no closer than 12.7 cm to 15.2 cm (5 in. to 6 in.) to the seed furrow on rows 4 and 5.
1765NT tire contact drive system1765NT tire contact drive system

The tire contact drive for mechanical seed transmissions is a great fit for the mid-to-large planter operator concerned with quick transport capabilities, lower maintenance, and positive seed meter drives. The tire contact drive system is a simple, reliable, and efficient way to power seed transmission and meters.

 

The tire contact system drives the seed transmission mounted above the inner planter ground drive tire. A turf tire engages the ground drive tire when the planter is lowered, automatically turning the seed transmission and seed meters. Automatic drive disconnect occurs when the planter is raised and the turf tire separates from the ground-engaging tire. The system eliminates clutches, countershafts, and manual transport disconnects needed on direct ground drive systems. Drive chains and sprockets are moved up and out of the soil and residue zone for excellent reliability.

Tire contact drive systems are base equipment on the 1765, 1765NT, 1775 12-Row, and 1785 Planters. Contact between the ground-engaging tire and seed transmission tire is positive. On all models mentioned, a spring set applies downforce of the turf tire assembly onto the ground-engaging tire. System slippage is also minimized because the planter drive tires track in the tractor tire tracks. Frame designs differ (such as tire width) and the following different downforce requirements exist:

  • 1765 8-Row drives have 207.3 kg (457 lb) of downforce.
  • 1765 and 1775 12-Row drives have 254 kg (560 lb) of downforce. 

The 1765 model uses one rear-mounted seed transmission. However, if the planter also has the fertilizer option, there is another rear-mounted transmission for the fertilizer drive. The 1785 Rigid Planters utilize one front-mounted seed transmission and if the planter is equipped with the liquid fertilizer option, another front-mounted transmission is utilized. The 1775 12-Row Planter utilizes two rear-mounted seed transmissions. Another rear-mounted transmission is used if the planter has the fertilizer option.

Specifications


Rows and Row Spacing 1775-flex-planter
Current Model
Number of rows12
Row spacing30 in.
76 cm
Frame
Fold configurationFront-fold
Frame tube size17.8 x 17.8 cm
7 x 7 in.
Fold-and-go from tractor cabManual wing lock pin
Flexibility2-section flex frame, 20 degrees up, 30 degrees down
Hitch
BaseTwo point hitch for Cat.II or Cat.III with Quick Coupler only
OptionalNA
Rear hitchNA
Lift System
TypeWheel module
Number of cylinders8
Tires
Base9.5L x 15 in. F1 load range D
OptionalNA
Quantity8
Row Units
Type
Opener
Depth gauging(2) semi-pneumatic wheels - 4 1/2 x 16 in.
AdjustmentT-handle, 1/4 to 4 depth in 1/4 increments in.
Walking wheelsOptional
Row unit seed hoppersCapacity
0.06 or 0.11 m3
1.6 or 3.0 bu
Material
1.6 - polyethylene or 3.0 - roto-molded plastic bu
Row unit down forceNon-adjustable (4 springs)
180 lb
Adjustable heavy-duty
4 settings: 0, 125, 250, 400 lb
Pneumatic
Base, Infinitely adjustable to 400 lb
Base equipment
Scrapers, opener bladesPlastic rotary
NA
Steel straight blade
Optional
Heavy-duty
Optional
Optional
Seed tube sensors
Optional
Standard
Base
Seed Meters
BaseVacuum
OptionalPlateless
Finger pickupOptional
Radial bean meter
Central Commodity SystemSeed capacity
NA
NA
Drive System
BaseTire contact
Optional1 or 2 motor hydraulic variable rate drive
Number of drive wheels1 for seed transmission and 1 for dry fertilizer
Drive wheel disconnectAutomatic
Counter shaft7/8 hex in.
Drill shaft7/8 hex in.
Seed transmissionTire contact
Transmission combinations50 sprocket combinations
Markers
TypeTri-fold
ControlBase
Independent of lift
Optional
Connected to lift
Independent of lift or connected to lift
Marker diskBase
Notched w/depth gauging band - 16 in.
Optional
Marker arm gauge wheel
Shear bolt protectionBase equipment
Less marker optionOptional
Closing System
Rubber tire closing systemWheel
(2) rubber tires w/nylon wheel - 1 x 12 in.
Position
In-line or staggered
Adjustment
T-handle
Down force
5 position 0-145 lb
Alignment
Adjustable side to side
Base
Cast iron closing systemWheel
(2) cast iron wheel - 1 x 12 in.
Position
In-line or staggered
Adjustment
T-handle
Optional
Herbicide and Insecticide
Insecticide only hopperOptional -- capacity, 70 lb
Herbicide only hopperNA
Insecticide and herbicide hopperOptional -- split hopper, each side - 35 lb
Liquid Insecticide System
System availableNA
Tank capacityNA
Seed Monitor System
Base
Optional
Tillage Attachments
Unit-mounted coulterOptional
Frame-mounted coulterOptional
Bubble bladeOptional
.63-in. fluted blade (25 flutes)
.7-in. fluted blade (13 flutes)
1-in. fluted blade (8 flutes)
Row tillage support hangerOptional
Tine tooth
Cons. furrower w/ leading cutout blade
V-wing bed sweepsNA
Row cleaner
Row cleaner - unit-mounted coulter
Row cleaner - unit-mounted DD fert. openerOptional
Fertilizer
Onboard / towed / tractor tanksNA
Tank capacityNA
Fixed-rate applicationNA
Variable-rate applicationNA
Pump typeNA
Pump rateNA
Fertilizer opener typeFrame-mounted
NA
Unit-mounted
NA
Flow divider distribution systemNA
Pressure manifold distribution systemNA
Dry fertilizerNumber of hoppers
6
Hopper capacity
550 lb
Base equipment
Dimensions
Transport width (with markers)15, 2 ft, in.
Transport width (without markers)
Transport length29, 6 ft, in.
Transport height3.4 m
11.25 ft, in.
Transport weight11900 lb
Transport underframe clearance
Field operation width
Field operation length
Ag Management Solutions
Map-based seedingOptional
Field documentationOptional
Parallel trackingOptional
Additional Information
Recommended tractor horsepower120 - less fertilizer, 140 - w/fertilizer hp
Recommended tractor hydraulics15514 maximum kPa
2250 maximum psi
Warranty length1 year
Date collected
Key Specs
Frame - Flexibility
Frame - Fold configuration
Number of rows
Row spacing
Row unit seed hoppers
Seed Meters

Accessories and Attachments

Down Force

Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforceNon-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TRDual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springsAdjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.
Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforceNon-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TRDual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springsAdjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.
Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforceNon-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TRDual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springsAdjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.

Drive System

Half-width drive disconnectHalf-width drive disconnect
#

 

To add half-width row-unit drive disconnect to a planter, order the following attachment.

 

Allows shutting off half of the planter when planting point rows, headlands, etc., so as not to plant double seed.

 

NOTE: When added to these planters that have SeedStar™ monitor, BA30921 frame control box is required. This box has the switch to activate the half-width disconnect system.

