×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

25A FLAIL MOWER

Flail Mower

  • Adjustable cutting height
  • Uses a heavy-duty gearbox with a rating of 65 hp
  • Compatible with any Category 1 3-point hitch



View Product Brochure



Features



RollerRoller
#

The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.

Heavy-duty gearboxHeavy-duty gearbox
PTO drive shaftPTO drive shaft

All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.

 

The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.

Rotor and knivesRotor and knives
#

A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:

  • Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
  • Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
  • Knives pivot at their mounting points to minimize damage if an obstruction is hit.
Tractor hookupTractor hookup
#

The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).

 

iMatch compatibility starts with serial number 644700.

Specifications


Compare the specifications of up to 4 models

Key Specs 25a-flail-mower
Current Model
Cutting width
Cutting height
Blades - Number
Blades - Type
Rotor - Diameter
PTO
Tractor horsepower required - Minimum
Tractor horsepower required - Maximum
Quick-coupler compatible
Weight - Approximate
Machine
Cutting widthCentered
Centered

1.98 m
78 in.
Cutting height13 to 127 mm
0.5 to 5 in.
Hood thickness3.2 mm
0.125 in.
Blades
Number72 (36 pairs)
TypeSmooth-cut, cupped-type
Tip speed
Rotor
Speed1,850 rpm
Diameter114 mm
4.5 in.
Drives
PTO540 rpm
Gear case (cont. rating)
BeltsSingle HC section
Gauge roller140 mm
5.5 in.
Tractor HP Required
Minimum22 kW
30 hp
Maximum56 kW
75 hp
3-Point Hitch
Dimensions
Overall width2.53 m
99 in.
Overall height0.99 m
39 in.
Overall length1 m
40 in.
Weight