×
Quick Equipment Search
Equipment Fliter










used search tag

We are hiring! Run with Riesterer and Schnell: Apply Today

Search

9RX 830

Tractor

  • Engine HP: 913 hp Max1 / 830 hp Rated2
  • JD18 engine (18L)
  • e21™ PowerShift transmission
  • Fully integrated precision ag technology



View Product Brochure



Features



2X the cart load, in the hills and go 1 km/h (1 mph) faster* 2X the cart load, in the hills and go 1 km/h (1 mph) faster*

Reduce the number of times you need to fill up your cart each day. Fill it full every time and don’t worry about what operator is in the seat when you reach the hills. With 38,102 kg (84,000 lb), 619 kW (830 rated engine hp), and Auto Mode just select you set speed and let the tractor do the rest.

*Comparing a 9RX 640 with a N560F and a C850 cart filled half-way vs. a 9RX 830 with a N560F and a C850T cart filled all the way up, both operating at max engine hp. The hills ranged from 8 degrees to 12 degrees in slope.

Eliminate 1,000+ passes each fall* Eliminate 1,000+ passes each fall*

The 9RX 710, 770 and 830 give you the power needed to increase implement width, maintain consistent depth and eliminate passes which helps reduce the amount of soil compacted each season. Let John Deere help you get all your stalks ripped before the ground freezes or stay ahead of the planter in the spring.

*Calculation assumes going from a 11 shank 2730 to a 13 shank 2730 over 4500 acres with one machine.

Disk 100 more acres each day* Disk 100 more acres each day*

The 9RX 710, 770 and 830 give you the power needed to increase implement width and speed, eliminating passes which helps reduce the amount of soil compacted each season. ​Let John Deere help you quickly create a consistent finish across your field that has all the neighbors asking what piece of equipment you used to get it done.

*Claim based on internal field test data comparing a 12.2 m (40 ft) 2680H at 19.2 km/h (11.9 mph) on a 9RX 640 maxed out on power to a 13.7 m (45 ft) 2680H at 21.6 km/h (13.4 mph) on a 9RX 830 maxed out on power for 8 hours a day at 10.2 cm (4 in.) deep in corn stalks.

CommandView™ 4 Plus cab CommandView™ 4 Plus cab

The 9RX 710, 770, and 830 Tractors introduce a new in-cab experience. The CommandView 4 Plus cab offers a quiet experience as well as a smooth ride over varying field conditions, allowing for increased confidence and operator comfort in the seat.

The CommandView 4 Plus cab removed the right-hand fender, utilized on our wheeled machines, for an increase in 15 percent floor space*, allowing for more leg room as the seat swivels, space for tools, or even your lunch. With the new cab design, there is also a 20 percent increase* on your right-hand side visibility, giving you more glass to see while driving on the road or working in the field, all increasing your confidence in the cab.

Additional space inside the CommandView4 Plus Cab Additional space inside the CommandView4 Plus Cab

*Compared to CommandView 4 cab

9RX 830 9RX 830

The John Deere 9RX 710, 770, and 830 tractors are powered by the John Deere JD18 (18L) engine. The JD18 engine was designed to meet Final Tier 4 and Stage V emission standards by utilizing Exhaust Gas Recirculation (EGR) technology, allowing these machines to run solely on diesel fuel (no DEF). This allows for increased uptime with one step fueling.

Additionally, increase uptime with the Fast Fill System option available on 9RX 710, 770 and 830 models, similar to that of the Fast Fill System available on the X9 combine. This option is available from the factory and allows the 1949-L (515-gal.) fuel tank to be filled in just under 4 minutes*.

*Fast Fill System runs at 568 L/min (150 gpm). For additional information on Fast Fill system, please see Engine Option story in the Engine tile.

636 L/min (168 gpm) with triple pump option 636 L/min (168 gpm) with triple pump option

This is flow that will wash the competition away. Don’t compromise on fan speed or tractor speed anymore. This tractor has it all. Not only will it deliver the flow you need today but will also prepare you to have enough flow for future implement needs. The optional Intelligent Power Management (IPM) senses when the pumps are putting out high flow and unlocks up to another 30 kW (40 hp) on the tractor to keep your system at its peak performance.