For MY2009 planters and earlier, a frame/lighting harness needs to be ordered. All planters MY2009 and newer should already have this harness installed. The model-specific harnesses are as follows:

  • 1760NT 8R30—Harness part number AA68458
  • 1760 Rigid and Flex 12R30—Harness part number AA68458
  • 1770 Flex 12R30—Harness part number AA68457

 

Also, for SeedStar use, the following model-specific harnesses need to be ordered:

  • 1760NT 8R30—Harness part number AA68456
  • 1760 Rigid and Flex 12R30—Harness part number AA68455
  • 1770 Flex 12R30—Harness part number AA68454

 

The following parts need to be ordered to make BA30922 compatible for the 1760 Planter with ComputerTrak™ monitor: 

 

Part number

Part description

Quantity

AA27307

Maintained rocker switch

1

AA39225

Wiring harness

1

AA61336

Switch button label

1

A40319

Switch housing

1

A40320

Switch housing cover

1

A53990

Two switch console plate

1

R54388

Special machine screw

2

14M7139

Hex nut

2

19M8078

M4 x 16 hex head bolt

2

37H95

Self-tapping screw

4

AA48367

Wiring harness with plug

1

A32904

Harness dust cap

1

Herbicide And Insecticide

Rear-mount insecticide bracketRear-mount insecticide bracket

Rear-mount bracket permits mounting insecticide band spreader behind closing wheels when only insecticide is used.

NOTES: Bracket is also available through Service Parts. Not compatible with seed packer wheel attachment or disk closing system.

Meter Drive

RowCommand controls seed output
RowCommand for chain driveRowCommand for chain drive

Controlling input costs and improving productivity are key producer requirements today. RowCommand is an effective, integrated John Deere solution designed to meet these intensifying needs.

 

The RowCommand system manages seed output, reduces yield drag and improves harvest capabilities on select chain-driven MaxEmerge™ XP planters.

 

NOTE: Chain-drive RowCommand is only compatible with planters equipped with pneumatic downforce systems. On planters equipped with the heavy-duty downforce springs, potential chain interference may result and is not recommended.

 

NOTE: Chain-drive RowCommand requires some modification to brackets in order to function with corn finger pickup meters. Information on the modifications needed is found in the following sales material.

 

RowCommand controls seed output by incorporating individual, low-amperage clutches inside the chain-drive gearbox. Clutches are completely enclosed within the gearbox housing to protect them from the elements and harsh operating conditions.  

 

When power is supplied, either manually or through the Swath Control Pro™ solution, clutches disengage the seed meters and the seed flow stops. Controlling seed output at individual rows reduces overplanting in point rows and maximizes seed placement when entering/exiting headlands.

Planter compatibility

RowCommand is available as an attachment for field conversion (AFC) for the following chain-drive planter models equipped with pneumatic downforce systems.

 

Planter model Row configuration
 1720   12-row narrow, 12-row wide, and 16-row narrow 
 1760 12-row narrow
 1770 12-row narrow
 1770NT 12-row, 16-row, and 24-row narrow
 1770NT Central Commodity System (CCS™)                         12-row, 16-row, and 24-row narrow
 DB44 24Row22

 

RowCommand is also compatible and designed to fit on those model year 2003 to 2008 (serial number range 700101 - 729999) planter models listed above that do not have controller area network (CAN) based frame control or CAN-based half-width disconnect. For model year 2008 and earlier planters (serial number -729999 and below), the correct AFC bundle along with additional components (planter mainframe monitoring harness, SeedStar™ 2 controller, and CAN adapter harness) are required for RowCommand operation. 

 

For all RowCommand eligible planters equipped with a mechanical transmission, a height sensor is required in order for RowCommand functionality.

Chain-drive RowCommand and heavy-duty downforce
Chain interference with heavy-duty downforceChain interference with heavy-duty downforce

As seen in the above image, chain interference may result when operating chain-drive RowCommand on planters equipped with short- and long- parallel arms and heavy-duty downforce springs.

 

NOTE: Chain-drive RowCommand is only compatible with planters equipped with pneumatic downforce systems. On planters equipped with the heavy-duty downforce springs, potential chain interference may result and is not recommended.

Chain-drive RowCommand with corn finger pickup meters
Bracket material removalBracket material removal

Due to the design characteristics of the chain drive RowCommand clutch, some modification to the corn finger pickup meter drive bracket is required. As seen in the picture to the left, some material needs to be removed from the front of the meter drive bracket in order for the chain drive RowCommand clutch to have sufficient space for installation.

 

NOTE: Chain-drive RowCommand requires some modification to brackets in order to function with corn finger pickup meters.

System requirements

By design, power is only supplied to the clutch when a signal is received to stop planting. In a normal planting condition no power is supplied and the clutch is de-energized. 

 

Power for the RowCommand system is provided from the nine-pin ISO implement connector. All late-model 8X00 and 9X00 Series John Deere Tractors equipped with the nine-pin ISO implement connector are capable of supplying ample power for system operation. 

 

Along with ample system power, a GreenStar™ 2 display and SeedStar 2 monitoring is required for operation and control interface. The GreenStar 2 display is where system setup, control settings, and manual control functions are performed. 

RowCommand controls seed output
RowCommand on a Pro-Series™ row-unitRowCommand on a Pro-Series™ row-unit

Controlling input costs and improving productivity are key producer requirements today. RowCommand is an effective, integrated John Deere solution designed to meet these intensifying needs. The RowCommand system manages seed output, reduces yield drag and improves harvest capabilities on all Pro-Shaft driven row-units—on both Pro-Series XP and MaxEmerge™ XP planter.

 

RowCommand controls seed output by incorporating individual, low-amperage clutches inside the Pro-Shaft drive gearbox. Clutches are completely enclosed within the gearbox housing to protect them from the elements and harsh operating conditions.

 

When power is supplied, either manually or through John Deere Section Control, clutches disengage the seed meters and the seed flow stops. Controlling seed output at individual rows reduces overplanting in point rows and maximizes seed placement when entering/exiting headlands.

Planter models and compatibility

RowCommand is available as a factory-installed option or as an attachment for field conversion (AFC) attachment. The RowCommand system is designed for the entire list of planter models as follows.

 

NOTE: Factory installation of RowCommand will replace one-half or one-third width disconnect clutch components on the planter drive.

 

Planter model Row configuration
 1725 12Row narrow, 12Row wide, and 16Row narrow 
 1725 Central Commodity System (CCS™) 16Row narrow, 12x2 TR
 1765 12Row narrow
 1775 12Row narrow
 1775NT 12Row, 16Row, and 24Row narrow
 1775NT CCS 12Row, 16Row, and 24Row narrow
 1795 12/23Row, 12/24Row and 16/31Row, 16/32Row
 1795 24Row20
 DB 44 24Row22
 DB 58 32Row22
 DB 60 36Row20 or 47Row15
 DB 66 36Row22
 DB 80 32Row30 or 48Row20
 DB 88 48Row22
 DB 90 36Row30
 DB 120 48Row30
 DR 16R40 16Row40
 DR 18R38 18Row38
Compatibility

RowCommand is also compatible and designed to fit on model year 2003 to 2008 (serial number range 700101 - 729999) planter models listed above that do not have controller area network (CAN) based frame control or CAN-based half-width disconnect. For model year 2008 and earlier planters (serial number -729999 and below), the correct AFC bundle attachment along with additional components (planter mainframe monitoring harness, SeedStar™ 2 or SeedStar XP controller, CAN adapter harness) are required for RowCommand operation.

