We are hiring! Run with Riesterer and Schnell: Apply Today
We are hiring! Run with Riesterer and Schnell: Apply Today
Search
Choose a Location
Harvest acres faster than ever before with a 15.2-m (50-ft) hinged draper built off the proven foundation of the 700D and 700FD Drapers.
Shorten your harvest by taking full advantage of the X Series Combines’ excellent feeding capacity with this hinged draper. This can be the difference between getting the crop out of the field at the ideal time or not. Do so confidently knowing the cutterbar is far less likely to stall compared to the cutterbar system used by competitors, allowing you to enter crop head on without any hesitation.
The John Deere HDR Draper will follow your ground by pivoting, gliding, and flexing over uneven fields to provide the most accurate cut possible.
This draper hinges independently from the feederhouse to meet the lay of the land. The result is an accurate cut that picks up more crop than others, moving it into the feederhouse in an even, uniform feeding, while leaving consistent stubble height in the field.
MacDon is a trademark of MacDon Industries Ltd.
The goals for a successful harvest are simple – harvest on time and put more grain in the tank. The John Deere HDR Draper is designed to not only harvest more bushels per hour and acres per day but capture more crop.
This list of features helps you capture more crop. While other draper manufacturers would leave grain behind, the only thing you’ll see in the rearview mirror is a field with even stubble and a uniform coating of straw, allowing you to know that during the winter, your field will be ready for next year’s seed.
MacDon is a trademark of MacDon Industries Ltd.
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.
John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:
With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.
Key Specs | hd40r-rigid-cutterbar-draper Current Model |
---|---|
Cutterbar length | 12.19 m 40 ft |
Knife drive | Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
Knife speed | X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
Pickup reel operating speeds | 8-70 rpm |
Draper belts speed control | Hydraulic from cab (side belts only) |
Platform | |
Type | Hinged frame rigid cutterbar |
Cutterbar | |
Type | Straight-line knife drive system |
Length | 12.19 m 40 ft |
Knife drive | Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
Knife speed | X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
Cutterbar tilt | |
Pickup reel | |
Number of slats | Six bat poly |
Fingers | Nylon |
Diameter | 106.7 cm 42 in. |
Height control | Hydraulic |
Speed control | Hydraulic |
Reel lift | Off the cutterbar: 100.6 cm 39.6 in. |
Reel fore and aft | Fore of the cutterbar: 26.4 cm 10.4 in. |
Reel resume | Base |
Reel reverse | Base |
Operating speeds | 8-70 rpm |
Operating speeds (54-in. reel) | |
Slat reel | |
Number of slats | |
Diameter | |
Height control | |
Speed control | |
Operating speeds | |
Draper belts | |
Width | Side belts: 5.13 m 16.8 ft Center belts: 201 cm 79.1 in. |
Belt depth | 101.1 cm 39.8 in. |
Cleat height | 19.05 mm 0.75 in. |
Operating speed | Side belts (variable): 1-3.5 m/s 3.3-11.5 fps Center belts: 211 m/min 692 fpm Low-speed center belt (fixed): 4.2 m/s 13.8 ft High-speed center belt (fixed): 5.1 m/s 16.7 fps |
Speed control | Hydraulic from cab (side belts only) |
Center belt reverse | Base |
Feed drum | |
Diameter | 40.6 cm 16 in. |
Feed drum fingers | Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
Number of fingers | 18 |
Auger finger platform | Triple chevron, retracting |
Finger reach | 152 mm 6 in. |
Drum/auger reverse | Base |
Operating speed | Low speed: 200 rpm High speed: 240 rpm |
Center clean out door | Base |
Header height sensing | |
Type | Electrohydraulic |
Header height sensing on the ground | Base |
Header height sensing off the ground | Base |
Auxiliary top auger | |
Type | Optional: hydraulic drive 250-350 rpm |
Fingered augers | Optional |
Size | Diameter: 43.2 cm 17 in. |
Dimensions | |
Platform length | 13.05 m 42.8 ft |
Overall operating depth | With dividers: 3.23 m 10.6 ft |
Transport width, field position | 13.05 m 42.8 ft |
Transport width on wheel, less dividers | |
Transport length, hitch extended | |
Weight | |
Approximate weight | 4664 kg 10,261 lb With top augers, gauge wheels, side knives, and spare knife: 5011 kg 11,024 lb |
End divider rods are standard for the Hinged Draper Series. Poly end dividers are base equipment on Hinged Draper Series
If producers want to install side knives, side knife ready crop dividers must be ordered to get the gearcase within the crop divider factory installed.