Specifications


Key Specs 9rx-830
Current Model
Engine descriptionJD18 (John Deere 18L)
Engine displacement18 L
1098 cu in.
Rated engine power
Maximum engine power
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628)610 kW
830 hp
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628)672 kW
913 hp
Rated PTO power (hp SAE)249 kW
385 hp
Rated value listed occurs when tractor is stationary
Maximum PTO power
Transmission typeJohn Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager: 40 km/h
25 mph
Hydraulic pump rated outputSingle: 212 L/min
56 gpm
Dual: 424 L/min
112 gpm
Triple: 636 L/min
168 gpm
Rear hitch category (SAE designation)
Base machine weight33,500 kg
74,000 lb
Engine specifications
DescriptionJD18 (John Deere 18L)
Engine typeIn-line six, six-cylinder
Engine family
Rated speed1900 rpm
AspirationDual turbochargers in series; Primary fixed displacement turbocharger and secondary wastegated turbocharger, air-to-air aftercooling, and cooled exhaust gas recirculation (EGR)
Cylinders linersWet-sleeve
Emission levelFinal Tier 4 (FT4) / Stage V Compliant Diesel Engine
After treatment typeExhaust Gas Recirculation (EGR) - No Diesel Exhaust Fluid (DEF) used
Displacement18 L
1098 cu in.
Engine performance
Rated power
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628)610 kW
830 hp
Rated PTO power (hp SAE)249 kW
335 hp
Rated value listed occurs when tractor is stationary
Maximum PTO power
Intelligent Power Management (IPM)40 hp at rated engine RPM
Power boost10 percent
Maximum engine power
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628)672 kW
913 hp
Engine peak torqueAt 1400 rpm: 4234 Nm
3123 lb-ft
Drawbar power
PTO torque rise38 percent at 1400 rpm
Fuel injection system and control
Air cleaner type
Transmission
TypeJohn Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager: 40 km/h
25 mph
Integrated Electric Power Generation
Reverser
Clutch; wet/dry
Creeper
Hydraulic system
TypeAxial piston, closed-center, pressure-and-flow compensated, naturally-aspirated
Pump rated outputSingle: 212 L/min
56 gpm
Dual: 424 L/min
112 gpm
Triple: 636 L/min
168 gpm
Available flow at a single rear SCV1.3-cm (1/2 in.) couplers: 140 L/min
35 gpm
1.9-cm (3/4-in.) couplers: 180 L/min
44 gpm
Available flow at front SCVs
Number of rear selective control valves (SCVs)Base: four 1.3-cm (1/2-in.) couplers
Optional: five or six 1.3-cm (1/2-in.) couplers
Optional: three 1.9-cm (3/4-in.) couplers and three 1.3-cm (1/2-in.) couplers
7th and 8th SCV options are available as field install kits
Number of mid selective control valves (SCVs)
Number of front selective control valves (SCVs)
Joystick SCV control
Auxiliary hydraulic features
SCV controlElectronic
Rear hitch
Hitch draft control load sense type
Remote control valves available
Hitch category (SAE designation)
Maximum lift capacity behind lift points
Lift capacity at standard frame
Sensing type
Rear axle differential lock
Drawbar
Drawbar categoryCategory 5
Maximum vertical load8618 kg
19,000 lb
Rear power take-off (PTO)
Type45 mm (1.75 in.) 20-spline, 1000 rpm
Engine rpm (at rated PTO speeds)
Economy PTO speeds
Reverse PTO speeds
Multispeed PTO option availability
Ground speed PTO option availability
PTO actuationElectrohydraulic
Front hitch
Category
Electric power
Standard lift capacity
Front power take-off (PTO)
PTO speed
Rear axle
Type
Final drive typeOutboard planetary with three planetary gears
Differential controls
Axle type