 

For all RowCommand eligible planters equipped with a mechanical transmission, a height sensor is required in order for RowCommand functionality.

 

NOTE: RowCommand is compatible on MaxEmerge XP row-units with vacuum and corn-finger pickup meters. However, for Pro-Series XP row-units, RowCommand is compatible on vacuum meters only and is not compatible on corn-finger pickup meters. There is a select group of planters that might have Pro-Series XP row-units with corn-finger pickup meters in which RowCommand will not be compatible.

System requirements

RowCommand is a simple and efficient means to control individual row planting through the use of low-voltage electric clutches. Each clutch, when activated, consumes no more than 0.5 amp. 

 

By design, power is only supplied to the clutch when a signal is received to stop planting. In a normal planting condition no power is supplied and the clutch is de-energized. 

 

Power for the RowCommand system is provided from the nine-pin ISO implement connector. All late-model 8X00 and 9X00 Series John Deere Tractors equipped with the nine-pin ISO implement connector are capable of supplying ample power for system operation. 

 

Along with ample system power, a GreenStar™ 2 Display and SeedStar 2 or SeedStar XP monitoring is required for operation and control interface. The GreenStar 2 Display is where system setup, control settings, and manual control functions are performed. 

These items can be ordered to convert planter from plate or plateless meters to vacuum meter system.

  • Vacuum pump and manifold system
  • Vacuum manifold automatic disconnect (for flex-fold planters)
  • Seed hoppers, lids, and drive
  • Vacuum seed meter disk
  • Vacuum meter assemblies
NOTE: Order seed metering disks from ''Attachments'' section. BA26722 vacuum level sensor recommended if planter is equipped with SeedStarTM  monitoring system.

Miscellaneous

Active pneumatic compressor assemblyActive pneumatic compressor assembly
Hydraulic motorHydraulic motor

John Deere active pneumatic downforce makes getting the planting accuracy desired even easier. A hydraulically driven compressor works with the SeedStar™ 3 HP system and SeedStar XP system to automate downforce control. Just set the row-unit target margin value and the active pneumatic downforce system works automatically to make sure the planter maintains this value-achieving precise soil penetration, and consistent planting depth without sidewall soil compaction. This frees the operator from constantly making manual downforce adjustments as conditions change. It also allows the operator to focus on all the other planting factors that drive up yields, like seed singulation and spacing.

 

This system also offers a split rank control feature for split-row planters. On top of actively controlling the pneumatic downforce system across the planter, John Deere active downforce will control the front and rear rows of split-row planter independently. This compensates for differing downforce requirements between the ranks and will help maintain an accurate planting depth and consistent margin across all the rows.

Single-rank planters such as the 1770NT, 1790 24Row20, and Deere Bauer Planters except for the DB60 47Row15 require a compressor assembly and hydraulic hose kit to complete the field conversion. The 1790 and DB60 47Row15 Split-Row Planters require the compressor with split rank control, hydraulic hose kit, and the PDF hose kit for split rank control. Additional components maybe needed depending on model year.

Drag closing systemDrag closing system

Designed to improve seed emergence in particularly difficult soil conditions that severely bake and crust after planting. These conditions are found primarily in irrigated cotton planting areas of the southwestern United States.

 

A seed packer wheel precedes the drag and pushes seed down into the moist soil. Drag brings loose soil into seed furrow without compaction. Without the typical closing compaction, the covering soil acts like a mulch, reducing the tendency to crust for improved seed emergence.

 

Only for use in fields that are relatively level and free of residue and clods that could cause plugging.

 

NOTE: Not compatible with leveling chains, tine tooth incorporators, rear-mounted granular insecticide or herbicide attachments, seed packer wheel or insecticide diffusers.

Cast-iron closing wheel systemCast-iron closing wheel system

To convert planters equipped with rubber-tire closing wheels to cast-iron closing wheels.

 

May be used where rubber-tire closing wheels do not adequately close seed trench.

 

For individual cast wheels only, order AA34350 from Service Parts.

 

NOTE: Cast-iron closing wheels are not recommended in conventional tilled ground.

Rubber tire closing system
Rubber tire closing systemRubber tire closing system
#

Rubber tire wheels are recommended for most conventional, minimum-till, and no-till planting conditions. Multiple levels of spring force are available, and are easily set with the integrated T-handle adjustment.

Cast iron closing wheels
Cast-closing wheelsCast-closing wheels
#

Cast-iron wheels are recommended for use in tough soil conditions where additional closing force is required.

Disk closing system
Disk closing systemDisk closing system
#

The disk closing system is recommended for very shallow planting depths. Two small disks are used to gently firm soil around the seed. These disks are followed by a wide packer wheel to gently pack the soil surface. This system is not recommended for use in high residue applications.

Rubber-tire closing wheelRubber-tire closing wheel

Converts planters equipped with cast-iron closing wheels to rubber-tire closing wheels.

 

Used in all types of planting conditions.

 

For individual rubber-tire closing wheels only, order AA39968 from Service Parts.

 

Limited by their ability to close seed trench in extreme soil conditions.

 

NOTE: For wheels only, order AA39968 from Parts.

Furrowers with solid or notched leading bladeFurrowers with solid or notched leading blade

Used in tilled soil to move dry soil away from the planting unit path to plant in moist soil.

 

NOTE: Cannot be used on row spacing of less than 30 in.

 

Furrowers are used in conservation tillage conditions to sweep trash and a small volume of soil to the sides to clear a path for the planting unit.

 

Furrowers have alternating right and left-hand leading blade to assure straight planter draft.

 

Effectiveness of furrowers is limited by the trash-cutting ability of the attachment.

 

Available with two 13-in. solid blades or with a notched blade in the leading position. Leading notched blade provides improved cutting action.

 

The blade mounting bracket is adjustable to change the contact angle for improved sweeping action.

 

Depth is easily adjustable. Convenient pointer and scale give easy-to-read reference point.

 

Furrowers are not compatible with unit or frame-mounted coulters.

 

Drive chain shields are required when using conservation disk furrower with planters that have drive/gauge wheels mounted to the rear. (Not required on 1760, 1770 12Row30 or 1780 Planters.)

Upforce / Downforce spring systems

Planter row-unit downforce is an important factor to ensure consistent and proper depth control. Downforce systems are used to keep the planting units from bouncing on rough seedbeds and to improve planter penetration in heavy residue and harder soil conditions. The amount of downforce required is determined by how the planter is equipped and the field conditions in which the planter is used.