End divider rods are standard for the Hinged Draper Series. Poly end dividers are base equipment on Hinged Draper Series
If producers want to install side knives, side knife ready crop dividers must be ordered to get the gearcase within the crop divider factory installed.
The toolless, quick-attach side knives enable operators to convert from cereal dividers to side knives in less than 5 minutes. This is important for operators during times of the year where they are switching between crops throughout the harvest day.
Easily lift down and lodged crops with crop lifters to ensure crop can be picked up by the reel.
Easily lift down and lodged crops with crop lifters to ensure crop can be picked up by the reel.
Minimize grain loss when straight cutting canola, oil seed, lentils, and peas with a center section seal kit.
Save $330 USD ($465 CAD) a year across 607 ha (1,500 acres) by reducing canola center section losses up to 45 percent with a center section seal kit. Maximize performance in straight-cut canola by pairing the center section seal kit with top augers.
In crops other than canola, oil seed, lentils, and peas (mainly wheat), there is an increased risk of side belt underfeeding pending conditions.
Get smooth, consistent crop feeding without bubbling up, even in high-volume and fluffy crops like canola and field peas. Large-fingered top augers grab and push crop against the draper belts, preventing it from going over the backsheet as it moves to the combine.
Speed control adjustment is located to the left- or the right-side inner gauge wheel sets top auger speed relative to side belts.
Get smooth, consistent crop feeding without bubbling up, even in high-volume and fluffy crops like canola and field peas. Large-fingered top augers grab and push crop against the draper belts, preventing it from going over the backsheet as it moves to the combine.
Speed control adjustment is located to the left- or the right-side inner gauge wheel sets top auger speed relative to side belts.
Get smooth, consistent crop feeding without bubbling up, even in high-volume and fluffy crops like canola and field peas. Large-fingered top augers grab and push crop against the draper belts, preventing it from going over the backsheet as it moves to the combine.
Speed control adjustment is located to the left- or the right-side inner gauge wheel sets top auger speed relative to side belts.
Harvest productivity can be maximized as operators no longer have to leave the cab (compared to MacDon) to set cut height with John Deere height control gauge wheels. The operator sets the desired cutting height, and the gauge wheels automatically adjust to maintain the desired cut height, resulting in improved consistency of stubble height by up to 25 percent compared to the MacDon® FD1 Draper.
Stop leaving crop in the field and achieve consistent stubble height behind the combine – an advantage for better seeding performance in no-till applications.
The position of the gauge wheels can be adjusted three different ways:
When producers are cutting off-ground with HDR gauge wheels, the header weight is distributed through the gauge wheels due to more points of contact with the ground. As a result, the weight that would traditionally be carried by the front axle and feederhouse will decrease significantly and be split between the header gauge wheel and the rear axle.
MacDon is a trademark of MacDon Industries Ltd.
Gently engage in crops with a low-profile yet strong and durable poly-tine pickup reel.
Small grains, canola, and pulse crops | Soybeans and on-ground crops | |||
Reel | Standard | Flip-over | Standard | Flip-over |
Wrapping | Better | Best | Good | Best |
Down crop | Better | Better | ||
Side belt feeding | Better | Good | Better | |
Plant tossing | Better | Good | Better | |
Shatter loss | Better | Better |