Brakes, type and control
Rear differential lockFull-locking electrohydraulic
Load rating
Front axle
Type
Front axle differential lockFull-locking electrohydraulic
Load rating
Tires
Front
Rear
Wheel tread range
Turning radius with brakesTurning radius calculated off rear axle centerline
679.5 cm
22.3 ft
Turning radius without brakes
Central Tire Inflation System (CTIS)
Tracks
Tread spacingOnly compatible with 762 mm (30 in.) tracks: 2235 mm
88 in.
Optional: 3048 mm
120 in.
Drive typeCamso ® Ag 3500 or 6500 Tracks
Track widthStandard: 762 mm
30 in.
Optional - only compatible with 3048 mm (120 in.) spacing: 914 mm
36 in.
Mid-rollersThree
Steering
Brakes
Primary brake (foot brake)
Secondary brake
Park lock
MFWD braking
Front axle brakes
Auxiliary brakes
Hydraulic trailer brakes
Pneumatic trailer brakes
Electrical system
Alternator size330 amp
Battery options12 V
Working lightsVaries by visibility package
Type of bulb in headlight (Halogen, Zenon, LED)Select Visibility: Halogen: 65 W
Premium and Ultimate Visibility: LED
Type of bulb in beacon (Halogen, Zenon, LED)
dB(A) rating for backup alarm
Total cold cranking amps5 x 925 CCA
Total: 4625 CCA
Operator station
Rollover protective structure, OOS
SeatDegree of seat swivel, left hand
Select Comfort and Convenience: 8 degree
Premium and Ultimate Comfort and Convenience: 25 degree
Degree of seat swivel, right hand
Select/Premium/Ultimate Comfort ahd Convenience: 40 degrees
Cab suspensionStandard
Instructional seatStandard
DisplayStandard: G5Plus CommandCenter™: 32.5 cm
12.8 in.
RadioVaries by comfort and convenience package
Inner cab volume3.37 m3
119 cu ft
dB(A) rating
Cab glass area6.86 m2
73.81 sq ft
Safety glass rating
Front visibility
Dimensions
WheelbaseDistance from the center of the front drive sprocket to the center of the rear drive sprocket: 4620 mm
15.2 ft
Overall width
Overall length8829 mm
28.75 ft
Overall height
Drawbar clearance567 mm
22.3 in.
Front axle center
Approximate shipping weight, Open;Cab223.5-cm (88-in.) tread spacing with 76.2-cm (30-in.) tracks: 33,500 kg
74,000 lb
304.8-cm (120-in.) tread spacing with 91.4-cm (36-in.) tracks: 34,473 kg
76,000 lb
Weight
Base machine weight2235-mm (88-in.) tread spacing with 762-mm (30-in.) tracks: 33,566 kg
74,000 lb
3048-mm (120-in.) tread spacing with 914-mm (36-in.) tracks: 34,473 kg
76,000 lb
Maximum ballast level38,100 kg
84,000 lb
Maximum permissible weight
Capacities
Crankcase oil volume71.5 L
18.9 U.S. gal.
Fuel tank1952 L
515 U.S. gal.
Diesel exhaust fluid (DEF) tank
Cooling system117 L
30.9 U.S. gal.
Transmission-hydraulic systemDrivetrain (Transmission and axle) 2235-mm (88-in.) spacing: 201 L
53 U.S. gal.
Drivetrain (Transmission and axle) 3048-mm (88-in.) spacing: 226 L
60 U.S. gal.
Serviceability
Interval for engine oil change500 hours
Interval for hydraulic/transmission oil changeHydraulic system: 4000 hours (Filters at 2000 hours)
Transmission oil and filters: 2000 hours
Interval for engine coolant change6000 hours or 6 years
Loaders
Loader
Lift capacity at full height
Maximum lift height
Leveling type
Precision AG
GuidanceIntegrated AutoTrac™
Available with Autonomy Ready
TelematicAvailable with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnosticsAvailable with activated JDLink hardware and activations
Miscellaneous
AutoTrac ready
ISOBUS ready
CommandCenter video inputs
Immobilizer
Side slope rating
Uphill/downhill slope rating
Country of manufactureUSA