 

Non-adjustable springs can also be used to apply upforce on the row-units. Upforce can be achieved by changing the orientation of the spring on the parallel arms. This upforce can be used to counteract excess

row-unit margin or extra weight cause by seed, tillage, or other attachments on the row-unit. Upforce springs will limit the maximum amount of downforce that can be place on a row-unit by the downforce system and should only be used in conditions were adequate and consistent depth control is easily maintained.

 

Non-adjustable springs in the upforce or downforce position can also be used to counteract variances in row to row. When used in conjunction with the pneumatic downforce system, non-adjustable springs can be used to provide a more consistent row-unit margin on each row by compensating for inconsistencies such as tire tracks, different row-unit tillage attachments, and other various attachments.

Non-adjustable springs
Non-adjustable springs, row-unit upforceNon-adjustable springs, row-unit upforce

A single set of springs apply approximately 90 lb of upforce / downforce per row. Two sets of springs can be used for 180 lb of force per row.

Non-adjustable downforce springs are recommended for use in conventional tilled soil for planting speeds over 5 mph and/or in rough-tilled seedbed conditions. Non-adjustable springs can be used with tillage attachments in lighter, conventional tilled soils. (Not recommended for use with unit- or frame-mounted coulter.)

Dual upforce springs 1700 TRDual upforce springs 1700 TR
Adjustable heavy-duty springs
Adjustable, heavy-duty downforce springsAdjustable, heavy-duty downforce springs

Adjustable, heavy-duty downforce can be used to apply 0 lb to 400 lb of downforce per row and has four settings: 0 lb, 125 lb, 250 lb, and 400 lb. The adjustable, heavy-duty downforce system can be used in all planting conditions and is compatible with all tillage attachments (recommended with unit-mounted coulter, row cleaners, and unit-mounted double-disk fertilizer openers in conservation planting conditions).

NOTE: Compatible with all MaxEmerge™ Plus  planters. Vacuum planters built prior to June 1992 require updated manifold brackets (A52970) to eliminate adjustment interference.
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Floating row cleanerFloating row cleaner
Floating row cleaner side viewFloating row cleaner side view

When paired with a unit-mounted coulter, the floating combo row cleaner offers the ultimate solution for managing tough residue and soil conditions. The row cleaner clears the way of debris, and the coulter penetrates tough soil, opening the furrow for the row unit opener blades. The floating ability of the row cleaner allows the unit to adapt to varying terrain independently of the row unit.

Features

The floating row cleaner allows a row cleaner to be used in conjunction with a unit-mounted coulter.This combination is often desired in heavy residue loads and tough reduced tillage planting conditions. The floating row cleaner features the SharkTooth® wheel. The beveled, sharpened edge of the teeth on the SharkTooth aggressively cuts flat and standing residue in the path of the row unit. The curved tooth design sweeps a clear path for the unit mounted coulter and opener blades, and resists residue buildup.

 

When used with the unit mounted coulter, the wheels are run side-by-side. They may be operated with one wheel forward if desired, by simply relocating the wheels to existing holes on the row cleaner bracket. The wheel bearings of the floating row cleaner are sealed and require no regular maintenance.

 

Cast aluminum depth gauge bands are standard equipment on the floating row cleaner. These durable bands are mounted directly to the row cleaner wheel, and aid the row cleaner in maintaining a consistent operating depth over varying terrain. The depth gauge bands also add weight to the row cleaner, aiding penetration in tough conditions. The depth gauge bands may be removed if desired.

Adjustability

The floating row cleaner is designed with maximum terrain following flexibility in mind. The pin adjustment has multiple settings available in 6.4-mm (1/4-in.) increments. The primary method of operating is to limit the maximum depth of operation, and allow the row cleaner to float up when necessary. This is accomplished by placing the adjustment pin below the floating bracket, limiting downward travel, but permitting upward travel. 

 

It is also possible to set the row unit in a manner allowing full float. Simply place the pin in the lowest setting, allowing the depth gauge bands to determine the operating depth up and down. In some conditions, it may be desirable to pin the unit in a fixed position. This may be accomplished by simply pinning through the floating arm, fixing the row cleaner arm to the row unit and allowing the row unit to control operating depth.

Operational notes

NOTES:

  • Not compatible with any row spacing less than 76.2 cm (30 in.), except the 1790 Split-Row Planter.
  • Not compatible with Deere/Bauer or Deere/Orthman planters.
  • Drive wheel chain shields are recommended for use with row cleaner attachments.
  • Long parallel arms are required for use on:
    • 1750
    • 1760NT
    • 1770NT when used in conjunction with frame mounted fertilizer openers
    • 1790 front rank when used with frame mounted fertilizer openers
    • 1790 rear rank
  • For available long parallel arm attachments for field conversion, please click here.
  • Use of long parallel arms is recommended, but not required, when using the floating row cleaner on 1770 Flex Planters in conjunction with frame-mounted fertilizer openers. Use of long parallel arms on these machines will maximize the distance between the fertilizer openers and the row cleaner, preventing interference and maximizing residue flow.
  • Other row cleaner designs are available for use without a unit mounted coulter, or for use with unit-mounted double disk fertilizer openers.
  • Use of row cleaners and unit-mounted coulters is not recommended when surface application pre-plant herbicide is used prior to planting. when using pre-plant incorporated herbicide, the row cleaner should be adjusted to minimize soil disturbance so as not to reduce the effectiveness of the incorporated herbicide.

 

SharkTooth is a trademark of Yetter Manufacturing, Inc.

Tine tooth incorporatorTine tooth incorporator

Designed to offer full flexibility to follow ground contours and effectively mix soil and chemicals. Also levels soil and leaves it loose to further reduce the chance for crusting or erosion.

Tooth angle and penetration are easily adjusted for more or less aggressive action depending on the soil texture.

NOTE: Not compatible with disk closing system or seed packer wheel attachment.

Low-, regular-, and high-rate feed augers are available to meter fertilizer in the quantity required.

 

For 76.2-cm (30-in.) rows, the approximate rate of application is as follows:

 

 Low-rate augers Regular-rate augers  High-rate augers  
 52.7 to 269 kg/ha (47 to 240 lb/acre) 105.4 to 533.5 kg/ha (94 to 476 lb/acre) 183.8 to 803.7 kg/ha (164 to 717 lb/acre)

  

For 101.6 (40-in.) rows, the approximate rate of application is as follows:

 

 Low-rate augers Regular-rate augers  High-rate augers  
 41.5 to 208.5 kg/ha (37 to 186 lb/acre) 82.9 to 418.1 kg/ha (74 to 373 lb/acre) 124.4 to 626.6 kg/ha (111 to 559 lb/acre)

 

NOTES:

  1. Larger amounts will be applied to narrower row spacings and smaller amounts will be applied to wider row spacings. 
  2. Weight metered may vary from that indicated because the fertilizer attachment will meter by volume, not by weight, and because of differences in fertilizer. 
  3. Multiples of the augers are required for 8-row, 12-row, and 16-row applications.
Dry fertilizer attachment Dry fertilizer attachment

Hoppers hold approximately 550 lb of fertilizer for longer operating time between fill-ups.

 

Hopper lids provide large opening for fast filling with less spillage.

 

Hoppers pivot for easy dumping and cleaning.

 

Transmission (two on front-fold model) has 24 sprocket combinations in consistent 6 percent increments to allow applying fertilizer at the desired application rate.

 

Includes hoppers, transmissions, and drives. Requires augers and openers or surface application brackets.

NOTES:

  1. Warning and tail lamps recommended for planter since fertilizer attachment could obscure tractor tail and/or warning lights. 
  2. 1780 fertilizer placement on 30-in. row spacing only. 
  3. BA91309 can also be used on an 11-row planter; only six rows will fertilize. 6-row wide requires one A47389 coupler and one A47400 coupler from Parts.
  4. When adding to a planter with variable rate drive (VRD), additional drive components for the fertilizer attachments will need to be ordered through parts.
Dry fertilizer attachment Dry fertilizer attachment

Hoppers hold approximately 550 lb of fertilizer for longer operating time between fill-ups.

 

Hopper lids provide large opening for fast filling with less spillage.

 

Hoppers pivot for easy dumping and cleaning.

 

Transmission (two on front-fold model) has 24 sprocket combinations in consistent 6 percent increments to allow applying fertilizer at the desired application rate.

 

Includes hoppers, transmissions, and drives. Requires augers and openers or surface application brackets.

NOTES:

  1. Warning and tail lamps recommended for planter since fertilizer attachment could obscure tractor tail and/or warning lights. 
  2. 1780 fertilizer placement on 30-in. row spacing only. 
  3. BA91309 can also be used on an 11-row planter; only six rows will fertilize. 6-row wide requires one A47389 coupler and one A47400 coupler from Parts.
  4. When adding to a planter with variable rate drive (VRD), additional drive components for the fertilizer attachments will need to be ordered through parts.
17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed17.8-cm x 17.8-cm (7-in. x 7-in.) single-disk opener installed
Double-disk opener assemblyDouble-disk opener assembly

Frame-mounted fertilizer openers are recommended for the following tillage conditions:

 

 

 Openers

Conventional 

Reduced 

 Moderate, no-till

 Moderate, double crop

 Single disk

 X

 X

 X

 X

 Double disk

 X

 X

 

 

 

Depending on the model, single-disk or double-disk frame-mounted fertilizer openers options are available to meet a wide range of operating conditions. The single-disk frame-mounted fertilizer opener is the most robust and versatile of the two frame-mounted options. 

 

There are two designs of frame-mounted single disk fertilizer openers available for planters today:

  • One design mounts to rigid frame or folding planters and utilizes a steel upper arm for secure mounting.  This style opener is shown in the right-hand picture above and has been available for a number of years.
  • The second design of frame-mounted single-disk openers is strictly for 17.8-cm x 17.8-cm (7-in. x 7-in.) frames and is for use on the 1775NT and 1795 Planters (excluding the 24Row20). This design incorporates a longer curved upper casting and is shown in the left-hand picture above.

Single-disk fertilizer openers feature a gauge wheel to:

  • Gauge fertilizer application depth
  • Minimize soil disruption

The frame-mounted, single-disk opener has the ability to be locked up in the raised position on 1795 Split-Row Planters. This eliminates excessive wear to the openers when planting soybeans with a 1795 and the openers are not utilized. There are two bundles required for updating 1795 Split-Row Planters. One bundle is used for the center frame section and the other bundle is for wing sections.

 

The frame-mounted, single-disk opener cannot be locked up in the raised position on 1775NT Planters due to frame tube and opener contact. The steel opener for rigid or folding planters (non-NT) can be raised somewhat by screwing up the spring assembly but cannot be completely raised from the soil.

 

NOTES:

  1. Single-disk openers on 8Row30 1755 frames are limited to placement of 7.6 cm to 15.2 cm (3 in. to 6 in.) off the row on rows 4 and 5.
  2. Single-disk opener is not recommended for loose, soft soil conditions unless equipped with cast spout.
  3. Single-disk opener has optional heavy-duty spring A50733 (Parts) if more down force is needed in tough no-till conditions.
  4. Double-disk opener is not compatible with frame-mounted coulter.

NOTE: Order number of opener bundles to match number of planter row units (i.e., 4Row 1755 Planter requires four BA91211 double-disk openers or two BA91212 single-disk openers).

Rear band spreader shown with windshieldRear band spreader shown with windshield

Includes granular insecticide (with components for seed furrow placement and front or rear band spreader capability) plus herbicide with rear-mounted spreader.

 

Insecticide can be placed ahead of closing wheels (in-furrow or banded) or behind closing wheels (banded).  Hopper, hopper divider, drive, and meters are included.

 

Windshield is available to decrease wind effect on distribution pattern (order separately).

Rear-mount spreaderRear-mount spreader

In order to add dry chemical (herbicide) capability to planters equipped with MaxEmerge™ row units, the installation of the dry chemical hopper, meter, drive chains, rear-mounted spreader, and related attachment hardware are needed.

 

As seen fully assembled in the picture to the left, the herbicide spreader is equipped with a series of baffles that distribute the dry granules on the ground in a band approximately 14 in. wide. Along with the spreader assembly, a windshield is available to decrease the effect wind has on distribution pattern (order BA25340 separately).

NOTE: Not compatible with the seed packer wheel attachment or disk closing system.
Seed furrow placementSeed furrow placement
Band spreader placementBand spreader placement

Includes hopper, meter and both seed furrow placement and front band spreader components.

 

Granular chemical meters have a meter wheel for applications of up to 8 oz. per 1000 ft of row. For higher application rates, order the fluted roller for the meter (A50863) from Parts.

 

When seed furrow placement is used, insecticide is placed in seed furrow with the seed ahead of closing

wheel.

 

When band spreader is used, insecticide is placed on ground in a band approximately 7-in. wide ahead or behind closing wheels.

 

Available with regular or closed-chemical hopper lids.

NOTES:
1. Using rear-mount bracket (Code 9450/BA24528) allows using band spreader behind closing wheels.
2. Not compatible with seed packer wheel attachment or disk closing system.
3. Not compatible with 3.0 bushel seed hoppers.
Rear-mount spreaderRear-mount spreader

In order to add dry chemical (herbicide) capability to planters equipped with MaxEmerge™ row units, the installation of the dry chemical hopper, meter, drive chains, rear-mounted spreader, and related attachment hardware are needed.

 

As seen fully assembled in the picture to the left, the herbicide spreader is equipped with a series of baffles that distribute the dry granules on the ground in a band approximately 14 in. wide. Along with the spreader assembly, a windshield is available to decrease the effect wind has on distribution pattern (order BA25340 separately).

NOTE: Not compatible with the seed packer wheel attachment or disk closing system.
Seed furrow placementSeed furrow placement
Band spreader placementBand spreader placement

Includes hopper, meter and both seed furrow placement and front band spreader components.

 

Granular chemical meters have a meter wheel for applications of up to 8 oz. per 1000 ft of row. For higher application rates, order the fluted roller for the meter (A50863) from Parts.

 

When seed furrow placement is used, insecticide is placed in seed furrow with the seed ahead of closing

wheel.

 

When band spreader is used, insecticide is placed on ground in a band approximately 7-in. wide ahead or behind closing wheels.

 

Available with regular or closed-chemical hopper lids.

NOTES:
1. Using rear-mount bracket (Code 9450/BA24528) allows using band spreader behind closing wheels.
2. Not compatible with seed packer wheel attachment or disk closing system.
3. Not compatible with 3.0 bushel seed hoppers.
Liquid herbicide pre-emerge spray attachmentLiquid herbicide pre-emerge spray attachment

Applies pre-emerge liquid herbicide behind planting units.

Lower parts of attachment pivot rearward to prevent damage from obstructions such as corn stalks. Easy vertical adjustment permits quick setting of spray band width. Adapters are included to allow using flood tip nozzles for extended coverage. Approximate spray widths are:

  • ''Even'' type spray tips are recommended for spraying in bands from 7 to 17 in. with the nozzle in the lower position (shown).
  • The support tube may be inverted, placing the nozzle in the ''up'' position. Coverage in this position is from 50 to 90 in. in width when using flood type spray tips. This type of coverage is not recommended for less than 1/2 gallon per minute flow.

Check valves, nozzle bodies, and quick-attach nozzle caps are included for changing tips fast and easy without the use of tools. Also, this attachment for field conversion includes the distribution manifolds and hoses.

 

This attachment for field conversion does not include nozzle tips and strainers; see SprayMaster™ sprayer parts and accessories. Also, this attachment for field conversion does not include but requires (customer-supplied) tractor-mounted controls, tanks, pump and filters.

To adapt 1730 and 1780 Rigid Planters liquid herbicide attachment for 15- through 20-in. row spacing applications. Contains manifold for up to eight rows and hose connector to pump.

 

Does not include manifold distribution parts for 1/4-in. hose and spray nozzles. Does not include any hose pump or control. Order hose through Parts.

Used to attach pre-emerge spray nozzles behind the planting units. Includes nozzle body but does not include the hoses or nozzle tips.

 

To adapt 1730 and 1780 Rigid Planters liquid herbicide attachment for 15- through 20-in. row spacing applications.

PTO-driven hydraulic vacuum pumpPTO-driven hydraulic vacuum pump

A PTO-driven hydraulic pump allows operators to use the vacuum seed meter system with open-center hydraulic tractors and/or a 540 rpm or 1000 rpm PTO.  The 540 rpm PTO system is compatible with 4Row through 9Row planters and provides 3.9 gpm at 80 percent of rated speed.  The 1000 rpm PTO system is compatible with 4Row through 15Row planters and provides 5.0 gpm at 80 percent of rated speed.  Both the 540 and 1000 rpm PTO pumps are for single vacuum motors only and inadequate for dual vacuum motors systems.

 

Flat seed disks such as edible bean and sweet corn require higher levels of vacuum.  These disks require a dual vacuum motor configuration on planters over 8 rows.  Neither the 540 or 1000 rpm PTO pump is adequate for flat seed disk operation.

 

9000 Codes include an oil cooler, except with 4-row planters with 540 rpm pump. When ordering PTO pump as a bundle, you must also order the oil cooler bundle, except with the 540 rpm PTO pump for 4-row applications.

Pneumatic downforce assemblyPneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assemblyIn-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Pneumatic downforce assemblyPneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assemblyIn-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Pneumatic downforce assemblyPneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assemblyIn-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Pneumatic downforce assemblyPneumatic downforce assembly

Improved pneumatic downforce systems are available as a factory-installed option on all planters and as a field conversion bundle for all MaxEmerge™ 5, MaxEmerge XP, MaxEmerge Plus, and MaxEmerge 2 planters. All pneumatic downforce field conversion bundles contain upgraded components to reflect pneumatic system upgrades for model year 2011.

 

Row-unit downforce is infinitely variable from 0 kg to 181.4 kg (0 lb to 400 lb). A gauge and/or display provides a reading as to how much downforce the system is providing. The downforce is constant at all times during operation.

 

On all model year 2011 and newer 1775NT, 1775NT Central Commodity System (CCS™), 1795, and DB Series Planters, the pneumatic downforce adjustment is displayed within the GreenStar™ 2 Display as base equipment. However, when converting a model year 2010 and older 1770NT, 1770NT CCS, 1790, and DB Series Planter, the air compressor assembly and gauge need to be mounted within the tractor cab, similar to factory-installed pneumatic downforce equipment configurations for that model year.

 

Each row-unit has a single air bag located between the parallel arms. The air bag is hooked in parallel so air can be added or released from all rows at once from one location. Split-row planters have the corn row-units and soybean rows plumbed separately, so the pressure can be removed from the bean rows when planting corn.

 

MaxEmerge 2 row-units with long parallel arms must have the arms changed to current production parallel arms. This ensures the correct hole pattern for pneumatic downforce. Refer to the attachment description to order the appropriate bundle for the frame size.

 

NOTE: Row-units with long parallel arms require A54544 spacer block if not so equipped (Service Parts).

In-cab compressor assemblyIn-cab compressor assembly

An air compressor, located either in the tractor cab or on the frame, pumps up the system. Integral planter models ordered with pneumatic downforce from the factory have in-cab mounting as base equipment. For drawn planter models, the air compressor assembly is mounted onto the planter frame for model year 2011. Prior to model year 2011, the 1775NT, 1775NT CCS, 1795, and DB Series Planters have the air compressor mounted within the tractor cab from the factory.

 

Valves located on the compressor allow bleed-off of the system. Interplant rows are shut off entirely when those rows are locked up.

 

Field conversion bundles have been established for upgrading pneumatic downforce systems. With the bundle structure, order the individual components for a pneumatic downforce system. There are individual bundles for the air compressor, the row-unit downforce assembly, and a hose kit.

 

Each planter requires one air-compressor bundle, a number of row-unit downforce assemblies equal to the number of rows on the planter, and a hose kit for each 12 rows being equipped with pneumatic downforce. There are four different row-unit downforce assembly attachments. The selection of the row-unit downforce assemblies is based on the type of meter drive (chain or Pro-Shaft™ drive) and type of parallel arms being utilized (regular or long) on the row-units.

Mounting bracket and adapter harnessMounting bracket and adapter harness

The planter radar is for SeedStarTM and ComputerTrakTM systems. The SeedStar and ComputerTrak 250, 350, and 450 monitor systems require radar.

Radial bean meterRadial bean meter

The radial bean meter is a mechanical meter to be used in conjunction with the finger pickup meter. Soybeans are the only crop compatible with the radial meter.

 

Those who are currently using the feed cup or competitive brush meters for soybeans and who desire improved spacing and population control should consider the radial meter.

 

A seed bowl mounts to the meter housing and rotates around the meter housing, singulating seeds for enhanced spacing.

 

The seed bowl clearance is adjusted in relationship to the meter housing as seed size is changed. Seeds, ranging from 2000 seeds per lb to 4500 seeds per lb, are planted with the one seed bowl.

 

Brushes mounted on the meter housing act as doubles eliminators and cleaners for the seed bowl.

 

Meter utilizes a sprocket-type wheel to better eliminate any beans being stuck in the seed bowl and to offer greater wear characteristics.

 

Meter component life is at least 650 acres per row, prior to wear appearing, for minimum maintenance.

 

NOTES:

  1. Radial bean meters require A58634 clip from Service Parts to install meters on 1997
    and earlier 3-bu fiberglass hoppers
  2. The radial bean meter is also available for MaxEmerge™ planters by ordering  AA45061  from Parts.
Radial bean meterRadial bean meter

The radial bean meter is a mechanical meter to be used in conjunction with the finger pickup meter. Soybeans are the only crop compatible with the radial meter.

 

Those who are currently using the feed cup or competitive brush meters for soybeans and who desire improved spacing and population control should consider the radial meter.

 

A seed bowl mounts to the meter housing and rotates around the meter housing, singulating seeds for enhanced spacing.

 

The seed bowl clearance is adjusted in relationship to the meter housing as seed size is changed. Seeds, ranging from 2000 seeds per lb to 4500 seeds per lb, are planted with the one seed bowl.

 

Brushes mounted on the meter housing act as doubles eliminators and cleaners for the seed bowl.

 

Meter utilizes a sprocket-type wheel to better eliminate any beans being stuck in the seed bowl and to offer greater wear characteristics.

 

Meter component life is at least 650 acres per row, prior to wear appearing, for minimum maintenance.

 

NOTES:

  1. Radial bean meters require A58634 clip from Service Parts to install meters on 1997
    and earlier 3-bu fiberglass hoppers
  2. The radial bean meter is also available for MaxEmerge™ planters by ordering  AA45061  from Parts.
Row tillage support bracketRow tillage support bracket

Includes pointer, scale, and large easy-to-use adjustment knob for convenient adjustment to desired working depth.

Required with tine tooth tillage, conservation furrower, and V-wing attachments when ordered as extra equipment.

 

NOTES:  

1) Not compatible with unit- or frame-mounted coulters or heavy-duty parallel arms. 

2) For MaxEmerge™ 2  planters built prior to June 1991, order A52092 cast lower parallel arm.

Heavy-duty scrapersHeavy-duty scrapers

Recommended for extremely sticky soils where even rotary scrapers have problems keeping Tru-VeeTM  disks clean.

Scraper blades are heat treated for added wear.

NOTE: Not compatible with any row-unit tillage attachments except conservation furrowers, unit-mounted coulter, and unit-mounted row cleaner.
Screw-adjust, unit-mounted row cleanerScrew-adjust, unit-mounted row cleaner
SharkTooth® wheelSharkTooth® wheel

The screw-adjust, unit-mounted row cleaner is mounted directly to the face plate of the row-unit, placing the ground-engaging components just in front of the row-unit opener blades and depth gauge wheels. This close proximity allows the gauge wheels to control the depth of the row cleaner as well as the row-unit. This compact design also allows greater compatibility with fertilizer openers and other planter attachments.

Features

The unit-mounted row cleaner features the SharkTooth® wheel. The beveled, sharpened edge of the teeth on the SharkTooth aggressively cut tough residue that lies in the path of the row-unit. The curved-tooth design sweeps a clear path for the openers and resists residue buildup. The wheels are arranged in a staggered fashion with one wheel leading the other, ensuring complete clearing of the row-unit path. The bearing on the SharkTooth wheel is sealed and requires no regular maintenance. Bearing shields are used between the wheel and the mount bracket to prevent residue wrapping and buildup around the bearing housing.
 

Adjustability

The unit-mounted row cleaner offers a convenient screw adjustment feature for changing the depth setting. The acme screw is enclosed within the structure of the mounting bracket, providing protection from the elements. The adjustment knob for the screw adjustment is accessible from the top of the parallel arms. The knob can be adjusted by hand or by using a socket. The adjustment is detented in 1.6-mm (1/16-in.) increments, allowing for quick, easily repeatable adjustments across all rows of the planter. An indicator rod and scale on the front of the row cleaner bracket indicate the current setting. If a condition is encountered where use of the row cleaner is not desired, it can be set so that the wheels do not engage the soil surface.

Operational notes and compatibility

Use of row cleaners is not recommended when surface application pre-plant herbicide is used prior to planting. When using pre-plant incorporated herbicide, the row cleaner should be adjusted to minimize soil disturbance so as not to reduce the effectiveness of the incorporated herbicide.

 

Drive chain shields are recommended for use with row cleaner attachments.

 

NOTES:

  • Not compatible with use of frame-mounted coulter.
  • Not compatible with any row spacing less than 76.2 cm (30 in.).
  • For 1790 12/23, 12/24, 16/31, and 16/32 row machines, unit-mounted row cleaners recommended provided on the front rank of row units only.
  • For DB60 47R15 machines, unit-mounted row cleaners are recommended on the 24 row units with short parallel arms only.
  • Other row cleaner designs are available for compatibility with unit-mounted coulters and row unit-mounted double-disk fertilizer openers.
  • Bundle is not compatible with long parallel arms. If purchasing for use on a long parallel arm machine, a separate bracket must be ordered from Service Parts.
  • Drive wheel chain shields are not required on 1760, 1770 12Row30 (non-NT), or 1780 Front-Fold Planters.
  • Drive wheel chain shields are required on other compatible models. Order BA25697 for the 1750 Standard Planter. Order BA24093 for all planters except the 1750 Standard.

SharkTooth is a trademark of Yetter Manufacturing, Inc.

Plastic 3.0 bushel hopper and lidPlastic 3.0 bushel hopper and lid

Attachments for field conversion are available for complete seed hoppers and lids. Includes plateless and vacuum plastic 1.6 or 3.0 bushel seed hopper and lid. Seed meter, drive, and latch must be ordered separately if needed. These are for MaxEmerge™ XP rows only.

Seed packer wheelSeed packer wheel

For use when planting cotton in special growing conditions found primarily in southwestern United States.

 

Some particularly difficult soil types found in these areas are susceptible to severe ''baking and crusting'' if sufficient wind, soil moisture, temperature and sunlight conditions are present. In these situations, it is important to achieve adequate seed/soil contact while minimizing soil surface compaction.

 

Includes a wheel that runs ahead of the closing wheels to press the cotton seed into the bottom of the furrow.

 

Using the packer wheel enables the regular closing wheels to be used with a minimum force setting.

 

 

 

 

 

Wheels should not be used in the following conditions:

  • Moist soil conditions.
  • Contour planting application.
  • Reduced tillage conditions (typical corn-belt conditions).

Not compatible with:

  • Front band insecticide spreader.
  • Rear-mounted herbicide/insecticide attachments.
  • Disk closing.
Unit-mounted coulter (shown with fluted blade)Unit-mounted coulter (shown with fluted blade)

Adapts planter to plant in reduced tillage conditions.

 

Nodular iron coulter arm mounts directly to planting unit shank to utilize full unit weight for penetration.

 

Unit gauge wheels provide depth control.

 

Coulter blade is positioned directly ahead of Tru-Vee™ opener to ensure accurate tillage in seed zone.

 

Rippled or fluted blades are available to suit a wide range of tillage and soil conditions.

NOTES:

1) Not compatible with tine tooth tillage, furrower attachments, V-wing bed sweep frame-mounted coulter or unit-mounted row cleaner.

2) Ballast attachment (or fertilizer attachment) may be required for penetration.

3) BA28970 or BA28971, heavy-duty adjustable downforce springs or pneumatic downforce system, are required to provide increased coulter penetration in hard soils and also to help keep unit from bouncing when being operated on rough seedbeds. (Not included with BA30078).

4) Requires A52092 cast heavy-duty lower regular parallel arm (one row) or A84382 heavy-duty lower long parallel arm (one row) from Service Parts. Heavy-duty long parallel arm is designed for use only with the unit-mounted coulter (not for tillage tool support bracket). Cast lower parallel arms have been standard equipment for a number of years, confirm what lower parallel arm subject planter is equipped with.

Fertilizer pressure sensor for SeedStarFertilizer pressure sensor for SeedStar
PTO-driven hydraulic vacuum pumpPTO-driven hydraulic vacuum pump

A PTO-driven hydraulic pump allows operators to use the vacuum seed meter system with open-center hydraulic tractors and/or a 540 rpm or 1000 rpm PTO.  The 540 rpm PTO system is compatible with 4Row through 9Row planters and provides 3.9 gpm at 80 percent of rated speed.  The 1000 rpm PTO system is compatible with 4Row through 15Row planters and provides 5.0 gpm at 80 percent of rated speed.  Both the 540 and 1000 rpm PTO pumps are for single vacuum motors only and inadequate for dual vacuum motors systems.

 

Flat seed disks such as edible bean and sweet corn require higher levels of vacuum.  These disks require a dual vacuum motor configuration on planters over 8 rows.  Neither the 540 or 1000 rpm PTO pump is adequate for flat seed disk operation.

 

9000 Codes include an oil cooler, except with 4-row planters with 540 rpm pump. When ordering PTO pump as a bundle, you must also order the oil cooler bundle, except with the 540 rpm PTO pump for 4-row applications.

Wheel coverWheel cover

The covers for the tire rim used on the wheel module prevents rocks and other objects from becoming lodged between the rim/tire and the wheel module frame member. Lodged objects in this area could stop the wheel from rotating or tear out the tire valve stem, causing a flat tire. A U-shaped cutout in the wheel cover allows the tire pressure to be checked without removing the cover.

 

The wheel cover is not compatible with the SeedStar™ variable-rate-drive option. The wheel that has the motion sensor for the SeedStar variable-rate drive cannot be covered.

NOTE: Wheel covers are also available as service parts. For 1760 or 1770 12Row30 Planter.

Monitor System

ComputerTrak 350 ComputerTrak 350
#

The ComputerTrak 350 monitors use electronic circuitry, radar distance measuring, and a large liquid crystal display to provide sophisticated monitoring with simple operation. Along with this, the ComputerTrak 350 can monitor up to 32 rows simultaneously.

The ComputerTrak 350 monitor solution is available as an optional feature for the following planter and drill models:

 

 Drawn planters Integral plantersDrills
1750 Planter Series1700 Planter Series455
1760 Planter Series1710 Planter Series1590
1760NT Planter Series1720 8-Row and 12-Row Planters 
1770 Planter Series1730 Planter Series 

1780 Planter Series

  

 

All other planter configurations will only have SeedStar™ 2 monitoring system available with no option for the ComputerTrak 350 monitoring system.

 

ComputerTrak 350 features include:

  • Liquid crystal display provides operator with information regarding the planter function
  • High/low warning alarm provides warning limits for seed population; this allows the operator to set the upper and lower population limits at which a warning is given
  • Monitors population by row scan, by individual row, or by the minimum/average/maximum features; the minimum/average/maximum feature alternately displays row number and data for the lowest and highest population and the average population
  • Displays seed spacing or population for all rows, showing the minimum/average/maximum for all rows
  • Radar distance measuring is base equipment; this can be field calibrated by the operator for improved accuracy
  • Ground speed of the planter can be displayed
  • Non-volatile memory allows the console to be disconnected from the battery and still retain the program
  • Built-in self-diagnostics check the continuity of all monitor sensor circuits upon power-up, providing up-and-ready display
  • Console is easy to program for special planting patterns such as skip rows, etc.
  • Monitor alarm can be turned off when multiple outside planting units indicate no seed flow, such as when using the half-width disconnect
  • Enables accumulating count of seeds planted by a single row for any distance
  • Allows measuring the total distance required to plant a desired quantity of seeds
  • A second acre counter, allowing two counters of area to be used
  • Split function allows two different planter configurations; this complements the 1790 for corn and soybean operations
  • Population adjustment allows a fudge factor to be used to adjust the displayed population for situations when the calculated population is not being correctly displayed

 

NOTE: ComputerTrak 350 monitors require a radar input. Radar is ordered separately from monitor.

 

In the event of a radar or radar input failure, the ComputerTrak 350 monitor has the capability to continue with the monitoring of seed flow. If a disk-failed message occurs on this monitor, a set speed, or known as speed-set mode, can be entered to allow continued operation until the radar or radar input error has been resolved.

 

When in speed-set mode, fast average, area, and speed readouts will not be available. Row-failed messages will occur when seed count drop below two seeds per second. High- and low-population warning messages are also deactivated in this mode.

 

Also while in speed-set mode, the monitor is going to show fluctuating populations because it assumes the machine is traveling at a constant speed, even though actual populations may remain accurate at slower and faster speeds. Displayed population will only be close to actual populations when actual ground speed matches set speed.

 

To enter speed-set mode, please follow the following steps:

  1. Hold the split on/off switch while turning monitor on. A full display screen will be displayed for a few seconds and then the row-failed screen will display.
  2. Release the split on/off switch and press the setup-select switch. The speed screen will be the first displayed. The speed will be displayed in the lower right-hand corner of the display.
  3. Use the digit select and 0-9 switches to enter expected planting speed.
  4. Press the scan switch to being monitoring of seed flow.

 

If power is lost to monitor for any reason, hold the split on/off switch for one second while powering monitor on to re-enter speed-set mode. Previously entered speed is stored in memory and will not have to be re-entered.

 

NOTE: The speed-set mode is deactivated each time monitor is powered off.

Seed Hopper

Plastic 3.0 bushel hopper and lidPlastic 3.0 bushel hopper and lid

Attachments for field conversion are available for complete seed hoppers and lids. Includes plateless and vacuum plastic 1.6 or 3.0 bushel seed hopper and lid. Seed meter, drive, and latch must be ordered separately if needed. These are for MaxEmerge™ XP rows only.